We will reply to your message within an hour.
More
Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.
Keep sanding sheets of various grits on hand.
A selection of 40 emery and crocus sanding sheets are included in these assortments.
The grit particles are block shaped and cut slowly to produce a polished surface on metals.
Create smooth finishes on wood with these garnet sheets.
The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.
These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.
These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.
A thicker, heavier construction than standard rolls withstands tough sanding.
The grit particles are block shaped and cut slowly.
Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.
These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.
Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.
A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.
These sheets have a long lasting diamond abrasive.
Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.
Peel and stick to your file handle. When it’s time to change the sheet, peel it off.
These sheets have a long-lasting diamond abrasive.
Quickly attach, remove, and reuse.
Press onto a compatible sanding tool or backup pad; peel off to remove.
A coating prevents dust and debris from building up on the abrasive surface.
Coated with zirconia alumina to stay sharper longer.
Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.
The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.
Holes allow dust removal when used with a vacuum sander.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
Quickly remove large amounts of material—discs with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.
Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.
Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.
Multiple layers of abrasive arranged in a pattern create highly consistent finishes.
Avoid clogs when you're removing paint or rust. The widely spaced grains on these belts give dust and debris a place to collect so they won't build up on the surface.
Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes.
Sanding belts with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina belts because of their sharp, outwardly pointed grit.
These belts last at least 50% longer and sand faster than standard ceramic alumina belts.
When you need to achieve a more consistent finish, choose nylon mesh sanding belts over paper- or cloth-backed belts.
One of the sharpest abrasives, the silicon carbide on these belts sands soft metals and nonmetals like aluminum and rubber with ease, and it generates minimal heat to prevent material buildup.
For sanding hard, nonmetal surfaces, these belts are diamonds in the rough. Their diamond abrasive is the hardest and most durable we offer—it's sharp like silicon carbide and tough like ceramic alumina.
With a flexible, cloth backing, these belts resist tearing. 16" or wider, they’re for sanding large surfaces.