Tackle roofing and other heavy duty heating applications—these torches have a BTU output starting at nearly seven times the output of standard propane torches.

These torches have approximately half the BTU output of standard propane torches for use in light duty applications.

Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.

Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.

Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.

The low profile of these torches saves bench space and the wide, heavy base adds stability.

Use this solder for general purpose applications.

Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.

Electrically conductive, this solder is best for electronics and electronics applications.

This solder is commonly used in solder melting pots.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

The flux leaves minimal residue so there's no cleanup.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Composed of pure tin, this solder is safe for use with food service equipment.

Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

The flux leaves minimal residue so there's no cleanup.

Without a flux core, this solder allows you to choose the flux that works best for your application.

Solder aluminum to itself, copper, or brass.

Often used to solder aluminum to difficult-to-solder metal such as stainless steel and nickel, this flux works in applications up to 800° F.

This flux causes solder to flow in a thin film to create joints using minimal solder.

Specially formulated, this Nokorode flux remains soft and sticky in temperatures down to -4° F and protects your solder joint from corrosion.

Protect the solder joint from corrosion with this flux paste.

Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.

This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.

This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.

The flux residue easily washes away with water.

Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.

These cordless irons run on butane gas, so you don't have to recharge a battery between uses.

These irons put an extra layer of cork insulation between your hand and the iron.

From electronics to metal sealing, these irons handle intermittent soldering jobs.

These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.

Solder a connection without touching it by melting the solder with hot air.

Automatically feed solder wire to the tip of your iron.

A rechargeable battery powers these irons.

Tinner removes excess oxide and replenishes the tip’s original coating.

Sensor-activated brushes remove oxides, debris, and excess solder from soldering tips without damaging their plating. Insert your soldering tip to automatically start cleaning.

Electric multispark discharge means these lighters never need flints, batteries, or charging.

Three flints, no waiting—when one flint wears out, rotate the holder to get a fresh one.

Push the button to create a continuous flame.