McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    284 Products

    Split Lock Washers
    3D CAD models available

    Image of Product. Front orientation. Lock Washers. Split-Lock Washer.
    Stop nuts and screws from loosening due to mild vibration. As you tighten, the uneven ends bite into the nut or screw so it won't back out. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these washers have a dark, matte coating to create a finished look. They won't rust in wet and outdoor environments, but can't hold up to harsh chemicals as well as 316 stainless steel.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Blue-Dyed Steel—These metric-sized washers have a distinctive blue color, so you can easily tell them apart from inch washers. The coating provides only minimal corrosion resistance, so these washers are best for dry environments.
    Steel—Best for dry environments since moisture will cause these washers to rust.
    Corrosion-Resistant Galvanized Steel—These washers combine the strength of steel with the rust resistance of stainless steel. They're an alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    Super-Corrosion-Resistant Silicon Bronze—The choice for marine environments, these washers won't rust or deteriorate when submerged in salt water. They resist corrosion as well as 316 stainless steel, but are not quite as strong.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk., mm
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M2
    2.44.40.4 to 0.6DIN 127B10000000000000000
    M2.5
    2.95.10.5 to 0.7DIN 127B1000000000000000
    M2.6
    3.05.20.5 to 0.7DIN 127B1000000000000000
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M3.5
    3.96.70.7 to 0.9DIN 127B1000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B1000000000000000
    M7
    7.512.81.5 to 1.7DIN 127B500000000000000
    M8
    8.514.81.9 to 2.1DIN 127B1000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B10000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B5000000000000000
    M14
    14.724.12.8 to 3.2DIN 127B2500000000000000
    M16
    17.027.43.3 to 3.7DIN 127B2500000000000000
    M18
    19.029.43.3 to 3.7DIN 127B100000000000000
    M20
    21.233.63.8 to 4.2DIN 127B100000000000000
    M22
    22.535.93.8 to 4.2DIN 127B50000000000000
    M24
    25.540.04.8 to 5.2DIN 127B1000000000000000
    M27
    27.543.04.8 to 5.2DIN 127B500000000000000
    M30
    31.748.25.8 to 6.2DIN 127B10000000000000
    M36
    37.758.25.8 to 6.2DIN 127B10000000000000
     
    Black-Oxide 18-8 Stainless Steel
    M2
    2.44.40.4 to 0.6DIN 127B100000000000000
    M2.5
    2.95.10.5 to 0.7DIN 127B100000000000000
    M3
    3.46.20.7 to 0.9DIN 127B100000000000000
    M5
    5.49.21.1 to 1.3DIN 127B100000000000000
    M6
    6.511.81.5 to 1.7DIN 127B100000000000000
    M8
    8.514.81.9 to 2.1DIN 127B100000000000000
    M10
    10.718.12.0 to 2.4DIN 127B100000000000000
    M12
    12.721.12.3 to 2.7DIN 127B100000000000000
    M16
    17.027.43.3 to 3.7DIN 127B100000000000000
    M20
    21.233.63.8 to 4.2DIN 127B1000000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    M2
    2.44.40.4 to 0.6DIN 127B1000000000000000
    M2.5
    2.95.10.5 to 0.7DIN 127B1000000000000000
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M3.5
    3.96.70.7 to 0.9DIN 127B1000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B1000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B1000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B500000000000000
    M12
    12.721.12.3 to 2.7DIN 127B5000000000000000
    M14
    14.724.12.8 to 3.2DIN 127B250000000000000
    M16
    17.027.43.3 to 3.7DIN 127B100000000000000
    M18
    19.029.43.3 to 3.7DIN 127B100000000000000
    M20
    21.233.63.8 to 4.2DIN 127B100000000000000
    M24
    25.540.04.8 to 5.2DIN 127B50000000000000
    M30
    31.748.25.8 to 6.2DIN 127B10000000000000
     
    Zinc-Plated Steel
    M2
    2.44.40.4 to 0.6DIN 127B1000000000000000
    M2.5
    2.95.10.5 to 0.7DIN 127B1000000000000000
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M3.5
    3.66.70.7 to 0.9DIN 127B1000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B1000000000000000
    M7
    7.512.81.5 to 1.7DIN 127B1000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B1000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B1000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B10000000000000000
    M14
    14.724.12.8 to 3.2DIN 127B10000000000000000
    M16
    17.027.43.3 to 3.7DIN 127B5000000000000000
    M18
    19.029.43.3 to 3.7DIN 127B2500000000000000
    M20
    21.233.63.8 to 4.2DIN 127B2500000000000000
    M22
    22.535.93.8 to 4.2DIN 127B1000000000000000
    M24
    25.540.04.8 to 5.2DIN 127B2500000000000000
    M27
    28.543.04.8 to 5.2DIN 127B1000000000000000
    M30
    31.748.25.8 to 6.2DIN 127B1000000000000000
    M33
    33.555.25.8 to 6.2DIN 127B500000000000000
    M36
    37.758.25.8 to 6.2DIN 127B500000000000000
    M42
    43.768.26.8 to 7.2DIN 127B100000000000000
    M48
    50.575.06.8 to 7.2DIN 127B100000000000000
     
    Zinc-Yellow-Chromate-Plated Steel
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B1000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B1000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B10000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B500000000000000
    M14
    14.724.12.8 to 3.2DIN 127B5000000000000000
    M16
    17.027.43.3 to 3.7DIN 127B250000000000000
    M18
    19.029.43.3 to 3.7DIN 127B2500000000000000
    M20
    21.233.63.8 to 4.2DIN 127B100000000000000
    M24
    25.540.04.8 to 5.2DIN 127B100000000000000
    M30
    31.748.25.8 to 6.2DIN 127B500000000000000
     
    Black-Oxide Steel
    M6
    6.511.81.5 to 1.7DIN 127B10000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B10000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B500000000000000
    M16
    17.027.43.3 to 3.7DIN 127B250000000000000
     
    Blue-Dyed Steel
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M4
    4.57.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.212.12.0ASME B18.21.2M10000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B500000000000000
    M8
    8.215.22.5ASME B18.21.2M1000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B500000000000000
    M10
    10.218.02.9ASME B18.21.2M500000000000000
    M10
    10.718.12.0 to 2.4DIN 127B250000000000000
    M12
    12.321.73.8ASME B18.21.2M10000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B250000000000000
    M16
    16.427.94.8ASME B18.21.2M2500000000000000
    M16
    17.027.43.3 to 3.7DIN 127B2500000000000000
    M20
    20.533.85.7ASME B18.21.2M100000000000000
    M20
    21.233.63.8 to 4.2DIN 127B100000000000000
    M24
    24.540.77.2ASME B18.21.2M1000000000000000
     
    Steel
    M2
    2.44.40.4 to 0.6DIN 127B1000000000000000
    M2.5
    2.95.10.5 to 0.7DIN 127B1000000000000000
    M3
    3.46.20.7 to 0.9DIN 127B1000000000000000
    M3.5
    3.96.70.7 to 0.9DIN 127B1000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B1000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B1000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B1000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B1000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B1000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B1000000000000000
    M14
    14.724.12.8 to 3.2DIN 127B10000000000000000
    M16
    17.027.43.3 to 3.7DIN 127B5000000000000000
    M18
    19.029.43.3 to 3.7DIN 127B5000000000000000
    M20
    21.233.63.8 to 4.2DIN 127B2500000000000000
    M24
    25.540.04.8 to 5.2DIN 127B2500000000000000
    M30
    31.748.25.8 to 6.2DIN 127B500000000000000
    M36
    37.758.25.8 to 6.2DIN 127B10000000000000
     
    Corrosion-Resistant Galvanized Steel
    M6
    6.511.81.5 to 1.7DIN 127B500000000000000
    M8
    8.514.81.9 to 2.1DIN 127B5000000000000000
    M10
    10.718.12.0 to 2.4DIN 127B5000000000000000
    M12
    12.721.12.3 to 2.7DIN 127B250000000000000
    M16
    17.027.43.3 to 3.7DIN 127B100000000000000
    M20
    21.233.63.8 to 4.2DIN 127B10000000000000
     
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    M6
    6.511.81.5 to 1.7DIN 127B250000000000000
    M8
    8.514.81.9 to 2.1DIN 127B2500000000000000
    M10
    10.718.12.0 to 2.4DIN 127B2500000000000000
     
    Super-Corrosion-Resistant Silicon Bronze
    M3
    3.46.20.7 to 0.9DIN 127B10000000000000000
    M4
    4.47.60.8 to 1.0DIN 127B10000000000000000
    M5
    5.49.21.1 to 1.3DIN 127B10000000000000000
    M6
    6.511.81.5 to 1.7DIN 127B5000000000000000
    M8
    8.514.81.9 to 2.1DIN 127B2500000000000000
    M10
    10.718.12.0 to 2.4DIN 127B100000000000000
     

    Split Lock Washers for Socket Head Screws
    3D CAD models available

    Image of Product. Front orientation. Lock Washers. For Socket Head Screws, Split-Lock Washer.
    Stop socket head screws from loosening due to mild vibration. These washers have a small diameter to fit under screws with narrow heads, but are still thick enough to keep fasteners secure. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads. Also known as high-collar lock washers.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M3
    3.45.60.9 to 1.1DIN 798010000000000000000
    M3.5
    3.96.10.9 to 1.1DIN 79801000000000000000
    M4
    4.47.01.1 to 1.3DIN 79801000000000000000
    M5
    5.48.81.5 to 1.7DIN 79801000000000000000
    M6
    6.59.91.5 to 1.7DIN 79801000000000000000
    M8
    8.512.71.9 to 2.1DIN 79801000000000000000
    M10
    10.716.02.3 to 2.7DIN 798010000000000000000
    M12
    12.718.02.3 to 2.7DIN 7980500000000000000
    M14
    14.721.12.8 to 3.2DIN 7980100000000000000
    M16
    17.024.43.3 to 3.7DIN 7980100000000000000
    M18
    19.026.43.3 to 3.7DIN 7980100000000000000
    M20
    21.230.64.3 to 4.7DIN 79801000000000000000
    M22
    23.532.94.3 to 4.7DIN 7980500000000000000
    M24
    25.535.94.8 to 5.2DIN 798050000000000000
    M30
    31.744.15.8 to 6.2DIN 7980100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    M3
    3.45.60.9 to 1.1DIN 79801000000000000000
    M4
    4.47.01.1 to 1.3DIN 79801000000000000000
    M5
    5.48.81.5 to 1.7DIN 79801000000000000000
    M6
    6.59.91.5 to 1.7DIN 79801000000000000000
    M8
    8.512.71.9 to 2.1DIN 7980500000000000000
    M10
    10.716.02.3 to 2.7DIN 79805000000000000000
    M12
    12.718.02.3 to 2.7DIN 79802500000000000000
    M14
    14.721.12.8 to 3.2DIN 7980100000000000000
    M16
    17.024.43.3 to 3.7DIN 7980100000000000000
    M18
    19.026.43.3 to 3.7DIN 7980100000000000000
    M20
    21.230.64.3 to 4.7DIN 798010000000000000
    M22
    23.532.94.3 to 4.7DIN 798010000000000000
    M24
    25.535.94.8 to 5.2DIN 798010000000000000
    M30
    31.744.15.8 to 6.2DIN 7980100000000000000
     
    Zinc-Plated Steel
    M3
    3.45.60.9 to 1.1DIN 79801000000000000000
    M4
    4.47.01.1 to 1.3DIN 79801000000000000000
    M5
    5.48.81.5 to 1.7DIN 79801000000000000000
    M6
    6.59.91.5 to 1.7DIN 79801000000000000000
    M8
    8.512.71.9 to 2.1DIN 79801000000000000000
    M10
    10.716.02.3 to 2.7DIN 798010000000000000000
    M12
    12.718.02.3 to 2.7DIN 798010000000000000000
    M14
    14.721.12.8 to 3.2DIN 79805000000000000000
    M16
    17.024.43.3 to 3.7DIN 7980250000000000000
    M18
    19.026.43.3 to 3.7DIN 79802500000000000000
    M20
    21.230.64.3 to 4.7DIN 7980100000000000000
    M24
    25.535.94.8 to 5.2DIN 7980100000000000000
    M27
    28.538.94.8 to 5.2DIN 798050000000000000
    M30
    31.744.15.8 to 6.2DIN 7980500000000000000
    M36
    37.752.26.7 to 7.3DIN 798010000000000000
     
    Zinc-Yellow-Chromate-Plated Steel
    M4
    4.17.01.1 to 1.3DIN 79801000000000000000
    M5
    5.18.81.5 to 1.7DIN 7980250000000000000
    M6
    6.19.91.5 to 1.7DIN 79801000000000000000
    M8
    8.112.71.9 to 2.1DIN 79801000000000000000
    M10
    10.216.02.3 to 2.7DIN 798010000000000000000
    M12
    12.218.02.3 to 2.7DIN 798010000000000000000
    M16
    16.224.43.3 to 3.7DIN 79802500000000000000
     
    Black-Oxide Steel
    M3
    3.45.60.9 to 1.1DIN 79801000000000000000
    M3.5
    3.96.10.9 to 1.1DIN 79801000000000000000
    M4
    4.47.01.1 to 1.3DIN 79801000000000000000
    M5
    5.48.81.5 to 1.7DIN 79801000000000000000
    M6
    6.59.91.5 to 1.7DIN 79801000000000000000
    M8
    8.512.71.9 to 2.1DIN 79801000000000000000
    M10
    10.716.02.3 to 2.7DIN 798010000000000000000
    M12
    12.718.02.3 to 2.7DIN 798010000000000000000
    M14
    14.721.12.8 to 3.2DIN 798010000000000000000
    M16
    17.024.43.3 to 3.7DIN 79805000000000000000
    M18
    19.026.43.3 to 3.7DIN 7980250000000000000
    M20
    21.230.64.3 to 4.7DIN 79802500000000000000
    M22
    23.532.94.3 to 4.7DIN 7980100000000000000
    M24
    25.535.94.8 to 5.2DIN 79801000000000000000
    M27
    28.538.94.8 to 5.2DIN 798050000000000000
    M30
    31.744.15.8 to 6.2DIN 7980500000000000000
    M36
    37.752.26.7 to 7.3DIN 798010000000000000
    M42
    43.760.27.7 to 8.3DIN 7980100000000000000
    M48
    50.567.07.7 to 8.3DIN 7980100000000000000
     

    Split Lock Washer Assortments

    Image of Product. Front orientation. Lock Washers. Sold as Assortments, Split-Lock Washer.
    Keep a collection of common lock washers on hand to stop nuts and screws from loosening due to mild vibration. These washers have split ends that bite into the fastener to keep it secure. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads.
    Labels in the lid include our part numbers, so it's easy to replenish the assortments.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Steel—Best for dry environments since moisture will cause these washers to rust.
    No. of
    Pieces
    Sizes Included
    Specs.
    Met
    Container
    Type
    Each
    18-8 Stainless Steel
    755For M3 to M20 Screw SizesDIN 127BPlastic Box0000000000000000
     
    Steel
    755For M3 to M20 Screw SizesDIN 127BPlastic Box00000000000000
     

    Wave Spring Lock Washers
    3D CAD models available

    Image of Product. Front orientation. Lock Washers. Wave Washer, Spring Lock Washer.
    The wavy shape flexes like a spring to keep nuts and screws secure on slightly uneven surfaces. These washers add a small amount of tension to stop fasteners from backing out due to mild vibration. While they don't hold as well as other lock washers, they do grip slightly better than curved washers. They work best in electrical panels, light fixtures, and other light duty assemblies. Since these washers hold their shape when untightened, you can reuse them a handful of times without losing strength.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    DIN 128B—These washers have split ends that bite into your material surface for a tighter hold than other wave washers.
    For Screw
    Size
    No. of
    Waves
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Overall
    Ht., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M4
    14.47.60.71.4DIN 128B50000000000000000
    M5
    15.49.20.91.7DIN 128B250000000000000
    M6
    16.511.81.22.2DIN 128B250000000000000
    M8
    18.514.81.52.7DIN 128B250000000000000
    M10
    110.718.11.73.1DIN 128B2500000000000000
    M12
    112.721.11.93.6DIN 128B100000000000000
    M16
    117.027.42.65.1DIN 128B10000000000000
     
    Zinc-Plated Steel
    M3
    13.16.20.61.1DIN 128B1000000000000000
    M4
    14.17.60.71.2DIN 128B1000000000000000
    M5
    15.19.20.91.5DIN 128B1000000000000000
    M6
    16.111.81.22DIN 128B10000000000000000
    M8
    18.114.81.52.5DIN 128B10000000000000000
    M10
    110.218.11.72.9DIN 128B5000000000000000
    M12
    112.221.12.03.4DIN 128B250000000000000
    M14
    114.224.12.43.9DIN 128B2500000000000000
    M16
    116.227.42.74.5DIN 128B2500000000000000
    M18
    118.229.42.74.5DIN 128B100000000000000
    M22
    122.535.93.05.1DIN 128B50000000000000
    M24
    124.540.03.86.5DIN 128B500000000000000
     

    Curved Spring Lock Washers
    3D CAD models available

    Image of Product. Front orientation. Lock Washers. Curved Washer, Spring Lock Washer.
    The curvy, spring-like shape adds a small amount of tension to prevent nuts and screws from backing out due to mild vibration. These washers also flex slightly to compensate for uneven surfaces. While more secure than a standard flat washer, these have the least amount of gripping power of all our lock washers. They are best suited for electrical panels, light fixtures, and other light duty assemblies. These washers hold their shape when untightened, so you can reuse them a handful of times without losing strength.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these washers to rust.
    DIN 128A—These washers have split ends that bite into your material surface for a tighter hold than other curved washers.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Overall
    Ht., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M2.5
    2.65.10.50.9DIN 128A10000000000000000
    M3
    3.16.20.61.1DIN 128A1000000000000000
    M4
    4.17.60.71.2DIN 128A1000000000000000
    M5
    5.19.20.91.5DIN 128A10000000000000000
    M6
    6.111.81.22DIN 128A10000000000000000
    M8
    8.114.81.52.5DIN 128A500000000000000
    M10
    10.218.11.72.9DIN 128A5000000000000000
    M12
    12.221.12.03.4DIN 128A5000000000000000
    M14
    14.224.12.33.9DIN 128A2500000000000000
    M16
    16.227.42.74.5DIN 128A2000000000000000
    M18
    18.229.42.74.5DIN 128A1000000000000000
    M20
    20.233.63.05.1DIN 128A1000000000000000
    M22
    22.535.93.05.1DIN 128A500000000000000
    M24
    24.540.03.86.5DIN 128A500000000000000
     
    Zinc-Plated Steel
    M2.5
    2.65.10.50.9DIN 128A10000000000000000
    M3
    3.16.20.61.1DIN 128A1000000000000000
    M4
    4.17.60.71.2DIN 128A1000000000000000
    M5
    5.19.20.91.5DIN 128A1000000000000000
    M6
    6.111.81.22DIN 128A10000000000000000
    M8
    8.114.81.52.5DIN 128A10000000000000000
    M10
    10.218.11.72.9DIN 128A10000000000000000
    M12
    12.221.12.03.4DIN 128A5000000000000000
    M14
    14.224.12.33.9DIN 128A2500000000000000
    M16
    16.227.42.74.5DIN 128A2500000000000000
    M18
    18.229.42.74.5DIN 128A100000000000000
    M20
    20.233.63.05.1DIN 128A1000000000000000
    M22
    22.535.93.05.1DIN 128A1000000000000000
    M24
    24.540.03.86.5DIN 128A1000000000000000
    M30
    30.548.25.89.5DIN 128A10000000000000
     
    Zinc-Yellow-Chromate-Plated Steel
    M3
    3.16.20.61.1DIN 128A1000000000000000
    M3.5
    3.66.70.61.1DIN 128A1000000000000000
    M4
    4.17.60.71.2DIN 128A1000000000000000
    M5
    5.19.20.91.5DIN 128A1000000000000000
    M6
    6.111.81.22DIN 128A1000000000000000
    M8
    8.114.81.52.5DIN 128A1000000000000000
    M10
    10.218.11.72.9DIN 128A10000000000000000
    M12
    12.221.12.03.4DIN 128A500000000000000
    M14
    14.224.12.33.9DIN 128A2500000000000000
    M16
    16.227.42.74.5DIN 128A1000000000000000
    M20
    20.233.63.05.1DIN 128A1000000000000000
     
    Black-Oxide Steel
    M3
    3.16.20.61.1DIN 128A1000000000000000
    M4
    4.17.60.71.2DIN 128A1000000000000000
    M5
    5.19.20.91.5DIN 128A1000000000000000
    M6
    6.111.81.22DIN 128A500000000000000
    M8
    8.114.81.52.5DIN 128A500000000000000
    M10
    10.218.11.72.9DIN 128A2500000000000000
    M12
    12.221.12.03.4DIN 128A100000000000000
    M16
    16.227.42.74.5DIN 128A100000000000000
    M20
    20.233.63.05.1DIN 128A50000000000000
    M24
    24.540.03.86.5DIN 128A500000000000000
     
    Steel
    M2.5
    2.34.60.61.1DIN 69052000000000000000
    M3
    2.75.60.71.3DIN 69052000000000000000
    M4
    3.67.00.81.4DIN 690520000000000000000
    M5
    4.68.61.01.7DIN 690510000000000000000
    M6
    5.511.01.32.2DIN 69055000000000000000
    M8
    7.414.01.62.8DIN 69055000000000000000
    M10
    9.317.01.83.2DIN 69051000000000000000
    M12
    11.019.72.13.7DIN 69051000000000000000
     
    back to top