About Structural Adhesives
More
About Paint and Protective Coatings
More
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
DP125, 14255, and 14251 form flexible bonds.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 10 Minute Epoxy | 14251 | 1.69 | Cartridge | 10 min. | 90 min. | 2,400 | 20 | 1:1 | Thick Liquid (80,000 cP) | -65° to 200° | Clear | Metal, Plastic, Masonry, Wood | 00000000 | 000000 |
| 10 Minute Epoxy | 14255 | 1.69 | Cartridge | 10 min. | 90 min. | 2,400 | 20 | 1:1 | Paste (90,000 cP) | -65° to 200° | Black | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
| 2 Ton Epoxy | 14260 | 1.69 | Cartridge | 8 min. | 16 hrs. | 2,250 | 2 | 1:1 | Thick Liquid (8,000 cP) | -40° to 200° | Clear | Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites | 00000000 | 00000 |
| 2 Ton Epoxy | 14310 | 0.84 | Syringe | 8 min. | 16 hrs. | 2,250 | 2 | 1:1 | Thick Liquid (8,000 cP) | -40° to 200° | Clear | Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites | 0000000 | 00000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 1 Minute Epoxy | 14277 | 1.69 | Cartridge | 60 sec. | 2 hrs. | 1,600 | 2 | 1:1 | Gel (70,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 000000 |
| 5 Minute Epoxy | 14200 | 15 | Bottle | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 000000 | 00000 |
| 5 Minute Epoxy | 14240 | 0.84 | Syringe | 5 min. | 48 hrs. | 2,500 | 2 | 1:1 | Gel (Not Rated) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
| 5 Minute Epoxy | 14250 | 0.84 | Syringe | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
| 5 Minute Epoxy | 14265 | 1.69 | Cartridge | 5 min. | 48 hrs. | 2,500 | 2 | 1:1 | Gel (Not Rated) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
| 5 Minute Epoxy | 14270 | 1.69 | Cartridge | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
| 11801 | 16 | Pail | 45 min. | 24 hrs. | 2,600 | 1:1 | Putty | 40° to 250° | Gray | Submersible | Metal, Plastic, Composites | 00000000 | 0000000 |
Epoxy Structural Adhesives for Harsh Environments
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
14315 works especially well on plastics and has excellent impact resistance. It resists acids and oils.
Mfr. Model | Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Devcon Adhesives | |||||||||||||||
| HP 250 | 14315 | 1.69 fl. oz. | Cartridge | 65 min. | 7 days | 3,200 | 35 | 2:1 | Paste (105,000 cP) | -65° to 250° | Light Yellow | Corrosive, Salt Spray | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| Epoxy Plus 25 | 14278 | 1.69 | Cartridge | 25 min. | 30 hrs. | 2,750 | 20 | 1:1 | Thick Liquid (70,000 cP) | -40° to 200° | Gray | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| Plastic Welder | 14300 | 1 | Syringe | 4 min. | 24 hrs. | 3,000 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |
Wear-Resistant Coatings for Metal
Also known as brushable ceramic, these coatings create a hard, low-friction surface that resists corrosion. They're often used on liquid processing equipment, such as pump casings, impeller blades, and valves, to protect worn areas and reduce turbulence. They’re also used on heat exchangers, condensers, and chutes. The size listed is the combined total of the two parts.
Devcon Brushable Ceramic resists acids, alkalies, fuels, and solvents. Apply with a brush or roller.
Container | Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Composition | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Application Time After Mixing, min. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
Devcon Brushable Ceramic Coatings | ||||||||||||
| 11765 | 2 | Solvent Based | 40 | 16 | 15 sq. ft. @ 20 mil | 40 | 350° | 55° to 90° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | Blue (Gloss) | 00000000 | 0000000 |
Surface Fillers for Metal
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Liquid | |||||||||||||||
| 10210 | __ | 1 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
| 10220 | __ | 4 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 200 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® Epoxy | |||||||||||||||
| 52345 | 2 fl. oz. | __ | Tube | 60 | 24 | Thick Liquid | 1:1 | 14 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
| 62345 | 0.8 fl. oz. | __ | Syringe | 60 | 24 | Thick Liquid | 1:1 | 6 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
Devcon Plastic Steel® Putty | |||||||||||||||
| 10110 | __ | 1 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 40 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
| 10120 | __ | 4 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 190 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
| 10130 | __ | 25 lbs. | Pail, Can | 45 | 16 | Putty | 9:1 | 1200 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000000 |
Devcon Plastic Steel® 5 Minute Putty | |||||||||||||||
| 10240 | __ | 1 lbs. | Jar, Can | 5 | 16 | Putty | 1.7:1 | 40 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Bronze Putty | |||||||||||||||
| 10260 | __ | 1 lbs. | Jar, Can | 35 | 16 | Putty | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Bronze | __ | Machine, Drill, Sand, Saw, Tap | Brass, Bronze | 00000000 | 000000 |
Devcon Stainless Steel Putty | |||||||||||||||
| 10270 | __ | 1 lbs. | Jar, Can | 60 | 16 | Putty | 11:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 00000000 | 000000 |
Devcon FasMetal™ Putty | |||||||||||||||
| 10780 | __ | 0.75 lbs. | Jar, Can | 4 | 16 | Putty | 1:1 | 60 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Chemical-Resistant Surface Fillers for Metal
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Titanium Putty | |||||||||||||||
| 10760 | 1 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 40 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 0000000 |
| 10770 | 2 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 90 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Aluminum Liquid | ||||||||||||||
| 10710 | __ | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 0000000 |
| 10720 | __ | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon Aluminum Putty | ||||||||||||||
| 10610 | __ | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
| 10620 | __ | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | ||||||||||||||
| 19770 | 6.5 fl. oz. | __ | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 00000000 | 00000 |
Devcon Metal Patch & Fill | ||||||||||||||
| S-50 | 3 fl. oz. | __ | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | 00000000 | 0000 |
Surface Filler Patches
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
| Mfr. Model No. | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hrs. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Zip Patch™ | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 11500 | 4" | 9" | 5 | 4 | Yes | -40° to 200° | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Ceramic, Wood | 0000000 | 0000000 |
Surface Fillers for Plastic
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
| 15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 0000000 |