We will reply to your message within an hour.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
A rubber gasket provides a watertight seal.
Save storage space with these collapsible tote boxes. They collapse to one-third their overall size.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
Move and store materials in your food processing facility with these tote boxes—they have metal and chemical additives that will set off metal detectors and show up on X-ray machines if a piece falls into your line.
Hold and transport material with these boxes. They nest and stack for easy storage.
Place these boxes on top of each other to make the most of your storage or shipping space.
These tote boxes resist most chemicals, solvents, and oils.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
Keep contents secure by attaching a padlock to both ends.
Interlock the hinged lids and fasten them together with a wire seal or cable tie to securely store and transport contents.
Finger-like dividers keep your parts organized and protected while they’re processed, transported, or stored.
With a capacity of 150 lbs., these are our strongest vented tote boxes.
These tote boxes are nestable in one direction and stackable when turned in the opposite direction.
The handholds allow stacking when locked upright and nesting when pushed down.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
Use these containers in food-processing facilities.
Snap the lid closed on all sides to create an airtight and watertight seal.
With an impact-resistant shell and foam-padded interior, these cases will protect your equipment for years to come.
These versatile storage cases can be used with removable inner pouches.
Remove foam cubes to create a snug fit around equipment.
A lip on the back allows bin boxes to hang from rails or louvered panels.
Protect sensitive parts from electrostatic discharge.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
The ribbed wall design allows the bins to stack or nest.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.
The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.
Six compartments in one bin box let you keep items organized.
Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.
Stack bin boxes up to four high without removing the casters.
These bin boxes have a sloped top and a clear lid that slides back for easy access to contents.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
A conductive coating protects sensitive contents from electrostatic discharge.
These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.
The magnetic base attaches to any steel surface so you can position your pan where you need it. Drain holes in the bottom of the pan prevent dirt and moisture buildup.
An aluminized finish makes these pans corrosion resistant.
Sort small items without losing pieces, then pour the rest back into the container.
A built-in faucet allows easy draining.
These durable pans are impact, wear, chemical, stain, and stick resistant.
Freeze these pans prior to use and the internal gel will keep contents below 40° F for eight hours.
Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.
To keep items from sliding off, these pans have a molded-in, slip-resistant rubber surface. Often used in cafeterias and food-processing areas, they meet NSF/ANSI 2 standards for food equipment.
Protect sensitive equipment from electrostatic discharge.
Made of 316 stainless steel, these pans offer the best resistance to corrosion and pitting.
These lightweight pans have reinforced metal corners for durability and a coating that resists moisture, grease, and mild acids.
These pans have 1/8” diameter perforations on the sides and bottom to allow drainage and air flow.
These durable plastic pans are impact, wear, chemical, stain, and stick resistant.
The 1/4” diameter perforations on the sides and bottom allow drainage and air flow through these pans.
Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.
Collapse and stack containers when not in use to save valuable storage space.
These tubs are crack and dent resistant.
These cabinets won't dent, chip, or rust.
Cabinets are stackable with others of the same width and depth.
Protect your sensitive components from electrostatic damage.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
Keep tools and small parts in place and protected from damage.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Keep an eye on inventory without opening the doors.
These cabinets have open shelves for storing larger supplies and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Racks can be used individually or stacked up to nine high.
Create storage that fits your space with these stackable bin shelves.
Bins slope slightly and have a lip to keep contents in place.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Pull out the bin boxes for easy access to contents.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.
Insert the wand of your vacuum conveyor in the port to move material out of these bins.
Slide out the tote boxes to access stored materials.
Use these bins to hold small parts.
Store tools large and small while keeping them visible.