We will reply to your message within an hour.
Lock the blade in three different positions to scrape straight ahead or at an angle.
Clean and scrape off sealant and gaskets—the plastic blade on these scrapers won't scratch delicate surfaces.
These have a screwdriver-style molded-plastic handle for a firm, comfortable hold.
Made of carbide, the blades stay sharp longer than steel blades.
Pry, chisel, and scrape with one tool.
These scrapers have four-sided blades for longer life—when you need a new edge, turn the blade 90°.
The blade is ceramic so it stays sharper longer than steel and won't rust. It's chemical resistant, nonmagnetic, and nonconductive.
Made of aluminum-bronze, these scrapers are FM approved for use in hazardous environments. They're nonmagnetic, corrosion-resistant, and inhibit sparking.
Sliding hammer action gives you 150 lbs. of impact per square inch for your toughest scraping jobs.
Made of aluminum-bronze, these nonmagnetic, corrosion-resistant scrapers inhibit sparking. They're FM approved for use in hazardous environments.
Remove solidified adhesives, waxes, and sealants with a heated blade.
Use these blades with your reciprocating saw to scrape away glue, tar, and other hard-to-remove substances.
Turn your reciprocating saw into a scraper powerful enough to remove glue, tar, and other hard-to-remove substances.
Scrape away gaskets, undercoatings, and other tough-to-remove materials with the power of 4,800 strokes per minute.
Remove paint and rust from hard-to-reach areas.
Use as a spreader, scraper, and paint-roller cleaner.
Spread and scrape material from a distance—these putty knives have a threaded end for attaching handles to extend their reach.
Spread adhesive, thinset, and other hard-to-clean materials without scratching your surface and then simply throw these knives away.
Scrape, cut, and spread material in your food-processing facility with these putty knives—they’re FDA compliant for direct contact with food. Made from plastic, they won’t scratch metal surfaces or corrode from chemicals.
Resist heat up to 410° F with a glass-filled nylon blade and handle.
The blade is nonsparking with a beveled edge for removing thin coatings.
Spread, scrape, and clean paint rollers in hazardous locations with the nonsparking, nonmagnetic brass blade on this putty knife.
Add any standard threaded handle to extend the reach of these putty knives.
These corrosion-resistant putty knives spread, scrape, and clean paint rollers.
Flatten air bubbles, smooth wrinkles, and squeeze out excess primer fluid when applying films and sheets to a surface.
These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.
A thin, flexible blade makes easy work of smoothing and feathering drywall compound.
The blades on these spatulas are flexible, self-sharpening, and won't absorb odors.
A flexible, nonscratching, silicone blade lets you wipe irregular and rounded surfaces.
Assign colors to avoid cross contamination. A channel-free blade prevents debris from getting stuck inside the blade.
Designed for use in food-processing environments, these squeegees have a channel-free blade that prevents debris from getting stuck inside.
The neoprene blade resists ink, oils, coolants, and most solvents while the vinyl blade provides cushion.
A quick-release thumb lever allows you to move the channel off-center.
Clean with the sponge and then wipe dry with the attached squeegee.
Clear away debris and water with one tool.
Assign colors to avoid contamination in food-service and hospital environments. A one-piece design keeps food from sticking between the blade and frame.
PVC blades resist oil, grease, and solvents.
A scraper removes tough debris.
A brush on one side allows you to scrub and dislodge debris.
FDA compliant for direct contact with food, these squeegees are good for use in food-service and hospital environments. They have a nonmarking blade and a sanitary handle.
EPDM rubber blades make these squeegees safe to use on light-colored floors.
An economical choice.
A nonsparking aluminum frame allows you to safely move volatile liquids. The blades resist oil, gasoline, and most chemicals.