Determine if aluminum is the right material for you and which alloys will work best.
About Plastic
More
Multipurpose 6061 Aluminum Rods and Discs
- Yield Strength: 35,000 psi
- Hardness:
Foot and inch sizes: Brinell 95 (Soft)
Metric sizes: Brinell 80 (Soft) - Temper: See table
- Fabrication: See table
- Specifications Met:
Cold Worked: ASTM B211
Extruded: ASTM B221
Cold Rolled: ASTM B209
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1/2 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | |
| 16" | -0.104" to 0.104" | Extruded | T6 | Hardened | -320° to 300° | 00000000 |
Easy-to-Machine MIC6 Cast Aluminum Discs
- Yield Strength: 15,000 psi
- Hardness: Brinell 65 (Soft)
- Temper: Not Rated
- Fabrication: Cast
MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining. Use these discs for CNC routing tables, assembly jigs, vacuum chucks, and other applications where consistent flatness and tight tolerances are critical.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
MDS-Filled Easy-to-Machine Wear-Resistant Cast Nylon Rods and Discs
- Color: Black
- Max. Temperature: 230° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
An MDS additive provides exceptional wear resistance as well as a self-lubricating surface. Made of cast nylon 6, they’re easier to machine than other MDS-filled nylon rods and discs, plus they are better electrical insulators. Use them to fabricate gears, sprockets, wear strips, and other high-friction parts. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.
Easy-to-Machine Wear-Resistant Cast Nylon Rods and Discs
- Color: Off-White
- Temperature Range: -20° to 200° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R115 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D5989, FDA Compliant 21 CFR 177.1500, UL 94 HB
Because these cast nylon 6 rods and discs are easier to machine than standard nylon 6/6, they’re often made into pulleys, screws, bushings, and bearings. They’re also better electrical insulators. They have a wear-resistant, slippery surface that reduces friction. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.