Choose from a variety of screwdriver, flat, conical, chisel, bevel, needle, and knife tips.

Ultra thin, these irons are for precise soldering in electronics applications.

A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts.

The tray and sponge are included for cleaning the tips.

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

The flux leaves minimal residue so there's no need for cleanup.

Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.

Electrically conductive, this solder is best for electronics and electronics applications.

This solder is commonly used in solder melting pots.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

Use this solder for general purpose applications.

Composed of pure tin, this solder is safe for use with food service equipment.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

The silver in this solder helps it resist vibration to form strong joints in HVAC systems. Since it doesn’t have a flux core, you can choose the flux that works best for your application.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

The flux leaves minimal residue so there's no cleanup.

Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.

Without a flux core, this solder allows you to choose the flux that works best for your application.

This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.

This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.

With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.

The flux residue easily washes away with water.

Often used to solder aluminum to difficult-to-solder metal such as stainless steel and nickel, this flux works in applications up to 800° F.

Use this flux for plumbing applications.

This flux causes solder to flow in a thin film to create joints using minimal solder.

Specially formulated, this Nokorode flux remains soft and sticky in temperatures down to -4° F and protects your solder joint from corrosion.

Protect the solder joint from corrosion with this flux paste.

Bar cleaner removes heavy oxidation from soldering tips and coppers.

Sensor-activated brushes remove oxides, debris, and excess solder from soldering tips without damaging their plating. Insert your soldering tip to automatically start cleaning.

Hold a sponge for cleaning soldering iron tips.

Scrape away solder buildup to keep desoldering nozzles clean.

Position your circuit board at a comfortable angle when attaching components.

Use both hands to position and solder components to your circuit board.