We will reply to your message within an hour.
These short sockets fit spaces where height clearance is limited.
The short bit on these sockets fits in spaces where height clearance is limited.
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
Achieve the best possible grip on hex fasteners and prevent rounding.
Convert from one square drive size to another.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Fit these adapters between your wrench and socket to enable finger tightening.
Pivot the head to access fasteners from an angle.
Change a standard wrench handle into a ratcheting wrench.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Turn sockets with a bit screwdriver.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
A magnet holds the socket, making changes quicker.
Pull the collar to quickly attach and remove sockets.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
Store sockets on posts marked with the size.
Slip these magnetic inserts into your sockets to keep fasteners from falling out.
Turn lug bolts on car and truck wheels. These wrenches have a different socket size at each end.
Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.
Pivot the socket end to access hard-to-reach fasteners.
These wrenches have one pivoting socket end and one open end.
Instead of carrying around a large drum plug wrench, keep these sockets in your toolbox and turn with a ratchet wrench.
Made of spark-inhibiting materials, these wrenches are also corrosion resistant.
Also known as bung wrenches, these tools are used to install and remove screw-in drum plugs.
When the set torque is reached, these wrenches slip to disengage and stop overtightening.
Quickly install threaded rods and studs using a cordless drill, instead of doing it by hand.
Also known as a can socket wrench, this tool opens telephone box fasteners and tightens nuts on binding posts.