These metric set screws have good chemical resistance.

These metric 18-8 stainless steel set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Secure gears, pulleys, and other objects that require frequent adjustments, even in wet environments.

Also known as dog-point set screws, these metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. Made of 18-8 stainless steel, they have good chemical resistance.

Turn these metric screws by hand using the hex head, or tighten them with a wrench for extra torque. With an extended tip that locks into a mating hole or slot—sometimes known as a dog point—they are often used to align and secure parts such as gears and pulley wheels.

These metric set screws have a rolling ball that swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Install with a driver.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.