Push-In Rivets
No installation tools required—use your thumb to push these rivets into place from one side of the material. To remove, pop them out with a removal tool (sold separately). Made of nylon, rivets absorb environmental moisture, which can affect dimensions and other properties.
For technical drawings and 3-D models, click on a part number.
Split shank rivets have a rounded shank that compresses to slide through a hole and then expands.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Temperature Range, °F | Material | Choose a Color | Pkg. Qty. | Pkg. | |
| 0.115" | 0.2" | 0.093" | No. 42 | 0.25" | 0.04" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 000000 | |
| 0.121" | 0.226" | 0.115" | No. 32 | 0.205" | 0.034" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.121" | 0.274" | 0.2" | No. 7 | 0.469" | 0.05" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.125" | 0.262" | 0.165" | No. 19 | 0.344" | 0.043" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.135" | 0.27" | 0.115" | No. 32 | 0.205" | 0.025" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.156" | 0.281" | 0.2" | No. 7 | 0.469" | 0.052" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.156" | 0.291" | 0.115" | No. 32 | 0.205" | 0.029" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.235" | 0.305" | 0.115" | No. 32 | 0.203" | 0.04" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.25" | 0.356" | 0.115" | No. 32 | 0.205" | 0.039" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.25" | 0.437" | 0.245" | D | 0.594" | 0.06" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.365" | 0.552" | 0.245" | D | 0.594" | 0.07" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.48" | 0.655" | 0.245" | D | 0.594" | 0.07" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 | |
| 0.556" | 0.709" | 0.18" | No. 15 | 0.344" | 0.071" | -40° to 145° | Nylon Plastic | 100 | 000000000 | 00000 |
Slide these tools under the head of plastic push-in rivets and squeeze the handles to pop the rivet out. They are also known as panel clip pliers.
| Lg. | Wd. | Ht. | Max. Jaw Opening | Each | |
| 9" | 2 1/2" | 4 1/2" | 1 1/2" | 000000000 | 000000 |
Nickel-Plated Steel Split Rivets
The nickel-plated finish provides good corrosion resistance. These rivets require access to both sides of the material. To install, use the rounded end of a ball peen hammer to bend the legs outward to hold your material.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Pkg. Qty. | Pkg. | |
9/64" Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.125"-0.187" | 0.313" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 00000 |
| 0.156"-0.25" | 0.375" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 0000 |
| 0.218"-0.312" | 0.438" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 00000 |
| 0.25"-0.375" | 0.5" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 00000 |
| 0.375"-0.5" | 0.625" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 00000 |
| 0.5"-0.625" | 0.75" | 0.141" | No. 27 | 0.313" | 0.047" | 100 | 000000000 | 00000 |
Brass Split Rivets
Brass rivets are electrically conductive and have good corrosion resistance. They require access to both sides of the material. To install, use the rounded end of a ball peen hammer to bend the legs outward to hold your material.
For technical drawings and 3-D models, click on a part number.