We will reply to your message within an hour.
The standard for high-strength fastening.
Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.
Plastic screws are chemical and oil resistant, nonconductive, and lightweight.
18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.
Brass button head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.
18-8 stainless steel pan head screws have good chemical resistance and may be mildly magnetic.
Choose these screws for their adherence to strict military standards for material and construction.
These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.
More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.
Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.
Made from 18-8 stainless steel, these set screws have good chemical resistance.
Made from black-oxide alloy steel, these set screws resist corrosion in dry environments. They dig into hard surfaces for a secure hold and have serrations on the cup edge that grip the material surface to resist loosening.
These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.
These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.
Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.
Change thread sizes or types, such as fine to coarse threads, on parts without changing gender.
Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.
Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection.
One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.
Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.
Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.
Install these spring plungers with a screwdriver—they're slotted on one or both ends.
Install with a hex key for more torque than slotted ball-nose spring plungers.
Find thread size, screw size, diameter, and drill bit size with one tool.
Thread your fastener into holes or onto plugs for quick and accurate size identification.
Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once.
These stainless steel anchor studs offer excellent corrosion resistance.
A black-oxide finish provides mild corrosion resistance.