We will reply to your message within an hour.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
A rubber gasket provides a watertight seal.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Protect sensitive parts from electrostatic discharge.
The magnetic base attaches to any steel surface so you can position your pan where you need it. Drain holes in the bottom of the pan prevent dirt and moisture buildup.
An aluminized finish makes these pans corrosion resistant.
Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.
Made of silicone, these trays bend to hug curves and cling to highly polished surfaces—keeping your tools right where you need them.
A lip on the back allows bin boxes to hang from rails or louvered panels.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
The ribbed wall design allows the bins to stack or nest.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.
Six compartments in one bin box let you keep items organized.
The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.
These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.
A conductive coating protects sensitive contents from electrostatic discharge.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.
Stack bin boxes up to four high without removing the casters.
These bin boxes have a sloped top and a clear lid that slides back for easy access to contents.
Turn your pail into a versatile toolbox.
Add pockets to a traffic cone for easy access to flashlights, hand tools, and small parts.
Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.
Collapse and stack containers when not in use to save valuable storage space.
These cabinets won't dent, chip, or rust.
Cabinets are stackable with others of the same width and depth.
Protect your sensitive components from electrostatic damage.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
Keep tools and small parts in place and protected from damage.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Keep an eye on inventory without opening the doors.
These cabinets have open shelves for storing larger supplies and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Racks can be used individually or stacked up to nine high.
Create storage that fits your space with these stackable bin shelves.
Bins slope slightly and have a lip to keep contents in place.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Pull out the bin boxes for easy access to contents.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.
Keep small tools and parts in these trays for easy access.
Use these bins to hold small parts.
Insert the wand of your vacuum conveyor in the port to move material out of these bins.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.