Made with ceramic or coated with titanium nitride (TiN), the blades on these scissors stay sharp longer than uncoated stainless steel and steel blades.

For a long-lasting cutting edge that's three times harder than uncoated stainless steel, the blades on these scissors are titanium bonded over stainless steel.

Make quick, repeat cuts without tiring your hand—a spring-action band opens these scissors automatically.

Minimize hand fatigue with a lightweight handle and spring-action that automatically opens the blades for quick repeat cuts.

S-shaped handles keep your hand clear of material, so you can cut flush against flat surfaces.

Make intricate cuts with scissors that minimize hand fatigue and avoid dulling over time.

The blades have narrow, sharp tips for precise trims and detailed cuts.

For extra leverage to cut through tough materials such as leather, rope, and thick cardboard, these scissors have long handles and short blades.

Prevent punctures while cutting with the ball-point tip.

These small scissors have narrow, sharp tips for fine cutting and trimming.

Short blades make these scissors easy to maneuver in cramped areas for small, detailed cuts less than an inch long.

Cut through the strong fibers of Kevlar.

Also known as tinners' snips, these cutters make straight cuts and curves.

Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.

Replace blades as they wear. These cutters are also known as tinners' snips.

Made from aluminum bronze, the blade and handle on these cutters inhibit sparking and are FM approved. Use them for straight cuts.

Keep your hand away from the material being cut.

Blades are high-speed steel so they stay sharp longer than steel blades, and they can be sharpened.

Snip tighter curves in smaller spaces than standard high-force cutters.

This cutter has two blades that cut a 1/8" wide strip—peel it back for smooth edges with little distortion.

Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.