Filter by
Mount Movement
Thread Size
Thread Type
DFARS Compliance
Base Material
About Leveling Mounts
Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.
Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud
Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Three Mounting Holes
 |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Cap. per Mount, lb. | Mounting Holes | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Load | Pull | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Specs. Met | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M30 × 3.5 mm | 7 1/8" | 13,480 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/8" | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M36 × 4 mm | 7 1/8" | 21,580 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/8" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M42 × 4.5 mm | 7 5/16" | 31,470 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/4" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M48 × 5 mm | 9 1/8" | 31,470 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 13 1/2" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Four Mounting Holes
 |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Cap. per Mount, lb. | Mounting Holes | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Load | Pull | Swivel Range of Motion | Base Dia. | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Specs. Met | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M30 × 3.5 mm | 7 1/8" | 13,480 | 8,540 | 10° | 7 7/8" | No | 5/8" | 4 15/32" | NZS 4219 | 11 3/8" | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M36 × 4 mm | 7 1/8" | 21,580 | 8,540 | 10° | 7 7/8" | No | 5/8" | 4 15/32" | NZS 4219 | 11 3/8" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M42 × 4.5 mm | 7 5/16" | 31,470 | 8,540 | 10° | 7 7/8" | No | 5/8" | 4 15/32" | NZS 4219 | 11 3/4" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M48 × 5 mm | 9 1/8" | 31,470 | 8,540 | 10° | 7 7/8" | No | 5/8" | 4 15/32" | NZS 4219 | 13 1/2" | 00000000 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
