We will reply to your message within an hour.
Choose from a variety of screwdriver, flat, conical, chisel, bevel, needle, and knife tips.
Solder with complete control over the temperature—these stations let you adjust as you go.
These irons come with one fixed temperature tip—to adjust the temperature, change out the tip.
These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature.
From electronics to metal sealing, these irons handle intermittent soldering jobs.
Use these irons for your high-volume jobs.
Combine a handle, a heating element, and a tip to create the iron you need.
These irons put an extra layer of cork insulation between your hand and the iron.
Ultra thin, these irons are for precise soldering in electronics applications.
These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.
These guns heat up the instant you pull the trigger and cool down quickly when you let go.
Kits include a gun, tips for a variety of applications, solder, and a wrench.
Pull the trigger for instant heat; release it and the gun cools quickly.
A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts.
Adjust the tip temperature to suit your application using a button control.
Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.
These cordless irons run on butane gas, so you don't have to recharge a battery between uses.
Kits include an iron, tips for a variety of applications, a stand, a sponge, and a cap.
Solder in spaces that are difficult to reach without waiting for a battery to charge.
Safely rest hot soldering irons when they're not in use.
The tray and sponge are included for cleaning the tips.
These irons run on AA batteries and are for intermittent use.
With the push of a button, these irons convert from a straight grip to a pistol grip with either a 45° or 90° head angle. Battery power and no cord means you can take them where you need them.
A rechargeable battery powers these irons.
Traditionally used for sheet metal work, heat the heads of these coppers with an external flame source and they store enough heat to complete long joints.
Touch the tip of your soldering iron for a fast, accurate temperature reading. Within about five seconds, you'll know how hot the iron is, so you can decide whether it's ready for your particular soldering material and application.
Vacuum suction removes heated, liquid solder from sensitive components.
These braids have a flux core for lead-free and electrical solder applications.
Without a flux core, these braids allows you to choose the flux that works best for your application.
The fast-heating tip liquefies the solder and a built-in vacuum pump draws it into a disposable filter.
Also known as solder suckers, these tools remove heated, liquid solder.
Tinner removes excess oxide and replenishes the tip’s original coating.
Bar cleaner removes heavy oxidation from soldering tips and coppers.
Remove oxidation from soldering tips with these dry brass-wool balls.
Sensor-activated brushes remove oxides, debris, and excess solder from soldering tips without damaging their plating. Insert your soldering tip to automatically start cleaning.
For applications such as printed circuit boards, switches, and heat sinks, these removers get rid of any residue left behind by no-clean flux.
Hold a sponge for cleaning soldering iron tips.
Scrape away solder buildup to keep desoldering nozzles clean.
The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.
Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.
The flux leaves minimal residue so there's no need for cleanup.
The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.
Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.
Wash away flux residue from this solder with water.
Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.
Electrically conductive, this solder is best for electronics and electronics applications.
This solder is commonly used in solder melting pots
This solder is commonly used in solder melting pots.
The high melting point prevents remelting when soldering successive joints with another solder.
Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.
Use this solder for general purpose applications.
Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..
Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.
This solder meets NSF/ANSI Standard 61 for drinking water.
Composed of pure tin, this solder is safe for use with food service equipment.
The silver in this solder helps it resist vibration to form strong joints in HVAC systems. Since it doesn’t have a flux core, you can choose the flux that works best for your application.
The flux leaves minimal residue so there's no cleanup.
This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.
The flux residue easily washes away with water.
This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.
Without a flux core, this solder allows you to choose the flux that works best for your application.
Flux is not required for this solder to form strong joints.
This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.
Fill this dispenser with the flux of your choice to prepare electrical assemblies and printed circuit boards for soldering.
This flux has less cleaning action, but leaves the least amount of residue.
This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.
With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.
Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.
Use this flux for plumbing applications.
This flux is the fastest to remove from plumbing pipelines.
This flux causes solder to flow in a thin film to create joints using minimal solder.
Fortified with tin, this flux protects nondrinking water pipes from oxidation, especially under temperatures up to 600° F.
Specially formulated, this Nokorode flux remains soft and sticky in temperatures down to -4° F and protects your solder joint from corrosion.
A special formulation of Nokorode soldering flux, this flux remains thick at temperatures up to 115° F and protects your solder joint from corrosion.
Protect the solder joint from corrosion with this flux paste.
Often used on metal that is difficult to solder, this flux works with stainless steel, Monel, and Inconel.
Solder aluminum to itself, copper, or brass.
Often used to solder aluminum to difficult-to-solder metal such as stainless steel and nickel, this flux works in applications up to 800° F.
Prepare workpieces for low-temperature lead-free soldering. This flux leaves minimal residue, so there’s no cleanup required.
Keep your solder spools organized.
Also known as solder slugs, these pellets create strong, electrically conductive connections between battery terminal lugs and cable.
These torches handle brazing and soldering, as well as heating jobs.
Tackle roofing and other heavy duty heating applications—these torches have a BTU output starting at nearly seven times the output of standard propane torches.
Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.
The torch tip rotates 360° to put the heat exactly where you need it.
These torches have approximately half the BTU output of standard propane torches for use in light duty applications.
Connect these torches to a propane cylinder for light-duty flame applications.
Access overhead and other hard-to-reach applications.
Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.
Solder, desolder, and handle light brazing with these torches.
This torch includes a standard solder tip as well as a heat tip for applications that require heat without an exposed flame.
Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.
The low profile of these torches saves bench space and the wide, heavy base adds stability.
Get flame temperatures from these torches that are capable of cutting, welding, and brazing steel up to 3/16" thick.
Kits include a torch handle, tips, and a regulator.
Butane burns cleaner than propane at similar temperatures. Use it in heating, thawing, and soldering applications.
Ignite your gas torch with these hands-free lighters—they rest on a bench or tabletop, leaving you free to hold solder, workpieces, and other tools.
Electric multispark discharge means these lighters never need flints, batteries, or charging.
Pull the trigger to get a spark.
Strike the flint to generate a spark.
Three flints, no waiting—when one flint wears out, rotate the holder to get a fresh one.
Push the button to create a continuous flame.
Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.
Solder won’t stick to these assorted picks, which are used for positioning circuit board components.
Position circuit board components without solder sticking to these picks.
Made of either plastic or wood, the picks in these sets won’t nick or scratch sensitive components or soft materials.
Avoid nicking or scratching sensitive components. These picks are good for adjusting small wires or separating press-fit plastic components.
These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
The assorted tools in these sets are used to hold, separate, and position wire, springs, and other small parts.
Use these tools to hold, separate, and position wire, springs, and other small parts.
The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.
The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.
Reach around obstructions and into tight spaces with picks that have long, angled tips. Use these tools to hold, separate, and position wire, springs, and other small parts.
Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.
Hold, separate, and position small parts with one tool. These sets include assorted picks with a different tip at each end.
Sets include a handle and an assortment of tips for holding and positioning wire, springs, and other small parts.
A different tip at each end allows you to install, extract, and position parts with one tool.
Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Similar to dental instruments, these needle-sharp picks are suitable for work around delicate circuits and components.
The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.
A precision tip on each end of these picks lets you install, extract, and position parts around delicate circuits and components with one tool. The needle-sharp tips are similar to dental tools.
Install, extract, and position parts around delicate circuits and components with the precision tip on each end of the picks in these sets. The needle-sharp tips are similar to dental tools.
The tacky surface on these positioners picks up lightweight objects, such as tiny springs and wire, to help you place and install them.
Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.
The assorted picks in these sets are used to install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.
A different tip at each end installs and positions tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.
Attach these installation tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic. When the plastic cools, it solidifies around the insert to keep it secure.
Extract heat-set inserts by attaching these tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic to loosen the insert so it can be removed.