Screwdrivers
These standard screwdrivers can be found in every tool box.
Drilled spanner drivers fit screws that have two drilled holes.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/940/94062a116p2-a07a-digital@halfx_637098975518817606.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/a07/a07a-drilled-spanner-digital-master1574346247-p9@halfx_637099215585171129.png?ver=imagenotfound)
Shaft | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Screw Size | For Screw Head Diameter | For Hole Center-to-Center | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Each | |
No. 4 | 0.183"-0.235" | 0.094" | 8" | 4" | 1/4" | Steel | Plastic | 000000000 | 000000 |
No. 6 | 0.266"-0.29" | 0.125" | 8" | 4" | 1/4" | Steel | Plastic | 000000000 | 00000 |
No. 8 | 0.306"-0.322" | 0.156" | 8" | 4" | 1/4" | Steel | Plastic | 000000000 | 00000 |
No. 10 | 0.313"-0.399" | 0.188" | 8" | 4" | 1/4" | Steel | Plastic | 000000000 | 00000 |
No. 12 | 0.357"-0.454" | 0.218" | 8" | 4" | 1/4" | Steel | Plastic | 000000000 | 00000 |
No. 14 | 0.414"-0.525" | 0.25" | 8" | 4" | 5/16" | Steel | Plastic | 000000000 | 00000 |
Screwdriver Sets
Sets include an assortment of screwdrivers.
Drilled spanner drivers fit screws that have two drilled holes.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/940/94062a121-@halfx_637311892425391441.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/a07/a07a-drilled-spanner-digital-master1556742505-p9@halfx_636923301613795636.png?ver=imagenotfound)
Number of Pieces | Includes | Handle Material | Container Type | Material | Each | |
3 | Drilled Spanner Screw Remover for No. 6 (1/8" Ctr.-to-Ctr.)—8" O'all Lg. Drilled Spanner Screw Remover for No. 8 (5/32" Ctr.-to-Ctr.)—8" O'all Lg. Drilled Spanner Screw Remover for No. 10 (3/16" Ctr.-to-Ctr.)—8" O'all Lg. | Plastic | Plastic Pouch | Steel | 000000000 | 000000 |
4 | Drilled Spanner Screw Remover for No. 6 (1/8" Ctr.-to-Ctr.)—8" O'all Lg. Drilled Spanner Screw Remover for No. 8 (5/32" Ctr.-to-Ctr.)—8" O'all Lg. Drilled Spanner Screw Remover for No. 10 (3/16" Ctr.-to-Ctr.)—8" O'all Lg. Drilled Spanner Screw Remover for No. 14 (7/32" Ctr.-to-Ctr.)—8" O'all Lg. | Plastic | Plastic Pouch | Steel | 000000000 | 00000 |
Bit Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/5829a35-@halfx_1687203959.png?ver=imagenotfound)
Insert a bit into the shaft and a magnet holds it in place.
Tamper-resistant hex are also known as pin-in-hex.
Tamper-resistant Torx are also known as pin-in-Torx.
Shaft | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | O'all Lg. | Lg. | O'all Wd. | Shaft | Bit | Handle | Grip Style | Features | Each | |
For 1/4" Bit Hex Shank Size | |||||||||||
26 | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2mm, 2.5mm, 3mm, 5mm Tamper-Reistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40 Torq Set®: No. 6, No. 8, No. 10 | 8 1/2" | 3 3/8" | 5/16" | Stainless Steel | Steel | Plastic | Plain | Bit storage inside tool | 0000000 | 000000 |
Drilled Spanner Bits
![](/prerenderstable/mvPRE/contents/gfx/imagecache/527/52775a22p1-upa07-@halfx_637655841289818063.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/723/7230a57p1-upa07-@halfx_637655840432936747.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/a07/a07a-drilled-spanner2-digital-master1574346247-p9@halfx_637099215339575260.png?ver=imagenotfound)
Use with screws that have two drilled holes.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For Screw Size | For Hole Center-to-Center | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 0.1" | 1" | Steel | 00000000 | 00000 |
No. 6 | 0.134" | 1" | Steel | 00000000 | 0000 |
No. 8 | 0.164" | 1" | Steel | 00000000 | 0000 |
No. 10 | 0.198" | 1" | Steel | 00000000 | 0000 |
No. 12 | 0.215" | 1" | Steel | 00000000 | 0000 |
No. 14, 1/4" | 0.259" | 1" | Steel | 00000000 | 0000 |
1/4" Hex Shank Size for Power Tools | |||||
No. 4 | 0.108" | 2" | Steel | 0000000 | 0000 |
No. 6 | 0.162" | 2" | Steel | 0000000 | 0000 |
No. 8 | 0.186" | 2" | Steel | 0000000 | 0000 |
No. 10 | 0.209" | 2" | Steel | 0000000 | 0000 |
No. 12 | 0.223" | 2" | Steel | 0000000 | 0000 |
No. 14 | 0.259" | 2" | Steel | 0000000 | 0000 |
No. 16 | 0.373" | 2" | Steel | 0000000 | 0000 |
No. 18 | 0.49" | 2" | Steel | 0000000 | 0000 |
No. 20 | 0.508" | 2" | Steel | 0000000 | 0000 |
5/16" Hex Shank Size | |||||
No. 6 | 0.162" | 1 1/4" | Steel | 0000000 | 0000 |
No. 8 | 0.186" | 1 1/4" | Steel | 0000000 | 0000 |
No. 10 | 0.209" | 1 1/4" | Steel | 0000000 | 0000 |
No. 12 | 0.223" | 1 1/4" | Steel | 0000000 | 0000 |
No. 14, 1/4" | 0.25" | 1 1/2" | Steel | 0000000 | 0000 |
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
![]() | ![]() Hex | ![]() Tamper-Resistant Hex | ![]() Phillips | ![]() Slotted | ![]() Torx | ![]() Square |
![]() Drilled Spanner | ![]() Pozidriv® | ![]() Tamper-Resistant Torx | ![]() Torq-Set® | ![]() Tri-Wing® |
No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
---|---|---|---|---|---|---|
30 | 26 Bits 3 Adapters 1 Drive Tool | Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" T25, T27, T30, T40 (1" O'all Lg.) 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 000000 |
39 | 36 Bits 2 Adapters 1 Drive Tool | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Phillips: No. 1, No. 2 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) T25, T27, T30, T40 (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
Drilled Spanner Bit Sets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/527/52775a31p2-a07a-digital@halfx_637098991741100675.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/723/7230a54p1-a07a-digital@halfx_637099000870394519.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/a07/a07a-drilled-spanner2-digital-master1574346247-p9@halfx_637099215339575260.png?ver=imagenotfound)
Use with screws that have two drilled holes.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Components Included | Bits Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
6 Bits | Drilled Spanner for 0.134" Ctr.-to-Ctr.: No. 6 (1" O'all Lg.)—2 ea. Drilled Spanner for 0.164" Ctr.-to-Ctr.: No. 8 (1" O'all Lg.)—2 ea. Drilled Spanner for 0.198" Ctr.-to-Ctr.: No. 10 (1" O'all Lg.)—2 ea. | Steel | __ | 00000000 | 000000 |
1/4" Hex Shank Size for Power Tools | |||||
4 Bits | Drilled Spanner for 0.108" Ctr.-to-Ctr.: No. 4 (2" O'all Lg.)—1 ea. Drilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (2" O'all Lg.)—1 ea. Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (2" O'all Lg.)—1 ea. Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (2" O'all Lg.)—1 ea. | Steel | Plastic Pouch | 0000000 | 00000 |
5/16" Hex Shank Size | |||||
7 Bits | Drilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (1 1/4" O'all Lg.)—2 ea. Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (1 1/4" O'all Lg.)—2 ea. Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (1 1/4" O'all Lg.)—2 ea. Drilled Spanner for 0.223" Ctr.-to-Ctr.: No. 12 (1 1/4" O'all Lg.)—1 ea. | Steel | Plastic Pouch | 0000000 | 00000 |