Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra length allows access to fasteners on long bolts.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Pivot the head to access fasteners from an angle.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Grip the indentations around the outside of tri-groove fasteners.

Quickly position these sockets on square and external 8-point fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as Robertson bits.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Tighten or loosen nuts and bolts without damaging the finish.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

Use bit sockets as an alternative to a screwdriver or L-key.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

Extra-long bits allow access to hard-to-reach fasteners.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

These sockets are also known as pin-in-Torx bits.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Pivot the head to access fasteners from an angle.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Convert from one square drive size to another.

Extend the shaft for additional length.

The L shape provides clearance when reaching over obstructions.

The ratcheting mechanism turns sockets quickly.

No need to pull the socket off the tool—push a button to release.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

The shaft on these wrenches extends and locks.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Pivot the head to access fasteners in tight spots.

No need to pull the socket off the tool—push a button to release.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

These wrenches have an accuracy of ±2.0%.

Anchor these multipliers for added stability.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

These tools are suitable for general shop, maintenance, and automotive work.

Use these wrenches for medium-volume production, general maintenance, and construction applications.

Reach a variety of spots with the confidence that your extension won’t disengage.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Safely extend your reach in areas where you could accidentally come into contact with live circuits.

Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

Convert from one square drive size to another.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Adapters are set to a specific torque and cannot be adjusted.

Turn sockets with a bit screwdriver.

Pivot the head to access fasteners from an angle.

Change a standard wrench handle into a ratcheting wrench.