Remove accumulated water from sump pits, loading docks, and cooling towers. The float switch is wired to the pump. Use with debris-free water. Submerge while in use and do not run dry.

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Use this pump to remove accumulated water from sump pits, loading docks, and cooling towers. It has a cast iron housing that stands up to demanding environments. Use with debris-free water. Submerge while in use and do not run dry.

Since the switch activates on increasing pressure caused by rising water levels, these pumps have no external moving parts to catch on sump pit walls. Use them to remove accumulated water from sump pits, loading docks, and cooling towers. With cast iron housing, these pumps can stand up to demanding environments. They should be used with debris-free water. Submerge while in use and do not run dry.

Switch maintenance kits (sold separately) include a bracket, a diaphragm O-ring, a screw, and a switch.

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Pumps remove accumulated water from sump pits, loading docks, and cooling towers. They have a cast iron housing that stands up to demanding environments. Use with debris-free water. Submerge while in use and do not run dry.

The intake is 2” from the base of the pump to prevent dirt at the bottom of your sump pit from clogging the pump. The float switch is wired to the pump. Use with debris-free water. Submerge while in use and do not run dry.

Convenient for applications where a sump pit is impractical, these pumps include a basin with a vent on top. They handle raw sewage water with solids up to 2" in diameter. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump.

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as grinder pumps, they have stainless steel blades that prevent clogs by breaking down sewage into an easy-to-transfer slurry. Do not use with metal particles or debris that could damage blades. Pumps have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Equipped with a large intake and a rugged impeller, this pump transfers raw sewage water with solids up to 2" in diameter. It has a cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Submerge while in use and do not run dry.

Convenient for applications where a sump pit is impractical, this pump includes a basin with a vent on top. It has a float switch with a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as an effluent pump, it accommodates solids up to 3/4" in diameter. It is often used with liquid waste that has passed through a septic tank, so most solids are removed.

Use these pumps to move higher volumes of water with solids than other sump pumps. They activate when plugged in; add a plug-in switch to control when the pump activates. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They are often used with liquid waste that has passed through a septic tank, so most solids are removed. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Also known as effluent pumps, these accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. They have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Also known as effluent pumps, these accommodate solids up to 3/4” in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. The float switch is wired to the pump. All have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as effluent pumps, these accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. All have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Use these pumps at temperatures up to 200° F. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. The float switch is adjustable and wired to the discharge pipe. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Replacement float switches (sold separately) include a float, connecting wires, and a seal.