Safely extend your reach in areas where you could accidentally come into contact with live circuits.

Reach a variety of spots with the confidence that your extension won’t disengage.

Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.

Lock your socket into these extensions to prevent accidental disengagement.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.

Push the square drive through the adapter to change size.

Convert your socket into a flex socket to access fasteners from an angle.

Convert your socket into a flex socket without worrying about the adapter falling off.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Fit these adapters between a wrench and socket to enable finger tightening.

Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.

Lock your socket into the extension to prevent accidental disengagement.

Reach a variety of spots by keeping common extension lengths on hand.

Convert from one square drive size to another.

Convert your impact socket into a flex socket to access fasteners from an angle.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

Convert from one square drive size to another.

Extra-long bits help you access hard-to-reach fasteners.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

The hole in the middle of these bits fits the security pin in tamper-resistant Torx screws.

Extra-long bits allow access to hard-to-reach fasteners.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Extra-long bits allow access to hard-to-reach fasteners.

Pivot the head to access fasteners from an angle.

These sockets are also known as pin-in-Torx bits.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

Extra-long bits help you access hard-to-reach fasteners.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

The short bit on these sockets fits in spaces where height clearance is limited.

Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Keep personnel safe from electric shock with ground fault protection.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.