About Draw Latches
More
About Push-to-Close Latches
More
Snap-Arm Roller Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/130/1302a12@halfx_1692386939.png?ver=imagenotfound)
There's no need for a mating strike plate for this latch—its spring-loaded arm snaps to engage when closing the door. Open the door to release the latch.
For technical drawings and 3-D models, click on a part number.
Material | Arm Lg. | Lg. | Ht. | Projection | Mounting Hole Ctr.-to-Ctr. | Roller Material | Mounting Fasteners Included | Each | |
Zinc-Plated Steel | 2 3/4" | 1 1/4" | 1 3/4" | 1 3/4" | 1 3/8" | Rubber | Yes | 0000000 | 00000 |
Snap Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1701n11c1-h02d-digital-master1565818322-p9@halfx_637014367986601213.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1701n14-@halfx_1710268431.png?ver=imagenotfound)
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Latches with a pull tab make it easy to open your door or panel if it doesn’t have a handle.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Temp. Range, °F | Min. Pull Strength, lbs. | Mounting Hole Ctr.-to-Ctr. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Each | |
Gray Plastic | |||||||||||||
1" | 1 1/2" | 1/2" | 0° to 175° | 22 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 00000 |
Black Plastic | |||||||||||||
1" | 1 1/2" | 1/2" | 0° to 175° | 22 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 0000 |
1" | 1 1/2" | 1/2" | 0° to 175° | 56 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 0000 |
Black Plastic with Pull Tab | |||||||||||||
1" | 1 1/2" | 1 1/4" | 0° to 175° | 560 | 1 3/32" | 1 1/4" | 1 1/2" | 1 1/4" | 1 3/32" | No | M4 | 0000000 | 00000 |
Push-to-Close Latches with Edge-Pull Handle for Sliding Doors
![](/prerenderstable/mvPRE/contents/gfx/imagecache/499/4999n11-@halfx_fu3we_1713539208.png?ver=imagenotfound)
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, they have a two-piece design.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Wd. | Ht. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Each | |
Black Powder-Coated Zinc | ||||||||||||
1/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 15/16" | 2 15/16" | 2 3/16" | No | M6 | 2 3/16" | 0000000 | 000000 |
Hex-Drive Snap Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/504/5043n11-@halfx_7gexz_1718649451.png?ver=imagenotfound)
Snap these latches together to secure doors and use a hex key to open. They have a return spring that automatically snaps tight with a push and releases with a pull.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Ht. | Wd. | Dp. | Hex Size, mm | Mounting Hole Ctr.-to-Ctr. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Screw Size | Fasteners Included | Each | |
Black Plastic | 1 1/16" | 1 1/2" | 9/16" | 8 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | M4 | No | 0000000 | 000000 |
Keyed Push-to-Close Locks with Edge-Pull Handle for Sliding Doors
![](/prerenderstable/mvPRE/contents/gfx/imagecache/497/4971n11-rev@halfx_ekuwe_1723488099.png?ver=imagenotfound)
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t. Compared to cam and draw locks, these locks are more convenient because they easily latch with a single push.
Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Key No. | No. of Keys Included | For Use On | Each | |
Keyed Alike | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | 1333 | 2 | Metal, Wood | 0000000 | 000000 |
Keyed Differently | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | __ | 2 | Metal, Wood | 0000000 | 00000 |
Two-Way-Drive Snap Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/494/4945n11-f@halfx_1711056548.png?ver=imagenotfound)
Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.
For technical drawings and 3-D models, click on a part number.
Snap-Down Draw Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i12/i121-13295al1-1609953326-p9@halfx_637455285551395643.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a101-@halfx_1709329415.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a103-@halfx_1710510878.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a105-@halfx_1709329427.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a52p1-h02d-digital@halfx_637020816047867102.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a53-@halfx_637025964673408272.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a54-@halfx_637025965327880323.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a101-@halfx_1709324019.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a103-@halfx_1709324020.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/132/13295a105-@halfx_1709324021.png?ver=imagenotfound)
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
Style A, B, and C latches are best for flat applications.
Style D latches reach around outside corners to draw perpendicular surfaces together.
Style E latches are for use on offset panels. Mount them on the edge of one panel and then snap them down to hold a parallel panel that’s recessed inside a mounting frame.
Style F latches are for use on inside corners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Material | Mounting Plate Material | Appearance | Latching Distance | Lg. | Wd. | Arm Wd. | Mounting Plate Lg. | Capacity | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Pkg. Qty. | Pkg. | |
A | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 1/8" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 000000 |
A | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 1/8" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
B | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 00000 |
B | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 5/16" | 2 3/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
C | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 5/16" | 2 1/2" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 00000 |
C | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 5/16" | 2 1/2" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
D | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 13/16" | 1 5/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
D | 304 Stainless Steel | 450 Stainless Steel | Polished | 13/16" | 1 5/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |
E | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 1/4" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
E | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 1/4" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |
F | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 11/16" | 2" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
F | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 11/16" | 2" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |
Storm Door Knobs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8765t12p1-h02b-digital@halfx_637014179796601544.png?ver=imagenotfound)
This knob can lock with a button from the inside.
For technical drawings and 3-D models, click on a part number.
Knob | Inside Handle | |||||||
---|---|---|---|---|---|---|---|---|
For Door Thick. | Dia. | Projection | Lg. | Projection | Finish | Mounting Hardware Included | Each | |
3/4"-1 1/8" | 1 5/8" | 1 7/8" | 4 1/4" | 1 1/2" | Painted Silver | Yes | 00000000 | 000000 |
Storm Door Handles
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8765t11p1-h02b-digital@halfx_637014303471380895.png?ver=imagenotfound)
These handles can lock with a button from the inside.
For technical drawings and 3-D models, click on a part number.
Handle | Inside Handle | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Door Thick. | Lg. | Wd. | Projection | Lg. | Wd. | Projection | Mounting Hardware Included | Choose a Finish | Each | |
3/4"-1 1/4" | 6" | 7/8" | 1 1/2" | 2 1/4" | 2 1/4" | 1 1/2" | Yes | 0000000 | 000000 |