Screw Guns | McMaster-Carr

Filter by

Grip Type

For Bit Shank Type

Power Source

Manufacturer

Voltage

Torque

1.5 in·lbf to 30 in·lbf

3.1 in·lbf to 9.7 in·lbf

3.5 in·lbf to 17.4 in·lbf

3.5 in·lbf to 18.5 in·lbf

4.4 in·lbf to 16 in·lbf

9.7 in·lbf to 18.5 in·lbf

12 in·lbf to 24 in·lbf

13 in·lbf to 40 in·lbf

13 in·lbf to 70 in·lbf

14.1 in·lbf to 35.2 in·lbf

45 in·lbf to 70 in·lbf

55 in·lbf to 100 in·lbf

120 in·lbf to 840 in·lbf

Speed Control

Batteries Included

Driver Type

Motor Type

Battery Charger Included

Yes

Number of Speeds

Variable

Manufacturer Model Number

Weight

Overall Length

Battery Charger Voltage

120V AC

12V DC

18V DC

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Container Type

Air Hose ID

Torque-Limiting Mechanism

Clutch Slip

Motor Stop

Drive Type

Adjustable Shut-Off Clutch

Adjustable Slip Clutch

Certification

46 Products

About Torque Tools

Pistol Grip with 500 rpm Max. No-Load Speed

Pistol Grip with 1,000 rpm Max. No-Load Speed

Multiposition Grip

Rechargeable batteries keep these tools powered wherever you need them.

Multiposition-grip driver has a handle that pivots for a straight or pistol grip.

Pistol Grip
Number of Speeds	Max. No-Load Speed, rpm	Max. Torque, in.-lbs.	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Voltage	Batteries Included	Battery Charger Included	Manufacturer	Manufacturer Model No.		Each
Lithium Ion (Li-Ion) Battery
Variable	500	150	1/4"	7"	2.3	12V DC	Yes	Yes	Milwaukee	2401-22	0000000	0000000
Variable	1,000	Not Rated	1/4"	6 1/4"	2.2	12V DC	Yes	Yes	DeWalt	DCF610S2	0000000	000000
Multiposition Grip
Lithium Ion (Li-Ion) Battery
2	200, 600	44	1/4"	9 3/4"	1.3	4V DC	Yes	Yes	Milwaukee	2101-22	0000000	000000

Batteries
Batteries for DeWalt DCF610S2	Each	000000
Batteries for Milwaukee 2401-22 (Pkg. of 1)	Pkg.	00000
Batteries for Milwaukee 2101-22 (Pkg. of 1)	Pkg.	00000

Chargers
Chargers for DeWalt DCF610S2	000000000	Each	000000
Chargers for Milwaukee 2401-22	0000000	Each	00000
Chargers for Milwaukee 2101-22	0000000	Each	00000

Depth-Limiting Cordless Screwdrivers

Adjust the nosepiece to set the depth and prevent fasteners from being driven too deep. These drivers are good for use with soft materials such as wood, fiberboard, drywall, and insulation board. Rechargeable batteries keep them powered wherever you need them.

Depth-Limiting Cordless Screwdrivers											Batteries for DeWalt Cordless Tools		Chargers for DeWalt Cordless Tool Batteries
Number of Speeds	Max. No-Load Speed, rpm	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Voltage	Batteries Included	Manufacturer	Manufacturer Model No.		Each		Each		Each
Lithium Ion (Li-Ion) Battery
Variable	4,800	1/4"	11"	2.2	20V DC	Yes	DeWalt	DCF630D2	0000000	0000000	0000000	0000000	000000000	000000

Air-Powered Screwdrivers

Positive Clutch Drive

Direct Drive

Connect these tools to your shop air to install and remove fasteners.

Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.

Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.

Note: Air tools require lubrication to operate properly.

									Air Inlet
Number of Speeds	Max. No-Load Speed, rpm	Max. Torque, in.-lbs.	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Power Source	Recommended Operating Air Pressure, psi	Average Air Consumption	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Positive Clutch Drive
Variable	1,800	115	1/4"	7 3/4"	2.9	Air	90	4 cfm @ 90 psi	1/4	NPT	Female	3/8"	00000000	0000000
Direct Drive
Variable	1,800	125	1/4"	7"	2.3	Air	90	4 cfm @ 90 psi	1/4	NPT	Female	3/8"	00000000	000000
1	2,200	64.8	1/4"	6 1/4"	2.3	Air	90	2.5 cfm @ 90 psi	1/4	NPT	Female	3/8"	0000000	000000

High-Precision Electric Torque Screwdrivers

Push-to-Start Speed Control

Lever Speed Control

The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver. They are designed for light- to medium-volume assembly.

Motor Stops Torque Limiter
Max. No-Load Speed, rpm	Torque Range, in.-lbs.	No. of Speeds	Drive Direction	For Bit Hex Shank Size	O'all Lg.	Wt., lbs.	Duty Cycle	On/Off Time		Each
Push-to-Start Speed Control
1,200	12-24	1	Clockwise and Counterclockwise	1/4"	10"	1.5	Intermittent	0.5 Seconds On, 3.5 Seconds Off	0000000	0000000
2,000	4.4-16	1	Clockwise and Counterclockwise	1/4"	10"	1.5	Intermittent	0.5 Seconds On, 3.5 Seconds Off	0000000	000000
Lever Speed Control
2,000	4.4-16	1	Clockwise and Counterclockwise	1/4"	10"	1.5	Intermittent	0.5 Seconds On, 3.5 Seconds Off	0000000	000000

Electric Torque Screwdrivers

The clutch slips when the set torque is reached to prevent overtightening and damaging fasteners. To set torque, turn the adjustment collar.

Clutch Slips Torque Limiter
No. of Speeds	Max. No-Load Speed, rpm	Max. Torque, in.-lbs.	For Bit Hex Shank Size	O'all Lg.	Wt., lbs.	Voltage	Current, A	Cord Lg., ft.	Specifications Met	Manufacturer and Model No.		Each
Variable	1,200	140	1/4"	12"	3.6	120V AC	6.5	8	CSA Certified, UL Listed	DeWalt DW267	0000000	0000000

Air-Powered Torque Screwdrivers

Trigger Speed Control

Push-to-Start Speed Control

Lever Speed Control

Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.

Note: Air tools require lubrication to operate properly.

								Air Inlet
Number of Speeds	Max. No-Load Speed, rpm	Torque Range, in.-lbs.	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Recommended Operating Air Pressure, psi	Average Air Consumption	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Clutch Slips Torque Limiter
Trigger Speed Control
Variable	800	55-100	1/4"	9"	3	90	4 cfm @ 90 psi	1/4	NPT	Female	3/8"	0000000	0000000
Variable	900	13-70	1/4"	9 1/2"	2.9	90	17 cfm @ 90 psi	1/4	NPT	Female	1/4"	0000000	000000
Push-to-Start Speed Control
1	1,000	1.5-30	1/4"	8 3/4"	1.1	90	13 cfm @ 90 psi	1/8	NPT	Female	1/4"	0000000	000000
Lever Speed Control
Variable	1,000	1.5-30	1/4"	9 1/4"	1.1	90	13 cfm @ 90 psi	1/8	NPT	Female	1/4"	0000000	000000
Variable	1,800	45-70	1/4"	9 1/2"	1.5	90	4 cfm @ 90 psi	1/4	NPT	Female	3/8"	0000000	000000
Variable	2,100	13-40	1/4"	10"	2.6	90	16 cfm @ 90 psi	1/4	NPT	Female	1/4"	0000000	000000

High-Precision Air-Powered Torque Screwdrivers

Push-to-Start Speed Control

Lever Speed Control

The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.

Note: Air tools require lubrication to operate properly.

								Air Inlet
Max. No-Load Speed, rpm	Torque Range, in.-lbs.	Number of Speeds	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Recommended Operating Air Pressure, psi	Average Air Consumption	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Motor Stops Torque Limiter
Push-to-Start Speed Control
800	14.1-35.2	1	1/4"	8 1/4"	1.4	85	10.5 cfm @ 85 psi	1/4	NPT	Female	1/4"	0000000	000000000
1,000	3.1-9.7	1	1/4"	7 1/8"	0.7	85	5.6 cfm @ 85 psi	1/8	NPT	Female	1/4"	0000000	00000000
1,100	3.5-18.5	1	1/4"	7 1/4"	0.9	85	7 cfm @ 85 psi	1/4	NPT	Female	1/4"	0000000	00000000
Lever Speed Control
1,100	3.5-17.4	1	1/4"	8 1/4"	1.2	85	7 cfm @ 85 psi	1/4	NPT	Female	1/4"	0000000	00000000
1,100	9.7-18.5	1	1/4"	10 3/4"	1.5	85	7 cfm @ 85 psi	1/4	NPT	Female	1/4"	0000000	00000000

Cordless Impact Drivers

These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material. Some drivers include rechargeable batteries that provide power wherever you need it. For other drivers, batteries and chargers are sold separately.

For Style A-C drivers, you can add a right-angle attachment (sold separately) to extend the reach and angle of the drivers to get into hard-to-reach spots. Style C drivers with Bluetooth compatibility connect to a mobile app, so you can track their location, customize their settings, view data usage, and receive alerts before they need repair.

Style F drivers have a detachable right-angle head that can be replaced with a straight head attachment (sold separately) to convert them to a straight-line tool.

Drivers and attachments that cannot be sold to the listed areas are restricted due to product regulations.

Cordless Impact Drivers

	Manufacturer and Model No.	Voltage	Max. Torque, ft.-lbs.	No. of Speeds	Max. No-Load Speed	Overall Lg.	Weight, lbs.	Batteries Included	Number of Batteries Required	Specifications Met	Includes	Data Connection Type	Features	Cannot Be Sold To		Each
A	DeWalt DCF815S2	12V DC	80	Variable	2,450 rpm	6 1/4"	2.3	Yes	1	UL Listed	UL Listed Charger	__	Built-In Light	__	00000000	0000000
A	DeWalt DCF845B	20V DC	152	3	3,400 rpm	5 1/8"	2	No	1	__	__	__	Built-In Light	__	00000000	000000
B	Milwaukee 3453-20	12V DC	125	Variable	3,600 rpm	5"	1.6	No	1	__	__	__	Built-In Light	__	00000000	000000
B	Milwaukee 3453-22	12V DC	125	Variable	3,600 rpm	5"	2	Yes	1	__	__	__	Built-In Light	__	00000000	000000
C	Milwaukee 2957-20	18V DC	166	4	3,600 rpm	4 1/2"	2.3	No	1	__	__	Bluetooth	Built-In Light	__	00000000	000000
C	Milwaukee 2953-20	18V DC	166	Variable	3,900 rpm	4 1/2"	2.2	No	1	__	__	__	Built-In Light	__	00000000	000000
C	Milwaukee 2953-22	18V DC	166	Variable	3,900 rpm	4 1/2"	3.8	Yes	1	__	__	__	Built-In Light	__	00000000	000000
D	Makita DT04R1	12V DC	100	2	3,000 rpm	5 5/16"	2.1	Yes	1	__	__	__	Built-In Light	Outside United States	000000000	000000
D	Makita XDT14Z	18V DC	129	3	3,600 rpm	4 5/8"	1.8	No	1	__	__	__	Built-In Light	Outside United States	000000000	000000
D	Makita XDT19T	18V DC	132.5	4	3,600 rpm	4 9/16"	3.3	Yes	1	__	__	__	Built-In Light	__	000000000	000000
E	Milwaukee 2467-20	12V DC	50	Variable	2,450 rpm	11 5/16"	2.1	No	1	__	__	__	Built-In Light	__	000000000	000000
E	Milwaukee 2667-20	18V DC	56.2	2	2,250 rpm	12 1/8"	2.2	No	1	__	__	__	__	__	000000000	000000
F	Makita XLT01Z	18V DC	44.2	Variable	2,000 rpm	15 1/4"	2.5	No	1	__	__	__	Built-In Light	Outside United States	000000000	000000

Attachments

For Driver	Shape	Manufacturer and Model No.	Cannot Be Sold To		Each
A	90° Angle	DeWalt DWARA120	__	000000000	000000
B, C	90° Angle	Milwaukee 48-32-2390	__	000000000	00000
F	Straight	Makita 192440-7	Outside United States	00000000	00000

Air-Powered Impact Screwdrivers

Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.

Note: Air tools require lubrication to operate properly.

									Air Inlet
Number of Speeds	Max. No-Load Speed	Torque Range, in.-lbs.	Drive Direction	For Bit Hex Shank Size	Overall Lg.	Weight, lbs.	Recommended Operating Air Pressure	Average Air Consumption	Pipe Size	Thread Type	Gender	For Air Hose ID		Each
Pistol Grip
in.-lbs.
Variable	10,000 rpm	120-840	Clockwise and Counterclockwise	1/4"	6 5/16"	2.1	90 psi	2 cfm @ 90 psi	1/4	NPT	Female	3/8"	0000000	0000000