Sanitary Threaded Standoffs
Mount components onto food processing lines, walls, and sanitary equipment while leaving space to clean in between. These standoffs have a smooth finish and rounded edges to eliminate pits or crevices where bacteria could grow. Made of 304 stainless steel, they won’t corrode from frequent washdowns with harsh cleaners and sanitizers. A rubber seal stops water and contaminants from entering the body of these standoffs. They are FDA compliant for safe contact with food.
Tapered standoffs are shaped so there are no crevices between their tapered end and small, mounted objects, such as pipe. They also have a lower mounting profile than standard standoffs.
For technical drawings and 3-D models, click on a part number.
Tapered Standoffs
(Front)
Tapered Standoffs
(Back)
| Lg. | Thread Size | Threading | Thread Lg. | Temperature Range, °F | Specifications Met | Each | |
304 Stainless Steel with Silicone Rubber Seal | |||||||
|---|---|---|---|---|---|---|---|
1 3/16" OD | |||||||
| 1" | 1/4"-20 | Fully Threaded | 1" | -75° to 390° | FDA Compliant 21 CFR 177.2600 | 000000000 | 000000 |
| 1" | 3/8"-16 | Fully Threaded | 1" | -75° to 390° | FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 2" | 1/4"-20 | Fully Threaded | 2" | -75° to 390° | FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 2" | 3/8"-16 | Fully Threaded | 2" | -75° to 390° | FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
Heavy Duty Tapered Shims
Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims. For extra stability, screw through the center mounting hole. Also known as pinion shims.
For technical drawings and 3-D models, click on a part number.
Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | (A) | (B) | Lg. | Wd. | Mounting Hole Dia. | Min. Hardness | Magnetic Properties | Each | |
| 6063 Aluminum | 1/8" | 5/16" | 5" | 2" | 1/2" | Not Rated | Nonmagnetic | 000000000 | 000000 |
Breakaway Tapered Shims
Easily snap off any excess to get the length you need. Use these shims to align cabinets, doors, and windows, or for other rough leveling.
Dimpled shims have breaks every ½ inch. They resist splitting when nailed or screwed, so they’re best to use when hammering is needed.
Lined shims are marked every 1/8 inch for clean, precise breaks.
For technical drawings and 3-D models, click on a part number.
Thick. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Lg. | Wd. | Score Interval | Color | Temp. Range | Pkg. Qty. | Pkg. | |
Dimpled Composite | |||||||||
| 1/16" | 1/4" | 7 1/2" | 1 1/2" | 1/2" | Beige | Not Rated | 12 | 000000 | 00000 |
Lined Composite | |||||||||
| 1/16" | 1/4" | 7 1/2" | 1 1/2" | 1/8" | Beige | Not Rated | 12 | 0000000 | 0000 |
Smooth Wood | |||||||||
| 1/16" | 3/16" | 3 1/2" | 1" | __ | __ | Not Rated | 50 | 000000 | 0000 |
| 1/16" | 1/4" | 6" | 1 3/8" | __ | __ | Not Rated | 9 | 000000 | 0000 |
| 1/16" | 1/4" | 8" | 1 3/8" | __ | __ | Not Rated | 12 | 0000000 | 0000 |
| 1/16" | 1/4" | 12" | 1 3/8" | __ | __ | Not Rated | 42 | 0000000 | 0000 |
Slotted Tapered Shims
The slot lets you install these rigid shims around screws. Shims are made of plastic to resist moisture and prevent rot. Use them to align cabinets, doors, and windows, or for other rough leveling.
For technical drawings and 3-D models, click on a part number.
Tapered Shims
Ridges keep these shims from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.
Shims are made of plastic to resist moisture and prevent rot. Polypropylene shims are rigid. PVC shims are flexible.
For technical drawings and 3-D models, click on a part number.
Thick. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Lg. | Wd. | Mounting Hole Dia. | Color | Temp. Range | Pkg. Qty. | Pkg. | |
PVC Plastic | |||||||||
| 1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Clear | 175° F | 10 | 000000000 | 000000 |
| 1/32" | 1/4" | 2" | 1 1/4" | 1/8" | White | 175° F | 10 | 000000000 | 0000 |
| 1/32" | 15/32" | 3 1/2" | 1 3/16" | 1/8" | Clear | 175° F | 2 | 000000000 | 0000 |
Polypropylene Plastic | |||||||||
| 1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Black | 440° F | 30 | 000000000 | 00000 |
| 1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Clear | 440° F | 10 | 000000000 | 00000 |
| 1/32" | 15/32" | 3 1/2" | 1 3/16" | 1/8" | Clear | 440° F | 2 | 000000000 | 0000 |