Hinged for adjustability, these wrenches fit a range of diameters.

Reverse the pins when you need to fit different hole sizes on the face of collars, bearings, and other machine tool components.

Change out the pins to fit a different hole size.

Fit these wrenches into slots on the circumference of collars, bearings, and other machine tool components.

In addition to a long handle, these wrenches include two heads with different hook widths.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of stainless steel, these wrenches have excellent corrosion resistance.

These wrenches are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

The head pivots to accommodate a range of diameters.

Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

An extra-long handle provides access to hard-to-reach fasteners and increases leverage.

A lever reverses the ratchet direction.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Suitable for occasional maintenance work, these sets are imported.

These wrenches are made of stainless steel for excellent corrosion resistance.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Pivot the box end for access to fasteners in tight spots.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Suitable for occasional maintenance work, these sets are imported.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

These lightweight tools are also known as AN (Army-Navy) wrenches.

The slim head fits into tight spaces and around thin fasteners.

One head is angled for access to hard-to-reach fasteners. These are also known as ignition wrenches.

When turning fasteners in small spaces, these short wrenches fit where others can't.

Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.

The head is offset 45° to provide additional clearance when reaching over obstructions.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Made of stainless steel, these wrenches have excellent corrosion resistance.

One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Fit the narrow head into tight spaces and around thin fasteners.

When turning fasteners in small spaces, these short wrenches fit where others can't.

The handle is covered in rubber for a comfortable grip.

No need to pull the socket off the tool—push a button to release.

Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side.

When the ratchet head becomes worn or damaged, change it out for a new one.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

No need to pull the socket off the tool—push a button to release.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

The L shape provides clearance when reaching over obstructions.

A rubber coating provides a comfortable grip.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These wrenches have an accuracy of ±2.0%.

Measure with an accuracy of ±2%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Reach nuts obstructed by a fluid line or other barrier with these wrench heads.

Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Turn sockets with a bit screwdriver.

Convert your socket into a flex socket to access fasteners from an angle.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Convert your socket into a flex socket to access fasteners from an angle.

Set a desired torque within the range.

Change a standard wrench handle into a ratcheting wrench.

Convert from one square drive size to another.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Pull the collar to quickly attach and remove sockets.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Convert your impact socket into a flex socket to access fasteners from an angle.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

Grip more of your fastener head with these wrench heads.

Get a strong grip in tight areas, even on fasteners that are rounded or damaged.

Convert from one square drive size to another.

Turn lug bolts on car and truck wheels. These wrenches have a different socket size at each end.

Pivot the socket end to access hard-to-reach fasteners.

The jaws on these wrenches are shaped to turn slip nuts, jam nuts, and large hex nuts.

Press the lever to lock the jaw and keep these wrenches clamped on your work, leaving your hands free.

These wrenches are made of stainless steel for excellent corrosion resistance.

These tools have the heavy duty handle and adjustment mechanism of a pipe wrench and the smooth jaws of a traditional adjustable wrench.

An insulated handle protects against accidental contact with live electrical circuits. These wrenches are tested to 1,000 volts to meet IEC 60900.

Extend the handle for additional reach.

Turn fasteners with the firm grip of a wrench and the adjustability of pliers.

A ratchet mechanism in the head allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

The handles are covered in plastic for a comfortable grip.