For light duty spray-down applications, attach these wash guns to any standard garden hose.

Use these guns to clean as well as apply chemicals and solvents.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.

Clean and sanitize surfaces with the power of steam—with or without detergents and other chemicals.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Replace the disposable spray heads on these guns after each use for the performance of a new spray gun without having to clean them. High-volume/low-pressure sprayers produce less overspray than other air-powered sprayers to minimize paint waste.

These cups let you see how much paint is left. Keep extras ready for easy color changes while spraying.

These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

These efficient hand-held sprayers produce low overspray, so they waste less paint than our other electric sprayers. Use them to spray thin paint, stains, and lacquers.

Spray paint and light coatings at twice the rate of our light duty electric paint sprayers. These sprayers are portable and have a lightweight spray gun for big projects.

Keep paint spray guns in good condition.

Control both air and paint flow while you spray, so you can vary the line thickness as you work.

These premium nozzles are engineered for the most efficient airflow consumption.

Control consumption and noise by adjusting the airflow.

Attach to your blowgun to direct airflow.

These needle-style nozzles force air to a precise pinpoint.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

Adjust airflow to control consumption and noise.

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

These sprayers have a more durable construction than our other plastic hand-pump sprayers.

Carry these sprayers comfortably on your back using the padded shoulder straps.

Wheel these electric-powered sprayers wherever needed to disinfect surfaces and equipment in bathrooms, schools, gyms, and worksites without any manual pumping.

Fill the reservoir, attach the propellant cartridge, and spray.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

These nozzles have replaceable tips that are removable with a quarter-turn.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

These nozzles project their spray at a right angle from their threaded connection.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.

These nozzles produce a flat, thin spray pattern.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

These nozzles provide a uniform distribution of droplets.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

Use these nozzles with detergent that’s diluted in water to create a rotating, multi-directional foam spray for effectively rinsing tanks, drums, and small vessels.

Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.

To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.

Only for use with 3M dual cartridges, these guns dispense two-part adhesives.

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

Guns are powered with compressed air for controlled dispensing on small and large jobs alike.