Keep out dirt and moisture—the sealed housing on these switches is watertight and meet MIL-PRF-8805. They’re sized to fit in the tiniest of spaces. To minimize arcing and prevent contacts from sticking, they open and close circuits quickly. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

Switches with a plunger actuator require a push to actuate.

Switches with a roller lever actuator allow parts to glide across the actuation surface with less friction than standard levers.

For technical drawings and 3-D models, click on a part number.

Smaller than standard size snap-acting switches, these fit in tight spaces. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as an internal component in limit, pressure, and temperature switches.

For technical drawings and 3-D models, click on a part number.

At least 25% smaller than our Miniature Snap-Acting Switches, these switches are often used to trigger actions from inside a vehicle’s door or an engine compartment. They open and close circuits faster than other switches, preventing contacts from sticking by reducing the time that they're near one another. They also minimize the chance of arcing, so electricity won’t jump across contacts.

Plunger actuator switches send a signal when the actuator is pushed directly downward. They have the smallest actuator of the actuators here, reducing the risk of accidental switching.

Lever actuator switches have a larger surface area than plunger actuator switches and can be pushed down by front-to-back movement, so they require less precision to activate.

Roller lever actuator switches allow parts to glide across the actuation surface with less friction than standard levers. This prevents wear and tear over time.

For technical drawings and 3-D models, click on a part number.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion. They open and close circuits quickly to minimize arcing and prevent contacts from sticking. They’re often used as door-open indicators on appliances and enclosures or as internal components in limit, pressure, and temperature switches.

Switches with a plunger actuator require a push to actuate.

Switches with a lever actuator have an arm that increases the size of the actuation surface.

Switches with a roller lever actuator allow parts to glide across the actuation surface with less friction than standard levers. This prevents wear and tear over time.

For technical drawings and 3-D models, click on a part number.

Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice. They send a signal to your circuit when an object hits the actuator—for instance, a box on a conveyor runs into the switch, stopping the conveyor. They open and close circuits as fast as snap-acting switches, but they have a bigger actuator for large objects. To actuate, they require a push, similar to a button. Rated IP68, they’re protected against dust and temporary submersion.

Switches with a stainless steel housing stand up better to wear and tear and corrosion better than switches with a zinc-plated steel housing.