Uneven Surface Scaffolds
Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height. You can change the plank height in 4" increments; use the spring-loaded pins to lock it in place.
Base sections have positioning guides that hold the plank within the frame. Sections roll on four locking swivel casters; install base plates (sold separately) when used on stairs. Do not stack more than two add-on height sections per base section.
Guardrail/toeboard kits are required by OSHA when add-on height sections are used.
Outriggers are required by OSHA when add-on height sections are used. They extend the base by 20" per side.
Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
Plank | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Lg., ft. | Wd. | Ht. | Platform Ht. | Cap., lbs. | Material | Color | Wheel Configuration | No. of Wheel Brakes | Assembled or Unassembled | Includes | Specifications Met | Each | |
| 6' | 28 1/2" | 6 | 29 1/2" | 79" | 6'4" | 1,000 | Powder-Coated Steel | Yellow | Four Swivel Casters | 4 | Unassembled | Plywood Plank, Two End Frames with Adjustable Legs | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1910.29 | 0000000 | 0000000 |
| 8' | 28 1/2" | 8 | 29 1/2" | 78" | 6'4" | 1,000 | Powder-Coated Steel | Yellow | Four Swivel Casters | 4 | Unassembled | Plywood Plank, Two End Frames with Adjustable Legs | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1910.29 | 0000000 | 000000 |
Wheel | Stem | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Dia. | Lg. | Wheel/Tread Material | Caster Type | Each | |
| 5" | 1 1/8" | 6 1/4" | 150 | 5/8" | 2" | Rubber | Swivel with Brake | 0000000 | 000000 |
Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg., ft. | Ht. | with One Add-On Ht. Section | with Two Add-On Ht. Sections | Material | Color | Assembled or Unassembled | Includes | Specifications Met | Each | |
| 6 | 72" | 850 | 700 | Powder-Coated Steel | Yellow | Unassembled | Plywood Plank, Two End Frames | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1910.29 | 0000000 | 0000000 |
| 8 | 72" | 850 | 700 | Powder-Coated Steel | Yellow | Unassembled | Plywood Plank, Two End Frames | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1910.29 | 0000000 | 000000 |
| Lg. | Wd. | Each | |
| 4 5/8" | 4 5/8" | 0000000 | 000000 |
| Wheel Configuration | Brake Type | No. of Wheel Brakes | Includes | Each | |
| Four Swivel Casters | Wheel Brake | 4 | Four Outriggers | 0000000 | 0000000 |
Scaffolds
These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach. Each scaffold requires three planks (sold separately). Scaffolds are only OSHA compliant when used with two or more planks on a work level.
Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd., ft. | Material | Color | Cap., lbs. | Toeboard Ht. | Wheel Configuration | No. of Wheel Brakes | Assembled or Unassembled | Includes | Specifications Met | Each | |
7-ft. Lg. | ||||||||||||
| 10'10" | 5 | Painted Steel | Black | 2,000 | 4" | Four Swivel Casters | 4 | Unassembled | Bottom Diagonal Brace, Four Cross Braces, Four End Frames, Guardrail Posts, Guardrail/Midrail, Midside Rail, Toeboard, Top Rail | OSHA Compliant 29 CFR 1926.451, ANSI/ASSP A10.8 | 0000000 | 000000000 |
| 8'7" | 5 | Painted Steel | Black | 2,000 | __ | Four Swivel Casters | 4 | Unassembled | Bottom Diagonal Brace, Guardrail Posts, Guardrails/Midrails, Midside Rail, Two Cross Braces, Two End Frames | OSHA Compliant 29 CFR 1926.451, ANSI/ASSP A10.8 | 0000000 | 00000000 |
10-ft. Lg. | ||||||||||||
| 10'10" | 5 | Painted Steel | Black | 2,000 | 4" | Four Swivel Casters | 4 | Unassembled | Bottom Diagonal Brace, Four Cross Braces, Four End Frames, Guardrail Posts, Guardrail/Midrail, Midside Rail, Toeboard, Top Rail | OSHA Compliant 29 CFR 1926.451, ANSI/ASSP A10.8 | 0000000 | 00000000 |
| 8'7" | 5 | Painted Steel | Black | 2,000 | __ | Four Swivel Casters | 4 | Unassembled | Bottom Diagonal Brace, Guardrail Posts, Guardrails/Midrails, Midside Rail, Two Cross Braces, Two End Frames | OSHA Compliant 29 CFR 1926.451, ANSI/ASSP A10.8 | 0000000 | 00000000 |
Rail | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Plank Tread | Wd. | Ht. | Ht. | Material | Cap., lbs. | Wt., lbs. | Features | Specifications Met | Each | |
7-ft. Lg. | |||||||||||
Aluminum | Perforated | 19 1/16" | 3" | 3" | Aluminum | 250 | 25 | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| Plywood | Smooth | 19 1/16" | 3 1/2" | 3 1/2" | Aluminum | 250 | 27 | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
10-ft. Lg. | |||||||||||
| Aluminum | Perforated | 19 1/16" | 4" | 4" | Aluminum | 250 | 43 | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| Plywood | Smooth | 19 1/16" | 4 1/2" | 4 1/2" | Aluminum | 250 | 47 | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| Component | Material | Each | |
| Cross Brace for 7-ft. Plank Lg. | Zinc-Plated Steel | 0000000 | 000000 |
| Cross Brace for 10-ft. Plank Lg. | Zinc-Plated Steel | 0000000 | 00000 |
| Bottom Diagonal Brace for 7-ft. Plank Lg. | Galvanized Steel | 0000000 | 00000 |
| Bottom Diagonal Brace for 10-ft. Plank Lg. | Galvanized Steel | 0000000 | 00000 |
| End Frame | Red Painted Steel | 0000000 | 000000 |
| Toggle Pin | Steel | 0000000 | 0000 |
| Coupling Pin | Steel | 0000000 | 0000 |
| Spring Clip | Steel | 0000000 | 0000 |
| Locking Swivel Caster | Zinc-Plated Steel | 0000000 | 00000 |
| Base Plate (5" × 5") | Zinc-Plated Steel | 0000000 | 00000 |
| Adjusting Screw | Zinc-Plated Steel | 0000000 | 00000 |
Adjustable Scaffolds
These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach. Height adjusts in 2" increments. Powder-coated steel means these scaffolds can be used outdoors and in damp areas.
Note: Scaffolds meet OSHA dimensional standards and CAL-OSHA standards for use in California. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.
Plank | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Lg. | Wd. | Platform Ht., ft. | Guardrail Ht. | Cap., lbs. | Color | Wheel Configuration | No. of Wheel Brakes | Assembled or Unassembled | Includes | Specifications Met | Each | |
Powder-Coated Steel | |||||||||||||||
| 6' | 29" | 5'6"-9'6" | 72" | 29" | 2-6 | 42" | 1,000 | Yellow | Four Swivel Casters | 4 | Unassembled | Guardrail, Guardrail Posts, Plywood Plank, Two End Frames, Two Horizontal Braces | OSHA Compliant 29 CFR 1926.450, OSHA Compliant 29 CFR 1926.451, Cal/OSHA Compliant Title 8 Section 1621, Cal/OSHA Compliant Title 8 Section 1646, ANSI/ASSP A10.8 | 0000000 | 0000000 |
Folding Scaffolds
Fold these scaffolds for easy transport and storage. Height adjusts in 12" increments. Tighten the back brace bolts to lock the plank in place. Planks are grit coated for good slip resistance.
You are responsible for adhering to local, state, and federal safety codes, including OSHA.
Plank | Overall | Folded | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Platform Ht. | Lg. | Wd. | Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Cap., lbs. | Color | Wheel Configuration | No. of Wheel Brakes | Assembled or Unassembled | Includes | Specifications Met | Each | |
Powder-Coated Steel | |||||||||||||||||
| 12"-48" | 51" | 10" | 51" | 24" | 51" | 4" | 24" | 51" | 400 | Yellow | Four Swivel Casters | 4 | Unassembled | Two Grit-Coated Steel Planks | OSHA Compliant 29 CFR 1926.451, ANSI/ASSP A10.8 | 0000000 | 0000000 |
Easy-Adjust Scaffolds
Turn the winch on these scaffolds to adjust the platform height from two to eleven feet in 6" increments. Plank has a perforated surface for good slip resistance. Spring-loaded pins lock it in place. Scaffold can be assembled by one person without tools.
Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Plank | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. (A) | Lg. | Wd. | Platform Ht. (B), ft. | Guardrail Ht. | Color | Cap., lbs. | Wheel Configuration | No. of Wheel Brakes | Assembled or Unassembled | Includes | Specifications Met | Each | |
Painted Steel | |||||||||||||||
| 5'8" | 19" | 9'10 1/4"-14'8" | 76 1/2" | 31 1/2"-72" | 2-11 | 43" | Yellow | 550 | Four Swivel Casters | 4 | Unassembled | Beam Assembly, Guardrail, Perforated Steel Plank, Safety Chains, Two Diagonal Braces, Two End Frames | ANSI/ASSP A10.8, ASME B30.19, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.450 | 0000000 | 000000000 |
| Ht., ft. | Color | Assembled or Unassembled | Includes | Each | |
Painted Steel | |||||
|---|---|---|---|---|---|
| 12 1/2-17 1/2 | Yellow | Unassembled | Four Diagonal Braces, Two End Frames | 0000000 | 0000000 |
Scaffold Planks for Harsh Environments
Aluminum is a good choice for damp areas and outdoor use. Hooks with a 2" opening at each end secure planks to end frames. Rungs on the underside are for use as hand grips. Planks have a perforated surface for slip resistance and to reduce debris buildup. End hooks are offset to allow for continuous planking of large scaffolds.
Note: Length is measured from center-to-center of end hooks.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Rail | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Ht. | Material | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Aluminum | ||||||||||||
| 7 | 19 1/16" | 3" | 250 | Perforated | 3" | Aluminum | 25 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 8 | 19 1/16" | 4" | 250 | Perforated | 4" | Aluminum | 34 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 10 | 19 1/16" | 4" | 250 | Perforated | 4" | Aluminum | 43 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
Scaffold Planks
Hooks with a 2" opening at each end secure planks to end frames. Rungs on the underside are for use as hand grips. Plywood is 1/2" thick.
Note: Length is measured from center-to-center of end hooks.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Rail | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Ht. | Material | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Plywood | ||||||||||||
| 7 | 19 1/16" | 3 1/2" | 250 | Smooth | 3 1/2" | Aluminum | 27 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 8 | 19 1/16" | 4 1/2" | 250 | Smooth | 4 1/2" | Aluminum | 38 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 10 | 19 1/16" | 4 1/2" | 250 | Smooth | 4 1/2" | Aluminum | 47 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
Planks, Guardrails, and Toeboards
Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards. They also work well between trestles, ladder jacks, and ladder scaffolding supports. Rungs on the underside are for use as hand grips.
Planks have a slip-resistant surface for sure footing. The vinyl end caps protect against sharp edges and act as hand grips.
Guardrails mount to either side of the plank with the upper rails 38" to 42" above the plank surface.
Toeboards mount to either side of the plank. They clamp to guardrail posts.
Note: Planks, guardrails, and toeboards meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Ht. | Wt., lbs. | Material | Plank Tread | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
500-lb. Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|
14" Wd. | |||||||||
| 8 | 4" | 27 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 12 | 4" | 40 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 58 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 85 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
20" Wd. | |||||||||
| 8 | 4" | 33 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 48 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 70 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 102 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 121 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
24" Wd. | |||||||||
| 8 | 4" | 38 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 56 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 81 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 115 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 138 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
28" Wd. | |||||||||
| 8 | 4" | 41 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 60 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 124 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 147 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
750-lb. Capacity | |||||||||
28" Wd. | |||||||||
| 12 | 4" | 71 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 103 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 20 | 5" | 128 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 161 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| For Plank Lg., ft. | Material | Mounting Hardware Included | Assembled or Unassembled | Includes | Specifications Met | Each | |
| 8 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 0000000 |
| 12 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 16 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 20 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| For Plank Lg., ft. | Toeboard Ht. | Material | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
| 8 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 12 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 00000 |
| 16 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 20 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| For Plank Wd. | Toeboard Ht. | Material | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
| 20", 24", 28" | 3 1/2" | Aluminum | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 0000000 |
Extension Planks
For use with ladder jacks, trestle ladders, and walkways, adjust the length of these planks in 12" increments. They have a ribbed surface for slip resistance. Planks have a spring-set lock to secure the extended position. Automatic stops prevent overextending, and end flanges maintain rigidity.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Aluminum | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 6-9 | 14" | 2" | 250 | Ribbed | 31 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 0000000 |
| 8-13 | 14" | 2" | 250 | Ribbed | 41 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 000000 |
| 10-17 | 14" | 2" | 250 | Ribbed | 57 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 000000 |
Ladder Plank Supports
Also known as ladder jacks, these supports hold a plank between two straight or extension ladders to create a scaffold. Supports fit round or D-rungs, attaching to three rungs on each ladder. Use the adjustment notches to set the angle of the plank. Capacity is 500 lbs. per pair.
Note: Ladders and planks must have a minimum 250-lb. capacity.
| For Max. Plank Wd. | For Ladder Type | For Step Shape | Features | Pair | |
| 18" | Extension, Straight | Round, Flat | Eight Angle Adjustment Notches | 0000000 | 0000000 |
Telescoping Multifunction Ladders
These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands. When used as scaffolding stands, 12" wide planks (not included) must be placed 3 feet from the ladder base.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Scaffold brackets (sold separately) are required to use these ladders as scaffolding stands.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed when used as a straight ladder.
Step | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Ht. (Ladder Configuration) | Overall Wd. | No. of Steps | Material | Tread | Wheel Configuration | Specifications Met | Each | |
Aluminum | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 6 ft.-11 ft. (Step), 13 ft.-23 ft. (Straight), 6 ft. (Scaffold) | 29" | 22 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | ||||||||
| 4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold) | 24" | 14 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 10 ft.-18 ft. (Straight), 5 ft. (Scaffold) | 27" | 18 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
Fiberglass | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 3 ft.-5 ft. (Step), 6 ft.-10 ft. (Straight), 3 ft. (Scaffold) | 29" | 10 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 11 ft.-19 ft. (Straight), 5 ft. (Scaffold) | 29" | 18 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| Scaffold Brackets for Fiberglass Ladders | 0000000 | Pair | 000000 |