Hole Saws
For 9/16"-1 3/16"
Dia. Saws
for 1 1/4" Dia.
Saws or Greater
These standard saws have high-speed steel teeth to make circular cuts in wood, plastic, and metal. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | For Arbor Thread Size  | Each | Each | Each | Each | Each | |||||
1 5/8" Cutting Dp. | |||||||||||
| 20mm | 1/2"-20 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| 25mm | 1/2"-20 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 30mm | 1/2"-20 | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Saws | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | For Arbor Thread Size | Each | Each | Each | Each | ||||
1 5/8" Cutting Dp. | |||||||||
| 35mm | 5/8"-18 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| 40mm | 5/8"-18 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 45mm | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 50mm | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 68mm | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| 75mm | 5/8"-18 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
1 7/8" Cutting Dp. | |||||||||
| 55mm | 5/8"-18 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Hole Saws for Sheet Metal
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel. Use these saws on a drill or drill press. An arbor (sold separately) is required.
Arbors with pilot drill guide your cut.
Arbors with spring-loaded pilot pins push out the slug as you cut. They require a drilled pilot hole.
For technical drawings and 3-D models, click on a part number.
Saws | Arbor with Pilot Drill | Replacement Pilot Drill | Arbor with Spring-Loaded Pilot Pin | Replacement Spring-Loaded Pilot Pin | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | For Arbor Thread Size | Each | Shank Size | Each | Each | Shank Size | Each | Each | |||||
| 6mm | 3/8"-24 | 0000000 | 000000 | __ | 000000 | 00 | 000000 | 00 | 3/8" | 0000000 | 000000 | 0000000 | 00000 |
| 7mm | 3/8"-24 | 0000000 | 00000 | __ | 000000 | 00 | 000000 | 00 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 8mm | 3/8"-24 | 0000000 | 00000 | __ | 000000 | 00 | 000000 | 00 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 9mm | 3/8"-24 | 0000000 | 00000 | __ | 000000 | 00 | 000000 | 00 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 10mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 000000 | 0000000 | 000000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 11mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 12mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 13mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 14mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 15mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 16mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 17mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 18mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 19mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 20mm | 3/8"-24 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 00000 | 3/8" | 0000000 | 00000 | 0000000 | 0000 |
Hole Saw Kits for Sheet Metal
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. All saws are made entirely of heat-treated high-speed steel for cutting aluminum, brass, bronze, and steel. Attach hole saws to a drill or drill press with the included arbors.
For technical drawings and 3-D models, click on a part number.
Material | |||||||
|---|---|---|---|---|---|---|---|
| No. of Saws | Dia. | Cutting Dp. | Body | Tooth | Includes | Each | |
For Use On Aluminum, Brass, Bronze, Steel | |||||||
| 7 | 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm | 1/4" | Heat-Treated High-Speed Steel | Heat-Treated High-Speed Steel | 3/8" Hex-Shank Arbor with Spring-Loaded Pilot Pin, Two Extra 1/8" Diameter Pilot Pins, Center Punch, Hex Wrench, Plastic Case | 0000000 | 0000000 |
High-Speed Steel Slitting Saws
These general purpose saws are good for cutoff, slitting, and slotting applications in a wide range of materials, including aluminum, iron, and steel. Use with an arbor (sold separately).
Saws with a 2 3/4" mill dia. are also known as screw slotting saws.
For technical drawings and 3-D models, click on a part number.
Mill | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thick. | Dia. | Number of Teeth | Arbor Hole Dia. | Keyway Wd. | Material | For Use On | Each | |
| 0.5mm | 2 3/4" | 72 | 1" | 0.25" | High-Speed Steel | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel | 0000000 | 000000 |
| 1mm | 2 3/4" | 72 | 1" | 0.25" | High-Speed Steel | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 1.5mm | 2 3/4" | 72 | 1" | 0.25" | High-Speed Steel | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 2mm | 2 3/4" | 72 | 1" | 0.25" | High-Speed Steel | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 3mm | 2 3/4" | 72 | 1" | 0.25" | High-Speed Steel | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel | 0000000 | 00000 |