About Rounded Head Screws
More
18-8 Stainless Steel Narrow Cheese Head Slotted Screws
More corrosion resistant than steel, and almost as strong, these 18-8 stainless steel screws have a narrower head than pan head screws to fit into tight spaces. They’re often used in electrical panels and next to flanges and raised surfaces in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. A deep slot gives you more driving power and keeps the screwdriver from slipping. Length is measured from under the head.
Screws with an extended tip, sometimes called a full dog point, fit into a hole or slot to keep parts such as pulleys and gears aligned. Use these screws in place of dowel pins; their threads clamp your parts down and keep them from rotating.
ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Dia., mm | Lg., mm | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
Extended Tip—18-8 Stainless Steel | ||||||||||
M3 × 0.5 mm | ||||||||||
| 4 | Fully Threaded | 4.00 | 1.90 | 2 | 2.5 | 90,000 | DIN 922 | 1 | 000000000 | 00000 |
M4 × 0.7 mm | ||||||||||
| 6 | Fully Threaded | 5.50 | 2.50 | 2.8 | 4 | 90,000 | DIN 922 | 1 | 000000000 | 0000 |
M5 × 0.8 mm | ||||||||||
| 6 | Fully Threaded | 6.50 | 2.80 | 3.5 | 4 | 90,000 | DIN 922 | 1 | 000000000 | 0000 |
M6 × 1 mm | ||||||||||
| 10 | Fully Threaded | 8.00 | 3.30 | 4.5 | 4 | 90,000 | DIN 922 | 1 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||||||
| 10 | Fully Threaded | 10.00 | 4.00 | 6 | 6 | 90,000 | DIN 922 | 1 | 000000000 | 0000 |
M10 × 1.5 mm | ||||||||||
| 16 | Fully Threaded | 13.00 | 4.80 | 7.5 | 10 | 90,000 | DIN 922 | 1 | 000000000 | 0000 |
Steel Narrow Cheese Head Slotted Screws
With a narrower head than pan head screws, these cheese head screws fit in tight spaces, such as in electrical panels and next to flanges and raised surfaces. A deep slot gives you more driving power and less of a chance of the screwdriver slipping. Length is measured from under the head.
Screws with an extended tip, sometimes called a full dog point, fit into a hole or slot to keep parts such as pulleys and gears aligned. Use these screws in place of dowel pins; their threads clamp your parts down and keep them from rotating.
When choosing your finish, consider your environment. Screws with a black-oxide finish have mild corrosion resistance, but only in dry environments.
ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Dia., mm | Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Black-Oxide Steel | ||||||||||
M3 × 0.5 mm | ||||||||||
| 4 | 2 | 2.5 | Fully Threaded | 4.0 | 2.0 | 60,000 | DIN 922 | 1 | 000000000 | 00000 |
M4 × 0.7 mm | ||||||||||
| 6 | 2.8 | 4 | Fully Threaded | 5.5 | 2.6 | 60,000 | DIN 922 | 1 | 000000000 | 0000 |
M5 × 0.8 mm | ||||||||||
| 6 | 3.5 | 4 | Fully Threaded | 6.5 | 2.8 | 60,000 | DIN 922 | 1 | 000000000 | 0000 |
M6 × 1 mm | ||||||||||
| 10 | 4.5 | 4 | Fully Threaded | 8.0 | 3.3 | 60,000 | DIN 922 | 1 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||||||
| 10 | 6 | 6 | Fully Threaded | 10.0 | 4.0 | 60,000 | DIN 922 | 1 | 000000000 | 0000 |
M10 × 1.5 mm | ||||||||||
| 16 | 7.5 | 10 | Fully Threaded | 13.0 | 4.8 | 60,000 | DIN 922 | 1 | 000000000 | 0000 |