These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean. The cushion is FDA compliant for direct contact with food; it fits tightly around material to lessen vibration and prevents corrosion caused by metal-to-metal contact. The greater the hanger’s width, the heavier duty it is. Hangers have a threaded hole on top for mounting with threaded rod.

Silicone cushions withstand steam cleaning, as well as ozone, sunlight, and oxidation. PTFE cushions withstand most chemicals.

For technical drawings and 3-D models, click on a part number.

Connect these hangers together to organize multiple lines of pipe, tubing, and conduit. They have a tight-fitting, santoprene body that reduces vibration and prevents corrosion caused by metal-to-metal contact. The smooth surface of the rubber prevents debris buildup and makes cleaning easy.

End clamps have a top plate with a threaded hole for mounting with threaded rod and a bottom plate with hardware for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.

Stacking clamps have stacking hardware and a plate for attaching to an end clamp or to other stacking clamps. They must be connected to an end clamp to mount.

Note: All hangers must be the same length and height. Do not exceed the capacity of the individual hanger in multiple hanger applications.

For technical drawings and 3-D models, click on a part number.

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact. Hangers have a threaded nut on top for mounting with threaded rod. 304 stainless steel hangers have excellent corrosion resistance. Hangers with Buna-N cushion have three cushions to tightly grip material.

For technical drawings and 3-D models, click on a part number.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Adhesive-back mounts stick to any clean, smooth surface. All components are FDA compliant.

Two-way mounts allow ties to be inserted from opposite sides. Four-way mounts allow ties to be inserted from any side.

For technical drawings and 3-D models, click on a part number.