About Torque Tools
More
Electrical-Insulating Screwdrivers
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN, IEC, or ASTM standards.
Ultra-grip drivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Shaft Type | Material | Handle Material | Grip Style | Specifications Met | Each | |
| T5 | 6 1/2" | 2 7/16" | 1/8" | Standard | Plastic-Coated Steel | Plastic | Ultra Grip | IEC 60900, EN 60900, ASTM F1505 | 00000000 | 00000 |
Illuminated Cordless Bit Screwdrivers
LEDs light the tip so you can use these tools in dark areas. Bits have a different tip at each end and snap into the shaft.
Shaft | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bit Hex Shank Size, mm | Number of Sizes | Sizes Included  | Drive Size | Overall Lg. | Lg. | O'all Wd. | Shaft | Bit | Handle | Batteries Included | Each | |
| 4 | 6 | Phillips: No. 0, No. 1 Slotted: 1/16", 1/8" Torx: T5, T6 | 1/16", 1/8", No. 0, No. 1, T5, T6 | 7 1/2" | 9/16" | 9/32" | Steel | Steel | Plastic | Yes | 0000000 | 000000 |
Changeable-Shaft Factory-Set Torque Screwdrivers
Choose a handle based on torque and change shafts to use a different size or drive style. Handles are factory set to ensure you reach the same torque every time. They signal with an audible click when the set torque is reached. The torque setting cannot be adjusted. Handles have a contoured ulta grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
| Drive Size | Shaft Material | Each | |
Torx | |||
|---|---|---|---|
| T5 | Chrome-Plated Steel | 00000000 | 00000 |
Torx Bits
Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
 |  Hex |  Tamper-Resistant Hex | Phillips | Slotted | Torx |
 Square |  Drilled Spanner |  Pozidriv® |  Tamper-Resistant Torx |
| No. of Pieces | Components Included | Bits Included | Adapters Included | Each | |
1/4" Hex Shank Size—Steel | |||||
|---|---|---|---|---|---|
| 100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | 000000 | 000000 |
1/4" Hex Shank Size for Power Tools—Steel | |||||
| 50 | 50 Bits | Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. | __ | 000000 | 000000 |
Torx Bit Sets
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Adapters Included | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||
|---|---|---|---|---|---|---|
| 22 Bits 1 Adapter | Torx: T45, T50, T55 (1 3/8" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9 (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—2 ea. | 2 3/8" Lg. Bit Adapter for Power Tools | Steel | Plastic Caddy | 0000000 | 000000 |
Precise-Control Screwdrivers
Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. These tools are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
Torx | ||||||||
| T5 | 4 3/4" | 1 5/8" | 1/8" | Steel | Chrome Plated | Plastic | 00000000 | 00000 |
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 7 | T5 Torx Screwdriver—4 3/4" O'all Lg. T6 Torx Screwdriver—4 3/4" O'all Lg. T7 Torx Screwdriver—4 3/4" O'all Lg. T8 Torx Screwdriver—4 3/4" O'all Lg. T9 Torx Screwdriver—5 3/4" O'all Lg. T10 Torx Screwdriver—5 3/4" O'all Lg. T15 Torx Screwdriver—6 3/4" O'all Lg. | Steel | Chrome Plated | Plastic | __ | 00000000 | 000000 |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 000000 |
Static-Control Precise-Control Screwdriver Sets
The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
| Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms-cm. | Each | |
| 7 | T4 Torx Screwdriver—4 23/32" O'all Lg. T5 Torx Screwdriver—4 23/32" O'all Lg. T6 Torx Screwdriver—4 23/32" O'all Lg. T7 Torx Screwdriver—4 23/32" O'all Lg. T8 Torx Screwdriver—4 23/32" O'all Lg. T9 Torx Screwdriver—5 23/32" O'all Lg. T10 Torx Screwdriver—5 23/32" O'all Lg. | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |
Static-Control Precise-Control Screwdrivers
Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Static-dissipative drivers divert static electricity faster than antistatic drivers. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Electrical Properties | Specifications Met | Surface Resistivity | Each | |
Torx | |||||||||||
| T5 | 5 5/16" | 1 5/8" | 3/32" | Steel | Chrome Plated | Plastic | Static Dissipative | IEC 61340-5-1 | 106-109 ohms-cm. | 0000000 | 000000 |
Electrical-Insulating Precise-Control Screwdriver Sets
The assorted drivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They're also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Handle Material | Specifications Met | Container Type | Each | |
| 7 | T5 Torx Screwdriver—5 1/2" O'all Lg. T6 Torx Screwdriver—5 1/2" O'all Lg. T7 Torx Screwdriver—5 1/2" O'all Lg. T8 Torx Screwdriver—6 5/16" O'all Lg. T9 Torx Screwdriver—6 5/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—6 7/8" O'all Lg. | Plastic-Coated Steel | Plastic | IEC 60900, EN 60900 | Plastic Case | 00000000 | 000000 |
Electrical-Insulating Precise-Control Screwdrivers
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They’re also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Specifications Met | Each | |
Torx | ||||||||
| T5 | 5 1/2" | 1 9/16" | 3/16" | Plastic-Coated Steel | Plastic | IEC 60900, EN 60900 | 00000000 | 000000 |
L-Keys
Torque-Control Flag-Handle Keys
Often used to install carbide inserts in cutting tools, these keys have a small handle that prevents you from generating too much torque when turning a fastener.
For technical drawings and 3-D models, click on a part number.
Length | |||||||
|---|---|---|---|---|---|---|---|
| Drive Size | Overall | Shaft | Material | Finish | Handle Material | Each | |
Torx | |||||||
| T5 | 2 7/8" | 1 1/2" | Steel | Black Phosphate Coated | Rubber | 00000000 | 00000 |