About Set Screws
More
Metric Alloy Steel Cup-Point Set Screws
These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Drive Size, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Alloy Steel | ||||||
|---|---|---|---|---|---|---|
M24 × 3 mm | ||||||
| 25 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 30 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 0000 |
| 35 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 40 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 50 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 60 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 80 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 90 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 110 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
| 120 | 12 | Rockwell C45 | DIN 916, ISO 4029 | 1 | 000000000 | 00000 |
Metric Alloy Steel Flat-Tip Set Screws
These set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Drive Size, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Alloy Steel | ||||||
|---|---|---|---|---|---|---|
M24 × 3 mm | ||||||
| 25 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 00000 |
| 30 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 0000 |
| 40 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 00000 |
| 50 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 00000 |
| 60 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 0000 |
| 80 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 0000 |
| 100 | 12 | Rockwell C45 | DIN 913, ISO 4026 | 1 | 000000000 | 00000 |
Metric Alloy Steel Extended-Tip Set Screws
Also known as dog-point set screws, these set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Tip, mm | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia. | Lg. | Drive Size | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Alloy Steel | ||||||||
M24 × 3 mm | ||||||||
| 25 | 18 | 6.3 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 00000 |
| 35 | 18 | 12.43 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 0000 |
| 40 | 18 | 12.43 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 0000 |
| 60 | 18 | 12.43 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 0000 |
| 70 | 18 | 12.43 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 00000 |
| 80 | 18 | 12.43 | 12 | Rockwell C45 | DIN 915, ISO 4028 | 1 | 000000000 | 00000 |
Metric Alloy Steel Ball-Point Set Screws
These set screws have a rolling ball that swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Extra-Long Hex-Nose Spring Plungers
These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers. The extra-long nose provides a large bearing surface to handle side loads. Install from the nose end with a wrench for more torque than slotted long-nose spring plungers. They're made from wear-resistant steel. A nylon locking pellet adds friction to resist loosening.
Black-oxide steel bodies resist corrosion in dry environments.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Thread | Nose | Nose Force, lbs. | Thread Locker | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Body Lg., mm | Extended Lg., mm | Wd., mm | Extended | Compressed | Type | Temp. Range, °F | Each | |
Black-Oxide Steel Body and Steel Nose | ||||||||||
| M24 | 3 | 127 | 38.1 | 12.7 | 16 | 68 | Nylon Pellet | -50° to 180° | 00000000 | 000000 |