About Tapping Screws
More
About Magnets
More
Blunt Screws for Wood
Often used for drawer slides and cabinet hardware, these screws—also known as Euro and Type B screws—create a strong hold in small, shallow holes in wood. They have a blunt tip that distributes strength throughout the entire length of the thread. They also form deep threads in materials such as particleboard, medium-density fiberboard, and hardwood. All of these screws are beveled under the head for use in countersunk holes. They require a drilled hole.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Length | Diameter | Height | Drive Size | Approximate Threads per Inch | Threading | Tapping Screw Type | Pkg. Qty. | Pkg. | |
Steel | |||||||||
1/4"  | |||||||||
| 3/8" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 00000 |
| 7/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 1/2" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 9/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 0000 |
| 13/16" | 0.295" | 3/32" | No. 2 | 11 | Fully Threaded | B | 50 | 000000000 | 00000 |
Recessed Pull Knobs
Mount these knobs in a cutout to keep them out of the way when not in use. Push the grip to extend, and push it again to recess. Use these knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of zinc, they have good corrosion resistance.
Head | Hub | ||||||
|---|---|---|---|---|---|---|---|
| For Cutout Dia., mm | Dia., mm | Ht., mm | Dia., mm | Ht., mm | Mounting Fasteners Included | Each | |
Black Nickel-Plated Zinc—Dull | |||||||
| 28 | 31 | 19 | 40 | 20 | Yes | 000000 | 000000 |
Through-Panel-Mount Connectors
Before making a permanent connection, use these connectors to test a circuit. Also known as binding posts, they mount through panels to create a connection point.
All connectors are insulated to prevent contact with panels.
Nickel-plated brass offers a good compromise between conductivity and longevity.
For technical drawings and 3-D models, click on a part number.
| For Use With | For Panel Thick. | Current Per Circuit, A | For Panel Cutout Dia. | No. of Panel Cutouts | Material | Installation | Color | Each | |
Single Hex-Head Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Bare Stranded Wire, Spade Terminals | 0.06"-0.13" | 30 | 0.31" | 1 | Nickel-Plated Brass | Wrench | Red | 0000000 | 000000 |
Single Fluted Post | |||||||||
| Banana Plugs, Bare Stranded Wire, Spade Terminals | 0.01"-0.11" | 60 | 0.43" | 1 | Nickel-Plated Brass | Hand Tighten | Black | 0000000 | 00000 |
| Banana Plugs, Bare Stranded Wire, Spade Terminals | 0.01"-0.11" | 60 | 0.43" | 1 | Nickel-Plated Brass | Hand Tighten | Red | 0000000 | 00000 |
Encased Neodymium Magnets with Threaded Stud
A steel case concentrates and focuses the magnetic field. It also protects the magnetic material. Made of neodymium, these rare earth magnets are the strongest for their size.
Style 4 includes one magnet with North pole exposed and one with South pole exposed.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Thick. | OD | Overall Ht. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Thread Size | Stud Lg. | Pkg. Qty. | 1-49 | 50-Up | |
Zinc-Plated Steel Case | |||||||||||||
| 1 | 0.2" | 0.63" | 1/2" | 18 | 1 | 175° | N42 | 8-32 | 0.3" | __ | 0000000 | 00000 | 00000 |
| 1 | 0.276" | 0.787" | 0.576" | 28 | 1 | 175° | N42 | 8-32 | 0.3" | __ | 0000000 | 0000 | 0000 |
| 1 | 0.315" | 0.984" | 0.615" | 55 | 1 | 175° | N42 | 10-24 | 3/8" | __ | 0000000 | 0000 | 0000 |
| 1 | 0.315" | 1.26" | 0.685" | 75 | 1 | 175° | N42 | 1/4"-20 | 3/8" | __ | 0000000 | 0000 | 0000 |
| 1 | 0.315" | 1.417" | 0.815" | 100 | 1 | 175° | N42 | 1/4"-20 | 1/2" | __ | 0000000 | 00000 | 0000 |
| 1 | 0.354" | 1.65" | 0.856" | 150 | 1 | 175° | N42 | 5/16"-18 | 1/2" | __ | 0000000 | 00000 | 00000 |
| 1 | 0.453" | 1 57/64" | 0.953" | 175 | 1 | 175° | N42 | 5/16"-18 | 1/2" | __ | 0000000 | 00000 | 00000 |
| 3 | 1/4" | 1/2" | __ | 6 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 1/4" | 5/8" | __ | 16 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 1/4" | 3/4" | __ | 16 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1" | __ | 26 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1 1/8" | __ | 30 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| 3 | 17/64" | 1 1/2" | __ | 35 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 00000 | 00 |
| 3 | 9/32" | 7/8" | __ | 23 | 1 | 170° | N35 | __ | __ | __ | 0000000 | 0000 | 00 |
| Pkg. | |||||||||||||
| 4 | 0.337" | 0.472" | __ | 4.4 | 1 | 180° | N42 | __ | 0.394" | 2 | 0000000 | 0000 | 00 |
| 4 | 0.394" | 0.591" | __ | 4.4 | 1 | 180° | N42 | __ | 0.453" | 2 | 0000000 | 00000 | 00 |
Nonmarring Encased Neodymium Magnets with Threaded Stud
A rubber-covered steel case concentrates and focuses the magnetic field while protecting the magnet and the mounting surface. Made of neodymium, these rare earth magnets are the strongest for their size.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | OD | Stud Lg. | Overall Ht. | Pull Rating | Max. Pull, lbs. | Sets of Poles | Min. Temperature, °F | Max. Temperature, °F | Cover Material | Thread Size | Thread Pitch, mm | 1-49 | 50-Up | |
Zinc-Plated Steel Case | ||||||||||||||
| 6mm | 31mm | 12mm | 18mm | Medium Pull (10-30 lbs.) | 20 | 4 | -40° | 170° | Rubber | M5 | 0.8 | 0000000 | 000000 | 000000 |
| 10.5mm | 50mm | 20mm | 31mm | Super Heavy Pull (>60 lbs.) | 101 | 1 | -40° | 170° | Rubber | M6 | 1 | 0000000 | 00000 | 00000 |
| 11.5mm | 64mm | 20mm | 32mm | Super Heavy Pull (>60 lbs.) | 202 | 1 | -40° | 170° | Rubber | M8 | 1.25 | 0000000 | 000000 | 00000 |
Nickel-Plated Steel Case | ||||||||||||||
| 0.24" | 1 11/16" | 1" | 1.24" | Medium Pull (10-30 lbs.) | 20 | 3 | Not Rated | 170° | Rubber | 1/4"-20 | __ | 0000000 | 00000 | 00000 |
| 5/16" | 2.57" | 1" | 1 5/16" | Heavy Pull (30-60 lbs.) | 32 | 3 | Not Rated | 170° | Rubber | 1/4"-20 | __ | 0000000 | 00000 | 00000 |
| 21/64" | 3 1/2" | 1" | 1 21/64" | Super Heavy Pull (>60 lbs.) | 100 | 6 | Not Rated | 170° | Rubber | 1/4"-20 | __ | 0000000 | 00000 | 00000 |
| 6mm | 22mm | 7mm | 13mm | Medium Pull (10-30 lbs.) | 11 | 2 | -40° | 170° | Rubber | M4 | 0.7 | 00000000 | 00000 | 00000 |
Each | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick., mm | Wd., mm | Lg., mm | Stud Lg., mm | Overall Ht., mm | Pull Rating | Max. Pull, lbs. | Sets of Poles | Min. Temperature, °F | Max. Temperature, °F | Cover Material | Thread Size | Thread Pitch, mm | 1-49 | 50-Up | |
Zinc-Plated Steel Case | |||||||||||||||
| 27.5 | 61 | 203 | 26 | 54 | Super Heavy Pull (>60 lbs.) | 670 | 2 | -40° | 170° | Rubber | M10 | 1.5 | 0000000 | 0000000 | 0000000 |
| 35 | 50 | 85 | 30 | 65 | Super Heavy Pull (>60 lbs.) | 787 | 1 | -40° | 170° | Rubber | M10 | 1.5 | 0000000 | 000000 | 000000 |