PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.

Sealants that meet NSF/ANSI 61 adhere to safety standards for drinking water systems.

Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Green tape is often used for oxygen.

Orange and yellow tape is commonly used to indicate fuel and gas.

Red tape is often used for water.

This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

Don't be tethered by a cord—take these guns where they're needed. Intermittent duty guns dispense glue for up to 3 minutes per charge.

These small guns get into areas larger guns can't.

Assorted adhesives for routine maintenance work or quick repairs.

No mixing required—these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing) compounds because they don’t need heat or UV light to cure.

Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.

Loctite® 587™ and 5900™ are RTV (room temperature vulcanizing).

Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to form irregular-shaped gaskets.

Loctite® 587™ is RTV (room temperature vulcanizing).

Dispense a uniform bead when you press the nozzle. Gasket maker is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and makes it easy to form irregular-shaped gaskets. It is RTV (room temperature vulcanizing).

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Make gaskets that accommodate movement. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.