The jaws have V-notches in 1/4" increments to measure the depth of bends.

These tools lock onto your material to prevent them from opening while bending and crimping.

These tools have five blades and compound-leverage action for more power with less effort than other crimpers.

Create a raised edge in sheet metal that locks into the rolled edge of another piece.

Reinforced construction lets these benders handle thicker material than bench-top benders.

Make deep folds in roofing panels and other large pieces of sheet metal.

Make bends up to 135° in metal sheets. Benders have a clearance of 4" for insertion and removal of large workpieces such as vehicle panels and duct work.

Pull and pinch metal extrusions, such as L-channels, so they fit precisely around contoured edges and frames.

Also known as slip rolls, these curvers create bends, curves, and circles in sheet metal.

Create long, uniform folds on the edges of sheet metal.

Bend wire and rod up to 3/8" diameter and flat stock up to 1/2"×3/16".

Also known as ring rollers, these curvers shape wire, rods, and flat stock into curves and circles.

To suit a range of applications, these sets include hammers in a range of sizes and weights. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

Also known as jeweler's hammers, these have smooth steel faces for precise forming and finishing work on delicate metal workpieces.

Place on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.