Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Bend these socket extensions around obstructions to turn hard-to-reach fasteners.

Turn sockets with a bit screwdriver.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Convert your socket into a flex socket to access fasteners from an angle.

Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Set a desired torque within the range.

Change a standard wrench handle into a ratcheting wrench.

Extra-long bits allow access to hard-to-reach fasteners.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Extra-long bits allow access to hard-to-reach fasteners.

Pivot the head to access fasteners from an angle.

These sockets are also known as pin-in-Torx bits.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Suitable for occasional maintenance work, these sets are imported.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.