Soldering Iron Holders | McMaster-Carr

Filter by

Clamp Type

Power Source

Jaw Texture

Length

Tip Shape

Number of Clamps

Iron Wattage

REACH Compliance

Arm Length

RoHS Compliance

Jaw Type

Body Material

DFARS Compliance

Holding Capacity

Voltage

Manufacturer Model Number

For Maximum Iron Barrel Diameter

Jaw Width

Maximum Tip Temperature

Wattage

Tip Manufacturer Series

Jaw Material

Working Distance

Forward

How can we improve?

128 Products

Soldering Iron Stands

Safely rest hot soldering irons when they're not in use.

For Max. Iron Barrel Dia.	For Max. Iron Wattage	Dia.	Lg.		Each
2 5/8"	700W	1 1/2"	5 1/2"	0000000	000000

Soldering Iron Stands with Sponge Tray

Safely rest hot soldering irons when they're not in use. The tray and sponge are included for cleaning the tips.

	For Iron Wattage				Tray
For Max. Iron Barrel Dia.	Min.	Max.	ID	Lg.	Lg.	Wd.	Includes	Features		Each
1/2"	15W	60W	3/4"	7 1/4"	4 1/2"	3 1/2"	4 1/2" Lg. × 3 1/2" Wd. Sponge with Single Hole	5" long protective coil	0000000	0000000

Replacement Sponges (Pkg. of 10)

0000000

Pkg.

000000

Adjustable-Temperature Soldering Stations

Solder with complete control over the temperature—these stations let you adjust as you go. Choose your station based on the wattage of the iron. Irons with lower wattages are best for work on parts that require precision and high heating efficiency, such as delicate electronic components. Irons with higher wattages are best for heavy parts and thick wires that require large solder joints.

Styles D-F have USB connections that allow you to connect to a computer to adjust settings, such as standby temperature and automatic shut-off timing. They also let you log soldering data and update station firmware. Style E includes two irons that can be operated at the same time. Style F includes one iron and one tweezer, which can also be used simultaneously. Tweezers are commonly preferred over irons for fine work that requires high energy demands, such as soldering and desoldering surface-mount devices.

Style A

Chisel Tip

A Display

			Tip
Iron Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Includes		Each
Weller WT1013
120V AC
80W	95W	1°	Chisel	150°	850°	3/32"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Sponge One Scouring Scrubber One Stand	0000000	0000000

Style B

Screwdriver Tip

B Display

			Tip
Iron Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Specifications Met	Includes		Each
Weller WE1010NA
120V AC
70W	85W	1°	Screwdriver	200°	850°	1/16"	Plug	Continuous	28 sec.	Three Prong	UL Listed	One Tip One Iron One Sponge One Stand	0000000	0000000

Style C

Chisel Tip

C Display

			Tip
Iron Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Includes		Each
Weller WT1010
120V AC
90W	95W	1°	Chisel	150°	850°	3/32"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Sponge One Scouring Scrubber One Stand	00000000	0000000
Weller WT1011
120V AC
65W	95W	1°	Chisel	150°	850°	1/16"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Sponge One Scouring Scrubber One Stand	00000000	000000

Style D

Chisel Tip

D Display

			Tip
Iron Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Includes		Each
Weller WX1010
120V AC
120W	200W	1°	Chisel	200°	850°	3/64"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Scouring Scrubber One Stand	00000000	0000000
Weller WX1011
120V AC
40W	200W	1°	Chisel	200°	850°	3/32"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Scouring Scrubber One Stand	00000000	000000
Weller WX1012
120V AC
65W	200W	1°	Chisel	200°	850°	1/16"	Plug	Continuous	10 sec.	Three Prong	One Tip One Iron One Scouring Scrubber One Stand	00000000	000000

Style E

Chisel Tip

E Display

			Tip
Iron Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Includes		Each
Weller WX2020
120V AC
120W	200W	1°	Chisel	200°	850°	3/32"	Plug	Continuous	10 sec.	Three Prong	Two Scouring Scrubbers Two Tips Two Irons Two Stands	00000000	000000000

Style F

Chisel Tip

Chisel Tweezer Tip

F Display

				Tip
Iron Wattage	Tweezer Wattage	Wattage	Display Increments	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Duty Cycle	Approx. Heat-Up Time	Plug Type	Includes		Each
Weller WX2021
120V AC
40W	40W	200W	1°	Chisel Chisel Tweezer	200°	850°	3/64" 1/32"	Plug	Continuous	10 sec.	Three Prong	Two Scouring Scrubbers One Iron One Iron Tip One Pair of Tweezer Tips One Soldering Tweezer Two Stands	00000000	000000000

Replacement Irons

Replacement Iron

		Tip
For Soldering Station	Wattage	Shape	Min. Temp., °F	Max. Temp., °F	Point Wd.	Connection Type	Manufacturer	Manufacturer Model Number	For Tip Series	Duty Cycle	Approx. Heat-Up Time	Includes		Each
WE1010NA	70W	Screwdriver	200°	850°	1/16"	Plug	Weller	WEP70	ET	Continuous	28 sec.	Tip	0000000	000000
WT1013, WT1010, WT1011	65W	Chisel	150°	850°	1/16"	Plug	Weller	WP65	XNT	Continuous	10 sec.	Tip	00000000	000000
WT1013, WT1010, WT1011	80W	Chisel	150°	850°	3/32"	Plug	Weller	WP80	LT	Continuous	10 sec.	Tip	00000000	000000
WT1013, WT1010, WT1011	90W	Chisel	150°	850°	1/16"	Plug	Weller	WTP90	XNT	Continuous	10 sec.	Tip	00000000	000000
WX1010, WX1011, WX1012, WX2020, WX2021	40W	__	200°	850°	__	Plug	Weller	WXMP MS	RT MS	Continuous	10 sec.	__	00000000	000000
WX1010, WX1011, WX1012, WX2020, WX2021	65W	Chisel	200°	850°	1/16"	Plug	Weller	WXP65	XNT	Continuous	10 sec.	Tip	00000000	000000
WX1010, WX1011, WX1012, WX2020, WX2021	120W	Chisel	200°	850°	3/32"	Plug	Weller	WXP120	XT	Continuous	20 sec.	Tip	00000000	000000

Replacement Soldering Tweezers

		Tip
For Soldering Station	Wattage	Min. Temp., °F	Max. Temp., °F	Connection Type	Manufacturer	Manufacturer Model Number	For Tip Series	Duty Cycle	Approx. Heat-Up Time		Each
WX1010, WX1011, WX1012, WX2020, WX2021	40W	200°	850°	Plug	Weller	WXMT MS	RTW MS	Continuous	10 sec.	00000000	0000000

Replacement Stands

Replacement Stand

For Iron		For Soldering Tweezer
Wattage	Manufacturer Model No.	Wattage	Manufacturer Model No.	Includes		Each
__	__	40W	WXMT MS	One Scouring Scrubber	00000000	0000000
40W	WXMP MS	__	__	One Scouring Scrubber	00000000	000000
65W, 80W, 120W	WP65, WSP80, WXP120	__	__	One Scouring Scrubber	00000000	000000
65W, 80W, 120W	WP65, WSP80, WXP120	__	__	One Scouring Scrubber, One Sponge	00000000	000000
70W	WEP70	__	__	One Sponge	00000000	00000
90W	WTP90	__	__	One Sponge	00000000	000000

Tips

Chisel

Round

Conical

Single Flat

30° Round

Bevel

Gullwing

Knife

45° Knife

25° Conical

30° Conical

Product regulations restrict sales to the listed jurisdictions/areas.

	Tip
For Soldering Station (with Handpiece)	Manufacturer Model No.	Shape	Lg.	Point Wd.		Each
Weller ET Series
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETA	Chisel	1 3/8"	1/16"	0000000	00000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETAA	Round	1 3/8"	1/16"	00000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETB	Chisel	1 3/8"	3/32"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETC	Chisel	1 3/8"	1/8"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETD	Chisel	1 3/8"	3/16"	00000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETH	Conical	1 3/8"	1/32"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETJ	Conical	1 3/4"	1/32"	00000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETL	Chisel	1 3/4"	5/64"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETM	Chisel	1 3/4"	1/8"	00000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETO	Conical	1 3/4"	1/32"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETP	Round	1 3/8"	1/32"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETR	Chisel	1 3/8"	1/16"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETS	Conical	1 3/4"	1/64"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETT	Conical	1 3/8"	1/64"	0000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETU	Single Flat	1 1/2"	1/64"	00000000	0000
EC1002, EC2002, MC5001, DEC-1000 (with EC1201A), WES50/51 (with PES50/51), WE1010NA (with WEP70)	ETV	Single Flat	1 1/2"	1/32"	00000000	0000
Weller LT Series
WT1013, WT1010, WT1011	1L	Conical	1 1/32"	1/64"	00000000	0000
WT1013, WT1010, WT1011	1SA	Round	19/32"	1/64"	00000000	0000
WT1013, WT1010, WT1011	1SLX	30° Round	55/64"	1/64"	00000000	00000
WT1013, WT1010, WT1011	4	Bevel	19/32"	3/64"	00000000	0000
WT1013, WT1010, WT1011	22CP	Bevel	25/32"	5/64"	00000000	0000
WT1013, WT1010, WT1011	33CP	Bevel	25/32"	1/8"	00000000	00000
WT1013, WT1010, WT1011	BB	Bevel	21/32"	3/32"	00000000	00000
WT1013, WT1010, WT1011	CC 60	Bevel	21/32"	1/8"	00000000	00000
WT1013, WT1010, WT1011	DD 45	Bevel	25/32"	5/32"	00000000	00000
WT1013, WT1010, WT1011	F	Bevel	33/64"	15/32"	00000000	0000
WT1013, WT1010, WT1011	GW1	Gullwing	45/64"	3/64"	00000000	0000
WT1013, WT1010, WT1011	GW2	Gullwing	45/64"	1/8"	00000000	00000
WT1013, WT1010, WT1011	KN	Knife	21/32"	5/64"	00000000	00000
WT1013, WT1010, WT1011	KNSL	45° Knife	21/32"	5/64"	00000000	00000
WT1013, WT1010, WT1011	LT1S	Round	5/8"	1/64"	0000000	0000
WT1013, WT1010, WT1011	LTA	Chisel	3/8"	1/16"	0000000	0000
WT1013, WT1010, WT1011	LTAS	Round	3/8"	1/16"	0000000	0000
WT1013, WT1010, WT1011	LTB	Chisel	1/2"	3/32"	0000000	0000
WT1013, WT1010, WT1011	LTC	Chisel	1/2"	1/8"	0000000	0000
WT1013, WT1010, WT1011	LTCS	Round	1/2"	1/8"	0000000	0000
WT1013, WT1010, WT1011	LTD	Chisel	1/2"	3/16"	00000000	0000
WT1013, WT1010, WT1011	LTK	Chisel	13/16"	3/64"	00000000	0000
WT1013, WT1010, WT1011	LTL	Chisel	13/16"	5/64"	00000000	0000
WT1013, WT1010, WT1011	LTS	Conical	13/16"	1/64"	00000000	0000
Weller RT-MS Series
WX1010, WX1011, WX1012, WX2020, WX2021	1NWMS	Conical	25/32"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	1SCMS	Chisel	25/32"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	3MS	Chisel	25/32"	3/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	3XMS	30° Chisel	1 7/64"	3/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	9MS	Chisel	61/64"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	10GWMS	Gullwing	53/64"	5/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	11MS	Chisel	3/4"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	12MS	25° Conical	1 3/64"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	13MS	30° Conical	1 3/64"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	14MS	Conical	4 21/64"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	15MS	Conical	4 25/64"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	KNMS	Knife	4 13/32"	17/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	RT8MS	Chisel	3/4"	3/32"	00000000	00000
Weller RTW-MS Series
WX1010, WX1011, WX1012, WX2020, WX2021	1MS	45° Conical	55/64"	1/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	2MS	45° Chisel	55/64"	1/32"	00000000	00000
Weller XT Series
WX1010, WX1011, WX1012, WX2020, WX2021	F 30	Bevel	1 29/64"	3/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	BS	Round	1 29/64"	3/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	AA 60	Bevel	1 29/64"	1/16"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	BB 45	Bevel	1 29/64"	3/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	BSC	Chisel	1 27/64"	3/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	BSL	Chisel	1 27/64"	3/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	BX	30° Chisel	1 13/32"	5/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	CC 45	Bevel	1 29/64"	1/8"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	CS	Round	1 29/64"	1/8"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	CSL	Chisel	1 27/64"	1/8"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	D 45	45° Chisel	1 29/64"	1/4"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	DL	Chisel	1 37/64"	3/16"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	DS	Round	1 3/8"	3/16"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	GW1	Gullwing	1 29/64"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	GW2	Gullwing	1 29/64"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	H	Chisel	1 29/64"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	HX	Chisel	1 1/2"	1/32"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	KN	Knife	1 49/64"	5/64"	00000000	00000
WX1010, WX1011, WX1012, WX2020, WX2021	MX	Chisel	1 1/2"	1/8"	00000000	00000
Weller XNT Series
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	1LX	Round	1 43/64"	1/64"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	1SCNW	Chisel	1 1/16"	1/64"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	1X	Round	1 7/64"	1/64"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	AS	Conical	1 13/64"	1/16"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	AX	Chisel	1 7/64"	1/16"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	BX	Chisel	1 7/16"	3/32"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	CS	Round	1 15/32"	1/8"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	HX	30° Chisel	1 7/16"	1/32"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	L	Chisel	1 15/32"	1/8"	00000000	00000
WT1013, WT1010, WT1011, WX1010, WX1011, WX1012, WX2020, WX2021	S	Conical	1 15/32"	1/64"	00000000	00000

Adjustable-Temperature Soldering Stations with Fixed-Temperature Tip

These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature. One tip is included; additional tips are sold separately.

Stations

Voltage	Wattage	Tip Shape	Min. Tip Temp., °F	Max. Tip Temp., °F	Point Wd.	Tip Connection Type	Duty Cycle	Approximate Heat-Up Time	Cord Lg., ft.	Plug Type	Specifications Met	Includes		Each
120V AC	60W	Chisel	600°	800°	1/16"	Plug	Continuous	20 sec.	5	Three Prong	TUV SUD Certified, C-TUV SUD Certified	700°F Fixed-Temp. Tip Stand One Sponge 60-watt Iron	0000000	0000000

Replacement Irons

Voltage	Wattage	Duty Cycle	Approximate Heat-Up Time		Each
120V AC	60W	Continuous	20 sec.	0000000	0000000

Replacement Heating Elements

		Each
	0000000	000000

Tips

Chisel

Conical

Tip Shape	Point Width	Connection Type	Choose a Max. Tip Temp., °F		Each
Chisel	3/64"	Plug	600°, 700°, 800°	0000000	000000
Chisel	1/16"	Plug	600°, 700°, 800°	0000000	00000
Chisel	1/8"	Plug	600°, 700°, 800°	0000000	00000
Chisel	3/16"	Plug	600°, 700°, 800°	0000000	00000
Conical	1/32"	Plug	600°, 700°, 800°	0000000	00000

Resistance-Soldering Stations

A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts. The handpiece has a two-wire cord that connects directly to the power unit with screw terminal connections for high- and low-watt output.

Stations
	Handpiece											Replacement Handpiece		Replacement Carbon Electrodes
Wattage	Jaw Opening	Lg.	Cord Lg., ft.	Duty Cycle	Approximate Heat-Up Time	Voltage	Cord Lg., ft.	Plug Type	Includes		Each		Each		Pair
75W/200W	3/8"	7 1/4"	4	Intermittent	Instant	115V AC	4	Three Prong	Carbon Electrodes	000000	0000000	000000	0000000	000000	000000

Spring Clamp Workholders

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly. The workholder’s arms are mounted to a base and adjust for positioning work at almost any angle.

One Spring Clamp and Rectangular Base

One Spring Clamp

			Jaw				Base		Handle
Clamp Lg.	Opening	Reach	Wd.	Type	Texture	Arm Lg.	Lg.	Wd.	Style	Material	Grip Style		Each
Steel Body and Jaws
3 1/2"	0" to 3/8"	3/4"	1/8"	Fixed	Smooth	8"	3"	3"	Pliers	Steel	Plain	0000000	000000

One Tweezer Clamp and Round Base

One Tweezer Clamp

			Jaw
Clamp Lg.	Opening	Reach	Wd.	Type	Texture	Arm Lg.	Base Dia.	Grip Style		Each
410 Stainless Steel Body and Jaws
6 1/2"	0" to 3/4"	3"	3/8"	Fixed	Serrated	2"	3"	Plain	000000	000000

Two Spring Clamps and Rectangular Base

Two Spring Clamps

			Jaw			Arm		Base		Handle
Clamp Lg.	Opening	Reach	Wd.	Type	Texture	Lg.	Mounting Rail Lg.	Lg.	Wd.	Style	Material	Grip Style		Each
Steel Body and Jaws
5/8"	0" to 1/2"	1/2"	3/16"	Adjustable	Serrated	1 1/2"	4"	2"	2"	Pliers	Steel	Plain	0000000	000000
3 1/2"	0" to 3/4"	1 1/4"	1/8"	Fixed	Smooth	6 1/2"	__	8 1/2"	6 1/4"	Pliers	Steel	Plain	0000000	000000

Two Spring Clamps with Adjustable Arms, Illumination and Magnification and Round Base

Two Spring Clamps
with Adjustable Arms,
Illumination and Magnification

			Jaw									Handle
Clamp Lg.	Opening	Reach	Wd.	Type	Texture	Arm Lg.	Magnification	Lens Dia.	Working Distance	Bulb Included	Base Dia.	Style	Material		Each
Plastic Body and Steel Jaws
1 1/2"	0" to 1/2"	1/2"	3/16"	Fixed	Serrated	6"	2.0X	4 1/4"	2"-8"	Yes	6"	Pliers	Steel	0000000	000000

Two Spring Clamps with Illumination and Magnification and Rectangular Base

Two Spring Clamps with Illumination and Magnification

										Base				Handle
Clamp Lg.	Opening	Reach	Jaw Wd.	Arm Lg.	Magnification	Spot Lens Magnification	Lens Dia.	Working Distance	Bulb Included	Lg.	Wd.	Overall Lg.	Holding Capacity, lbs.	Style	Material	Electrical Connection Type		Each
Plastic Body and Steel Jaws
3"	0" to 7/16"	1/2"	3/16"	4 1/2"	1.75X	4.5X	3 3/4"	4"	Yes	6 7/8"	7 1/16"	18"	0.22	Pliers	Steel	Plug In	0000000	0000000

Four Spring Clamps with Adjustable Arms and Rectangular Base

Four Spring Clamps with Adjustable Arms

8 1/2" Arm Lg. Clamps				12 1/2" Arm Lg. Clamps				Jaw		Base		Handle
Clamp Lg.	Opening	Reach	Jaw Wd.	Clamp Lg.	Opening	Reach	Jaw Wd.	Type	Texture	Lg.	Wd.	Style	Material	Grip Style		Each
Steel Body and Jaws
7/8"	0" to 7/16"	5/8"	1/8"	7/8"	0" to 5/16"	5/8"	3/16"	Fixed	Serrated	9"	6"	Pliers	Steel	Plain	0000000	000000