Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.

The flux leaves minimal residue so there's no need for cleanup.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

This solder is commonly used in solder melting pots

The high melting point prevents remelting when soldering successive joints with another solder.

Use this solder for general purpose applications.

This solder is commonly used in solder melting pots.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

The flux leaves minimal residue so there's no cleanup.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Composed of pure tin, this solder is safe for use with food service equipment.

This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.

Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.

This flux has less cleaning action, but leaves the least amount of residue.

The flux residue easily washes away with water.

This flux is the fastest to remove from plumbing pipelines.

A special formulation of Nokorode soldering flux, this flux remains thick at temperatures up to 115° F and protects your solder joint from corrosion.

This flux causes solder to flow in a thin film to create joints using minimal solder.

Use these brazing alloys with a variety of metals.

Create stronger bonds than standard brazing alloys.

Don't worry about adding flux when brazing corrosion resistant metals such as 300-series stainless steel—these alloys have it built in.

Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.

Join metal in inert atmospheres or vacuum conditions, such as furnace brazing.

Join aluminum to copper and copper-based alloys, such as brass and bronze.

Everything you need to start brazing most metals in general purpose applications.

These BCuP-5 alloys create stronger bonds than standard brazing alloys for copper.

Melting into a thick liquid, these BCuP-3 alloys fill in larger gaps than standard brazing alloys for copper.