Extend your socket's reach.

Safely extend your reach in areas where you could accidentally come into contact with live circuits.

Reach a variety of spots with the confidence that your extension won’t disengage.

Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.

Lock your socket into these extensions to prevent accidental disengagement.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Convert your socket into a flex socket to access fasteners from an angle.

Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Set a desired torque within the range.

Change a standard wrench handle into a ratcheting wrench.

Attach to your socket for a longer reach.

Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.

Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.

A magnet holds the socket, making changes quicker.

Pull the collar to quickly attach and remove sockets.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Convert your impact socket into a flex socket to access fasteners from an angle.

First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Pivot the head of the sockets in these sets to access fasteners from an angle.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Suitable for occasional maintenance work, these sets are imported.

These sets organize what you need when working around live electrical circuits.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

The Torx bit sockets in these sets fasten Torx screws often used in vehicles, bicycles, and electronics.

Extra-long bits allow access to hard-to-reach fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as Robertson bits.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

These sockets are also known as pin-in-hex or pin-in-socket bits.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

A filter through the middle isolates two pairs of outlets, so high voltage equipment plugged into one pair won’t affect the other pair.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

With a rubber housing, these outlet strips withstand drops and other impact.

Connect multiple devices from a single outlet.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Put overhead outlets in arm’s reach.

Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Designed for indoor use, these cords are often used to power appliances.

After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.

Charge up to eight batteries at once.

Keep Bosch tool batteries powered with these chargers.

Recharge batteries for Makita tools.