About Tapping Screws
More
Tamper-Resistant Torx Rounded Head Screws for Sheet Metal
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel  | ||||||||
No. 4 | ||||||||
| 3/8" | 0.206" | 0.055" | T8 | 3/32" | 24 | 25 | 000000000 | 000000 |
| 1/2" | 0.206" | 0.055" | T8 | 3/32" | 24 | 25 | 000000000 | 00000 |
| 5/8" | 0.206" | 0.055" | T8 | 3/32" | 24 | 25 | 000000000 | 00000 |
| 3/4" | 0.206" | 0.055" | T8 | 3/32" | 24 | 25 | 000000000 | 00000 |
No. 6 | ||||||||
| 3/8" | 0.255" | 0.07" | T10 | 7/64" | 20 | 25 | 000000000 | 00000 |
| 1/2" | 0.262" | 0.073" | T10 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 5/8" | 0.255" | 0.07" | T10 | 7/64" | 20 | 25 | 000000000 | 00000 |
| 3/4" | 0.262" | 0.073" | T10 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1" | 0.262" | 0.073" | T10 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.255" | 0.07" | T10 | 7/64" | 20 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.262" | 0.073" | T10 | No. 32 | 18 | 25 | 000000000 | 00000 |
No. 8 | ||||||||
| 3/8" | 0.307" | 0.085" | T15 | 1/8" | 18 | 25 | 000000000 | 00000 |
| 1/2" | 0.312" | 0.087" | T15 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 5/8" | 0.307" | 0.085" | T15 | 1/8" | 18 | 25 | 000000000 | 00000 |
| 3/4" | 0.312" | 0.087" | T15 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1" | 0.312" | 0.087" | T15 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.312" | 0.087" | T15 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.312" | 0.087" | T15 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 2" | 0.307" | 0.085" | T15 | 1/8" | 18 | 25 | 000000000 | 00000 |
No. 10 | ||||||||
| 1/2" | 0.361" | 0.101" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 5/8" | 0.355" | 0.1" | T25 | 9/64" | 16 | 25 | 000000000 | 00000 |
| 3/4" | 0.361" | 0.101" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1" | 0.361" | 0.101" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.361" | 0.101" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.361" | 0.101" | T25 | No. 21 | 12 | 10 | 000000000 | 00000 |
| 2" | 0.355" | 0.1" | T25 | 9/64" | 16 | 10 | 000000000 | 00000 |
No. 12 | ||||||||
| 3/4" | 0.41" | 0.11" | T25 | 5/32" | 14 | 10 | 000000000 | 0000 |
| 1" | 0.41" | 0.11" | T25 | 5/32" | 14 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.41" | 0.11" | T25 | 5/32" | 14 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.41" | 0.11" | T25 | 5/32" | 14 | 10 | 000000000 | 00000 |
No. 14 | ||||||||
| 1/2" | 0.437" | 0.132" | T27 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 3/4" | 0.437" | 0.132" | T27 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 1" | 0.437" | 0.132" | T27 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.437" | 0.132" | T27 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 2" | 0.43" | 0.13" | T27 | 3/16" | 14 | 10 | 000000000 | 00000 |
Tamper-Resistant Torx Flat Head Screws for Sheet Metal
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess. They're beveled under the head for a flush finish in countersunk holes. Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
No. 6 | ||||||||
| 1/2" | 0.257" | 0.097" | T15 | No. 32 | 18 | 25 | 000000000 | 000000 |
| 5/8" | 0.277" | 0.097" | T15 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 3/4" | 0.257" | 0.097" | T15 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1" | 0.257" | 0.097" | T15 | No. 32 | 18 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.277" | 0.097" | T15 | No. 32 | 18 | 25 | 000000000 | 00000 |
No. 8 | ||||||||
| 1/2" | 0.307" | 0.112" | T20 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 5/8" | 0.327" | 0.112" | T20 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 3/4" | 0.307" | 0.112" | T20 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1" | 0.307" | 0.112" | T20 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.307" | 0.112" | T20 | No. 29 | 15 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.327" | 0.112" | T20 | No. 29 | 15 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.327" | 0.112" | T20 | No. 29 | 15 | 10 | 000000000 | 0000 |
| 2" | 0.327" | 0.112" | T20 | No. 29 | 15 | 10 | 000000000 | 0000 |
No. 10 | ||||||||
| 1/2" | 0.357" | 0.127" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 3/4" | 0.357" | 0.127" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1" | 0.357" | 0.127" | T25 | No. 21 | 12 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.378" | 0.127" | T25 | No. 21 | 12 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.357" | 0.127" | T25 | No. 21 | 12 | 10 | 000000000 | 0000 |
No. 14 | ||||||||
| 5/8" | 0.531" | 0.161" | T30 | No. 4 | 14 | 10 | 000000000 | 0000 |
| 3/4" | 0.531" | 0.161" | T30 | No. 4 | 14 | 10 | 000000000 | 00000 |
| 1" | 0.531" | 0.161" | T30 | No. 4 | 14 | 10 | 000000000 | 00000 |
| 1 1/4" | 0.531" | 0.161" | T30 | No. 4 | 14 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.531" | 0.161" | T30 | No. 4 | 14 | 10 | 000000000 | 00000 |
1/4" | ||||||||
| 3/4" | 0.472" | 0.161" | T30 | 5.5 mm | 10 | 10 | 000000000 | 0000 |
| 1" | 0.472" | 0.161" | T30 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 1 1/4" | 0.472" | 0.161" | T30 | 5.5 mm | 10 | 10 | 000000000 | 00000 |
Tamper-Resistant Rounded Head Drilling Screws for Metal
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess. They save you time and effort by drilling their own holes and fastening in a single operation. Made from 410 stainless steel, they're strong, wear resistant, and mildly chemical resistant. Not for use with aluminum. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Drill Tip | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Type | Lg. | Max. Drilling Thick. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | For Use In | Pkg. Qty. | Pkg. | |
410 Stainless Steel | |||||||||||
No. 8 | |||||||||||
| 1/2" | No. 2 | 3/16" | 0.098" | 0.322" | 0.115" | T20 | 18 | Steel, Stainless Steel, Sheet Metal | 25 | 000000000 | 000000 |
| 3/4" | No. 2 | 3/16" | 0.098" | 0.322" | 0.115" | T20 | 18 | Steel, Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1" | No. 2 | 3/16" | 0.098" | 0.322" | 0.115" | T20 | 18 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 3/16" | 0.098" | 0.322" | 0.115" | T20 | 18 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 3/16" | 0.098" | 0.322" | 0.115" | T20 | 18 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
No. 10 | |||||||||||
| 1/2" | No. 2 | 13/64" | 0.106" | 0.373" | 0.133" | T25 | 16 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 3/4" | No. 2 | 13/64" | 0.106" | 0.373" | 0.133" | T25 | 16 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1" | No. 2 | 13/64" | 0.106" | 0.373" | 0.133" | T25 | 16 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 13/64" | 0.106" | 0.373" | 0.133" | T25 | 16 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 13/64" | 0.106" | 0.373" | 0.133" | T25 | 16 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
No. 12 | |||||||||||
| 1" | No. 3 | 9/32" | 0.187" | 0.425" | 0.156" | T27 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 9/32" | 0.187" | 0.425" | 0.156" | T27 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2" | No. 3 | 9/32" | 0.187" | 0.425" | 0.156" | T27 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
No. 14 | |||||||||||
| 1" | No. 3 | 11/32" | 0.21" | 0.492" | 0.175" | T30 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 11/32" | 0.21" | 0.492" | 0.175" | T30 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2" | No. 3 | 11/32" | 0.21" | 0.492" | 0.175" | T30 | 14 | Steel, Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
Tamper-Resistant Flat Head Drilling Screws for Metal
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess. All are beveled under the head for use in countersunk holes. They save you time and effort by drilling their own holes and fastening in a single operation. Made from steel, they have a zinc plating to resist corrosion in wet environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Drill Tip | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Type | Lg. | Max. Drilling Thick. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
No. 8 | |||||||||||
| 1/2" | No. 2 | 3/16" | 0.098" | 0.312" | 0.1" | T15 | 18 | Steel, Sheet Metal | 50 | 000000000 | 000000 |
| 3/4" | No. 2 | 3/16" | 0.098" | 0.312" | 0.1" | T15 | 18 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 2 | 3/16" | 0.098" | 0.312" | 0.1" | T15 | 18 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/4" | No. 2 | 3/16" | 0.098" | 0.312" | 0.1" | T15 | 18 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 2 | 3/16" | 0.098" | 0.312" | 0.1" | T15 | 18 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
No. 10 | |||||||||||
| 1/2" | No. 2 | 3/16" | 0.098" | 0.362" | 0.081" | T20 | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 3/4" | No. 3 | 1/4" | 0.15" | 0.362" | 0.116" | T20 | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 3 | 1/4" | 0.15" | 0.362" | 0.116" | T20 | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 1/4" | 0.15" | 0.362" | 0.116" | T20 | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 2" | No. 3 | 1/4" | 0.15" | 0.362" | 0.116" | T20 | 16 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
No. 14 | |||||||||||
| 1" | No. 3 | 11/32" | 0.21" | 0.477" | 0.153" | T27 | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 11/32" | 0.21" | 0.477" | 0.153" | T27 | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2" | No. 3 | 11/32" | 0.21" | 0.477" | 0.153" | T27 | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |