Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings.

These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

A bolt in each corner makes for a secure, even hold.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.