Use these end mills for general purpose keyseat cutting in a wide range of material, including aluminum, iron, and steel. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

With better heat and wear resistance than high-speed steel, these cobalt steel keyseat cutters can run at higher speeds and provide better performance on hard material. They mill precise notches in rotary shafts to fit machine keys and can also be used for slot milling.

Use these versatile end mills for milling in most material, including aluminum, brass, bronze, iron, and steel. They're often used to create slots in machine tool tables, indexing tables, and other workholding surfaces.

Create dovetail grooves that allow O-rings to flex without falling out of place.

With better heat and wear resistance than high-speed steel, these cobalt steel dovetail cutters run at higher speeds and provide better performance on hard material. Use them to create dovetail slots for connecting two components with a sliding fit.

With a mill diameter less than 1/8" or 3 mm, these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Intersecting flutes create a fine finish, making these end mills good for operations requiring light stock removal, such as deburring, profiling, and finishing.

Get longer life when milling hard material with these end mills—their 10° corner chamfer has a stronger cutting edge compared to standard square end mills.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

These end mills have a neck that’s extended and has a reduced diameter—this prevents them from rubbing against your workpiece when deep milling.

Variable spacing between the flutes reduces vibration for faster cuts, a smoother finish, and longer tool life.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They are uncoated for use in soft material, such as aluminum, brass, and bronze.

With a wear-resistant coating and high helix angle, these end mills provide excellent shearing and chip removal in stainless steel and titanium.

A titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Often used for slotting and pocketing cuts in mold and die making, these end mills have a 90° profile and rounded corners, which reduce flute breakage and chipping.

With a mill diameter of 3 mm or less, these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing.

These end mills have either a neck or shank that’s extended and has a reduced diameter—this prevents them from rubbing against your workpiece when deep milling. Variable spacing between the flutes reduces vibration, allowing the end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

Replicate the shape of complex parts with these end mills.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life. They have a high helix angle and a wear-resistant coating for excellent shearing and chip removal in stainless steel and titanium.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. When one end wears out, turn the tool around for a sharp edge.

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel.

These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite.

The 45° helix angle plus a titanium-carbonitride (TiCN) coating prevents soft material, such as aluminum, brass, and bronze, from accumulating on the cutting edge and creating an uneven finish.

Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel.

With a mill diameter less than 1/8", these end mills are great for precise, detailed work such as in electronics, mold making, and medical-device manufacturing.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

These end mills have an extended neck with a reduced diameter that prevents them from rubbing against your workpiece when deep milling. Also known as runner cutters, they cut channels with precise angles and dimensions, reducing the need for additional finishing.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than cobalt steel for the longest life and best finish on hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron and steel.

These tools have a tapered profile and rounded cutting edge for making smooth contours on intricate, three-dimensional shapes. They're also known as taper degree end mills. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

A titanium-diboride (TiB2) coating reduces friction when working with nonferrous metals, so you can use these end mills to cut soft metals like aluminum, brass, and bronze. Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life.

Use these versatile end mills for milling in most material, including aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts.

Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials.

These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel.

With peripheral and side teeth, these saws remove chips for a consistent cutting width.