A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

Mount these bearings onto a hex shaft.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

The flange ensures proper positioning inside a tube or housing.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

Also known as mild steel, low-carbon steel balls are our easiest steel balls to machine. They are often used for parts that don’t require high strength, such as knobs.

Lighter in weight than steel and stronger than plastic, these aluminum balls are widely used as bearings and in valves.

This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.

These ball transfers have capacities up to 3,300 lbs.

The flange has mounting holes for fastening.

A thick rubber cushion underneath these ball transfers absorbs impact and reduces vibration.

Install these ball transfers in a threaded hole or use a nut to secure.

Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.

Transfers recess into the mounting surface for a low profile.

With a ball recessed into the mounting surface, these ball transfers have a low profile. Their double-sealed ball keeps out dirt and debris, and side vents expel contaminants.

These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.