About Rounded Head Screws
More
Metric 18-8 Stainless Steel Pan Head Slotted Screws
Good for use outdoors and in washdown environments, these metric 18-8 stainless steel screws are more corrosion resistant than steel and nearly as strong. Their pan-shaped head sits nearly flat on the fastened surface, so there’s no need to countersink a hole. With domed or chamfered edges, the head of these screws won’t snag clothing when you brush against it. Length is measured from under the head.
Wide-head screws evenly distribute clamping force and eliminate the need for a washer. Use them when fastening material through a hole that’s wider than the diameter of the screw—the wide head bridges the gap. They’re also good for securing thin materials that tend to shift, since the wide head holds more of the material in place. However, it also means these screws won’t work in areas where space is limited. All meet DIN 921 for dimensional and material standards.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
Wide Head—18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
M3 × 0.5 mm | ||||||||
| 4 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 10 | 000000000 | 00000 |
| 5 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 10 | 000000000 | 0000 |
| 6 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 10 | 000000000 | 00000 |
| 8 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 10 | 000000000 | 00000 |
| 10 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 12 | Fully Threaded | 8.00 | 1.80 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
M4 × 0.7 mm | ||||||||
| 5 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 6 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 8 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 10 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 12 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 0000 |
| 16 | Fully Threaded | 12.00 | 2.40 | 70,000 | DIN 921 | 5 | 000000000 | 00000 |
M5 × 0.8 mm | ||||||||
| 6 | Fully Threaded | 16.00 | 2.70 | 70,000 | DIN 921 | 5 | 000000000 | 00000 |
| 10 | Fully Threaded | 16.00 | 2.70 | 70,000 | DIN 921 | 5 | 000000000 | 00000 |
| 12 | Fully Threaded | 16.00 | 2.70 | 70,000 | DIN 921 | 5 | 000000000 | 00000 |
| 16 | Fully Threaded | 16.00 | 2.70 | 70,000 | DIN 921 | 5 | 000000000 | 00000 |
| 20 | Fully Threaded | 16.00 | 2.70 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
M6 × 1 mm | ||||||||
| 8 | Fully Threaded | 20.00 | 3.10 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
| 10 | Fully Threaded | 20.00 | 3.10 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
| 12 | Fully Threaded | 20.00 | 3.10 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
| 20 | Fully Threaded | 20.00 | 3.10 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
| 25 | Fully Threaded | 20.00 | 3.10 | 70,000 | DIN 921 | 1 | 000000000 | 0000 |
Metric Steel Pan Head Slotted Screws
Install these metric pan head screws for a low-profile, finished look—no countersink required. With a chamfered or slightly domed head, they won't catch on clothing or straps as you pass by. A layer of zinc plating protects the steel from rust in wet areas but won't hold up to salt water and chemicals. Length is measured from under the head.
All of these screws meet DIN or ISO dimensional and material standards, so you know they'll fit with other parts and tools. Although DIN 85 is no longer active and has been superseded by ISO 1580, it's still a relevant standard that's referenced by engineers and designers. The two standards are functionally equivalent.
Wide-head screws evenly distribute clamping force and eliminate the need for a washer. While they may not fit into tight spots, they're a good option fastening thin material, or when the screw hole is much larger than the diameter of the screw.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Wide Head—Zinc-Plated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
M3 × 0.5 mm | ||||||||
| 4 | Fully Threaded | 8.00 | 1.80 | 60,000 | DIN 921 | 25 | 000000000 | 000000 |
| 5 | Fully Threaded | 8.00 | 1.80 | 60,000 | DIN 921 | 25 | 000000000 | 0000 |
| 6 | Fully Threaded | 8.00 | 1.80 | 60,000 | DIN 921 | 25 | 000000000 | 00000 |
| 8 | Fully Threaded | 8.00 | 1.80 | 60,000 | DIN 921 | 25 | 000000000 | 0000 |
| 10 | Fully Threaded | 8.00 | 1.80 | 60,000 | DIN 921 | 25 | 000000000 | 0000 |
M4 × 0.7 mm | ||||||||
| 5 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 00000 |
| 6 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 00000 |
| 8 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 0000 |
| 10 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 0000 |
| 12 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 00000 |
| 16 | Fully Threaded | 12.00 | 2.40 | 60,000 | DIN 921 | 25 | 000000000 | 00000 |
M5 × 0.8 mm | ||||||||
| 6 | Fully Threaded | 16.00 | 2.70 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
| 8 | Fully Threaded | 16.00 | 2.70 | 60,000 | DIN 921 | 10 | 000000000 | 00000 |
| 10 | Fully Threaded | 16.00 | 2.70 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
| 12 | Fully Threaded | 16.00 | 2.70 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
| 16 | Fully Threaded | 16.00 | 2.70 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
M6 × 1 mm | ||||||||
| 8 | Fully Threaded | 20.00 | 3.10 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
| 10 | Fully Threaded | 20.00 | 3.10 | 60,000 | DIN 921 | 10 | 000000000 | 00000 |
| 12 | Fully Threaded | 20.00 | 3.10 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
| 16 | Fully Threaded | 20.00 | 3.10 | 60,000 | DIN 921 | 10 | 000000000 | 00000 |
| 20 | Fully Threaded | 20.00 | 3.10 | 60,000 | DIN 921 | 10 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||||
| 10 | Fully Threaded | 25.00 | 3.80 | 60,000 | DIN 921 | 5 | 000000000 | 00000 |
| 12 | Fully Threaded | 25.00 | 3.80 | 60,000 | DIN 921 | 1 | 000000000 | 0000 |
| 16 | Fully Threaded | 25.00 | 3.80 | 60,000 | DIN 921 | 1 | 000000000 | 0000 |
| 20 | Fully Threaded | 25.00 | 3.80 | 60,000 | DIN 921 | 10 | 000000000 | 00000 |
M10 × 1.5 mm | ||||||||
| 12 | Fully Threaded | 30.00 | 4.75 | 60,000 | DIN 921 | 1 | 000000000 | 00000 |
| 14 | Fully Threaded | 30.00 | 4.75 | 60,000 | DIN 921 | 1 | 000000000 | 00000 |
| 16 | Fully Threaded | 30.00 | 4.75 | 60,000 | DIN 921 | 1 | 000000000 | 0000 |