Screwdriver-Style Pry Bars
The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.
Pry bars 36" and longer have a cap on the end of the handle that lets you strike it without damage.
Bar | |||||||||
---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Shaft Lg. | Weight | Size | Shape | End Wd. | Material | Features | Each | |
Offset Wedge End | |||||||||
12" | 7" | 6 oz. | 3/8" | Flat | 5/8" | Black-Oxide Steel | __ | 00000000 | 000000 |
17" | 12" | 8 oz. | 3/8" | Flat | 5/8" | Black-Oxide Steel | __ | 00000000 | 00000 |
25" | 18" | 1 1/2 lbs. | 1/2" | Flat | 3/4" | Black-Oxide Steel | __ | 00000000 | 00000 |
31" | 24" | 2 lbs. | 1/2" | Flat | 3/4" | Black-Oxide Steel | __ | 00000000 | 00000 |
36" | 29" | 4 lbs. | 5/8" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 00000 |
42" | 35" | 5 1/2 lbs. | 5/8" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 00000 |
48" | 38" | 7 1/2 lbs. | 3/4" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 000000 |
Screwdriver-Style Pry Bar Sets
The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.
Bar | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Number of Pieces | End Style | Overall Lg. | Shaft Lg. | Weight | Size | Shape | End Wd. | Material | Each | |
3 | Offset Wedge | 12" 17" 25" | 7" 12" 18" | 6 oz. 8 oz. 1 1/2 lbs. | 3/8" 3/8" 1/2" | Flat Flat Flat | 5/8" 5/8" 3/4" | Black-Oxide Steel | 0000000 | 000000 |
Miniature Pry Bars
Lift and pry small objects, such as electronic and circuit board-mounted components. These tools have a static-dissipative handle that drains static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They are also known as chip lifters.
Bar | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Wt., oz. | Shaft Lg. | Size | Shape | End Wd. | Material | Handle Material | Surface Resistivity | Each | |
Offset Claw End | ||||||||||
5 3/4" | 1 | 2" | 1/8" | Flat | 1/8" | Chrome-Plated Steel | Plastic | 106-109 ohms-cm. | 0000000 | 000000 |
Pry Bars
Style K are good for separating die sets. Also known as die bars.
Pry bars with offset and gooseneck ends give you more leverage than straight ends.
Nonmarring Pry Bars
The gooseneck end of these pry bars is aluminum-bronze coated to prevent scratching. Often used to separate die blocks, they're also known as die bars.
Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads. Also known as claw bars.
Style A are also known as bear claws.
Style B are often used for stripping and removing wooden concrete forms after concrete has set.
Style F have a handle arch that allows more swing during pulling and prying without the need to use a block for leverage.
Style G are also known as crow bars.
Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
7 3/4" | 11 oz. | 3/8" | Flat | 5/8" × 5/8" | 2 | Painted Steel | 00000000 | 000000 |
10 1/2" | 14 oz. | 1/2" | Flat | 13/16" × 13/16" | 2 | Painted Steel | 00000000 | 00000 |
11 3/4" | 1 1/8 lbs. | 1/2" | Flat | 7/8" × 7/8" | 2 | Painted Steel | 00000000 | 00000 |
14 1/4" | 1 5/8 lbs. | 5/8" | Flat | 1" × 1" | 2 | Painted Steel | 00000000 | 00000 |
Chisel End | |
Claw End |
Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
18" | 1 3/8 lbs. | 3/8" | I-Beam | 1 3/4" × 1 3/8" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
15 1/2" | 1 3/4 lbs. | 1 3/8" | Flat | 1 3/4" × 1 3/4" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
24" | 3 1/2 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 000000 |
30" | 4 1/4 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 00000 |
36" | 8 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
42" | 9 lbs. | 7/8" | Hex | 1 5/8" × 1 1/8" | 1 | Painted Steel | 000000 | 00000 |
48" | 12 1/2 lbs. | 1" | Hex | 2 1/8" × 1 5/8" | 1 | Painted Steel | 0000000 | 00000 |
60" | 15 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
Screwdriver-Style Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads while the plastic handle provides a comfortable grip.
Bar | |||||||||
---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Shaft Lg. | Weight, oz. | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
Offset Claw End | |||||||||
7 1/4" | 3 3/4" | 2 | 1/4" | Round | 7/16" | 1 | Nickel-Plated Steel | 0000000 | 00000 |
Electrical-Insulating Pry Bars
An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The end is tapered on both sides of the bar.
Bar | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Shaft Lg. | Weight, lbs. | Size | Shape | End Wd. | Material | Handle Material | Specifications Met | Each | |
Offset Wedge End | ||||||||||
36" | 8 3/4" | 8 | 1 3/8" | Round | 1" | Black-Oxide Steel | Plastic | IEC 60900, ASTM F1505 | 0000000 | 0000000 |
Wedges
Make quick height adjustments. Use wedges in pairs for parallel adjustment. Also known as fox and flange wedges.
For technical drawings and 3-D models, click on a part number.
Forked Wedges
Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components. They’re often used to separate ball joints and tie rod ends in suspension and steering systems. Also known as pickle forks.
For 11”, 12”, and 16” long wedges, strike the wide, flat base with a hammer until the forked end pries apart the joint.
The 36 1/2” long wedges have an internal sliding ram bar that eliminates the need for a hammer, making them safer for your hands. The ram bar also hits more forcefully and directly than a hammer. With interchangeable forks, these wedges allow you to choose the appropriate forks to use for the task at hand.
Wedges | 1 5/8" Replacement Forks | 2" Replacement Forks | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Thick. | Opening Wd. | Weight, lbs. | Each | Each | Each | |||
Steel | ||||||||||
11" | 1 3/4" | 1/32"-7/8" | 1 1/8" | 1 3/4 | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
11" | 2" | 1/32"-7/8" | 1 3/8" | 1 7/8 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
12" | 1 5/8" | 1/32"-7/8" | 3/4" | 1 1/4 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
12" | 2" | 1/32"-7/8" | 1" | 1 1/4 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
16" | 1 3/8" | 1/32"-7/8" | 5/8" | 1 3/4 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
16" | 1 5/8" | 1/32"-7/8" | 7/8" | 2 7/8 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
Steel with Internal Sliding Ram Bar | ||||||||||
36 1/2" | 1 5/8",2" | 1/32"-7/8" | 5/8",7/8" | 11 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Curved Wedges
These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.
When used with a tether (not included), wedges with a tether hole help keep tools close and prevent them from accidentally falling.
Nonsparking Wedges
These wedges are made of nonsparking materials. They're good for making quick height adjustments. Use in pairs for parallel adjustment. Also known as fox and flange wedges.
Aluminum-bronze wedges are Factory Mutual approved, nonmagnetic, and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Warning: Do not use these tools in direct contact with acetylene.
Lg. | Wd. | Thick. | Weight | Specifications Met | Each | |
Aluminum-Bronze | ||||||
---|---|---|---|---|---|---|
3" | 1/2" | 7/64"-1/4" | 1 oz. | FM Approved | 000000 | 000000 |
3 1/2" | 2" | 7/64"-3/8" | 7 oz. | FM Approved | 0000000 | 00000 |
4" | 3/4" | 7/64"-1/2" | 3 oz. | FM Approved | 0000000 | 00000 |
6" | 1" | 7/64"-1/2" | 7 oz. | FM Approved | 0000000 | 00000 |
6" | 1 1/2" | 7/64"-3/4" | 15 oz. | FM Approved | 0000000 | 00000 |
7" | 1 1/4" | 7/64"-1/2" | 11 oz. | FM Approved | 0000000 | 00000 |
7" | 2" | 7/64"-3/8" | 12 oz. | FM Approved | 0000000 | 00000 |
7" | 2" | 7/64"-3/4" | 1 5/8 lbs. | FM Approved | 0000000 | 00000 |
8" | 1 1/2" | 7/64"-1" | 1 3/4 lbs. | FM Approved | 0000000 | 00000 |
8" | 1 1/2" | 7/64"-1 5/8" | 2 1/2 lbs. | FM Approved | 0000000 | 00000 |
8" | 2" | 7/64"-3/4" | 1 3/4 lbs. | FM Approved | 0000000 | 00000 |
8 1/2" | 2" | 7/64"-1 1/4" | 3 lbs. | FM Approved | 0000000 | 00000 |
Beryllium Copper | ||||||
11" | 7/8" | 3/32"-7/8" | 1 1/4 lbs. | __ | 00000000 | 000000 |
Nonsparking Curved Wedges
This wedge is made of nonsparking beryllium copper. Curved wedges are often used for lifting and aligning machinery or to separate pipe flanges. Also known as a banana wedge.
When used with a tether (not included), wedges with a tether hole stay close and prevent accidental drops.
Warning: Do not use this tool in direct contact with acetylene.
Flange Spreaders with Ratcheting Handle
Unlike other flange spreaders that need to be used in pairs, it only takes one of these easy-to-use tools to separate stubborn flanges.
T-Handle Flange Spreaders
Place the hooks in flange bolt holes and turn the T-handle. These spreaders must be used in pairs for even distribution of pressure.
Wrench-Driven Flange Spreaders
Insert the support rod into a flange bolt hole and turn the hex bolt to drive the spreader. These spreaders must be used in pairs for even distribution of pressure.
Spreaders | Replacement Spreaders | |||||||
---|---|---|---|---|---|---|---|---|
For Flange Class (Pipe Size) | Wrench Size Required | Material | Finish | Color | Pair | Each | ||
150 (2-6) 300 (3/4-2 1/2) | 1 1/2" | Steel | Painted | Orange | 00000000 | 0000000 | 00000000 | 0000000 |
150 (5-16) 300 (2 1/2-6) | 1 1/2" | Steel | Painted | Orange | 00000000 | 000000 | 00000000 | 000000 |
150 (14-42) 300 (10-22) | 1 5/8" | Steel | Painted | Orange | 00000000 | 000000 | 00000000 | 000000 |
150 (22-42) 300 (16-36) | 1 5/8" | Steel | Painted | Orange | 00000000 | 00000000 | 00000000 | 000000 |
Multitools
An alternative to Swiss Army knives, these contain a variety of tools aside from knives for use on the go. These tools are made with stainless steel, so they resist corrosion.
Multitools | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Replacement Blades | ||||||||||||||
No. of Tools | Tools Included | Tool Material | Closed Lg. | Overall Lg. | Lg. | Wd. | Material | Color | Features | Each | Pkg. Qty. | Pkg. | |||
A | 8 | Bottle Opener, Large Slotted Screwdriver, Nail Puller, Pry Bar, Small Slotted Screwdriver, Utility Blade, Wire Cutter, Wire Stripper | Stainless Steel | 4 1/4" | 5" | 4 1/4" | 1 1/4" | Stainless Steel | Gray | Key Chain Hole | 0000000 | 000000 | 5 | 00000000 | 00000 |
B | 8 | 1/4" Phillips Screwdriver, Awl/Punch, Bottle Opener, Hammer, Large Scissors, Pry Bar, Small Slotted Screwdriver, Smooth-Edge Knife | Stainless Steel | 3 5/8" | 6 1/2" | 3 5/8" | 11/16" | Stainless Steel | Gray | __ | 0000000 | 00000 | __ | 000000 | 00 |
C | 10 | Bottle Opener, Chisel, Large Slotted Screwdriver, Metal/Wood File, Nail Puller, Precision Knife, Pry Bar, Small Scissors, Small Slotted Screwdriver, Smooth-Edge Knife | Stainless Steel | 4" | 6 5/8" | 4" | 9/16" | Stainless Steel | Gray | __ | 0000000 | 00000 | 5 | 00000000 | 0000 |
Cable Bundle Insertion Tools
Thread wires, cables, or cords into your assembled bundle without removing cable ties. Also known as wire spoons, these tools wedge between a cable tie and your material to create a gap. Slide a cable along the tool’s indent to feed it into the gap.
Handle | |||||||||
---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Tip Style | Lg. | Wd. | Material | Grip Style | Flexibility | Material | Each | |
3 3/4" | Pointed | 1 1/2" | 1" | Plastic | Cushion | Semi-Flexible | Stainless Steel | 0000000 | 00000 |