About Shafts
More
About Tool Steel
More
Rotary Shafts
Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are turned, precision ground, and polished to meet tight diameter and straightness tolerances. This means these shafts evenly distribute loads, reduce vibration, and improve accuracy and stability.
Steel shafts are generally stronger than stainless steel shafts but not as corrosion resistant. Carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use.
Shafts with chamfered edges reduce damage to bearings, housings, and other components during installation.
For technical drawings and 3-D models, click on a part number.
| Lg. | Lg. Tolerance | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Metric—1045 Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
17mm Dia. (Tolerance: -0.051mm to 0mm) | |||||||
| 200mm | -1.57mm to 1.57mm | 0.3 mm per 300 mm | Chamfered | Medium | Brinell 197 | 0000000 | 000000 |
| 400mm | -1.57mm to 1.57mm | 0.3 mm per 300 mm | Chamfered | Medium | Brinell 197 | 0000000 | 00000 |
| 1,000mm | -1.57mm to 1.57mm | 0.3 mm per 300 mm | Chamfered | Medium | Brinell 197 | 0000000 | 00000 |
| 2,000mm | -1.57mm to 1.57mm | 0.3 mm per 300 mm | Chamfered | Medium | Brinell 197 | 0000000 | 00000 |
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Easy-to-Machine 303 Stainless Steel
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 25,000 psi
- Hardness:
Inch Sizes: Rockwell B77 (Medium)
Metric Sizes: Rockwell B85 (Medium) - Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A582
Metric Sizes: EN 10088-3
Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment:
Inch sizes: Rockwell C65
Metric sizes: Rockwell C62 - Specifications Met: ASTM A681
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
3 ft. Lg. | |||
|---|---|---|---|
| Dia. | Dia. Tolerance | Mechanical Finish | |
| 17mm | -0.025mm to 0.025mm | Precision Ground | 00000000 |
Tight-Tolerance Multipurpose Air-Hardening A2 Tool Steel Rods
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe. They’re also known as drill rod. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 55,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C62
- Specifications Met: ASTM A681