The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

With more than double the clearance of standard sockets, these sockets access nuts on extra-long bolts.

Pivot the head to access fasteners from an angle.

Hold fasteners securely in place as you drive them.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Grip the indentations around the outside of tri-groove fasteners.

Tighten and loosen fasteners with an external Torx drive.

The short bit on these sockets fits in spaces where height clearance is limited.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

Extra-long bits allow access to hard-to-reach fasteners.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

These sockets are also known as Robertson bits.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

A rubber insert grips the plug to prevent damage.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Access 6-point nuts and bolts in tight and awkward spaces—the heads on these sockets pivot.

Two spring-loaded balls inside these sockets firmly hold nuts and bolts in place as you turn them, including nonmagnetic fasteners like stainless steel screws.

Suitable for occasional maintenance work, these sets are imported.

These sets organize what you need when working around live electrical circuits.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

With twice as many corners, 8-point sockets grab onto square-drive screws and nuts more quickly than 4-point sockets.

Extra-long bits allow access to hard-to-reach fasteners.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

Pivot the head to access fasteners from an angle.

These sockets are also known as pin-in-Torx bits.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Set a desired torque within the range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.