About Sanding Abrasives
More
Sanding Sheets
Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood. It costs less than silicon carbide but is less sharp and takes longer to abrade.
For technical drawings and 3-D models, click on a part number.
9" × 11" | |||||
|---|---|---|---|---|---|
Large Pack | |||||
| Grit | For Use On | Abrasive Material | Pkg. Qty. | Pkg. | |
Paper Abrasive Backing | |||||
For Polished Finish | |||||
| 1600 | Steel, Wood | Aluminum Oxide | 100 | 00000000 | 0000000 |
Water-Resistant Sanding Sheets
These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. They are coated with aluminum oxide, the most common abrasive, which is hard enough to sand steel and wood.
Cushioned Sanding Pads
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 1600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
3" × 4" | ||||||
For Polished Finish | ||||||
| 1600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Sheets
A coating prevents dust and debris from building up on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Cushioned Sanding Rolls
A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes. Rolls with cloth and foam backing can be cut to length.
Silicon carbide is one of the sharpest abrasives. It cuts through soft metals and nonmetals with ease, and it generates minimal heat to prevent material buildup.
For technical drawings and 3-D models, click on a part number.
| Wd. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Grit | Lg., ft. | Each | |
For Polished Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1" | Steel, Wood | Silicon Carbide | Cloth and Foam | Tear Resistant | 1600 | 48 | 00000000 | 0000000 |
Water-Resistant Sanding Sheets for Aluminum, Soft Metals, and Nonmetals
These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Cushioned Sanding Pads for Aluminum, Soft Metals, and Nonmetals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
Cushioned Sanding Sheets for Aluminum, Soft Metals, and Nonmetals
The cushioned layer of these abrasive-embedded cloth sheets gives you more control over sanding pressure, creating finer and more consistent finishes. They resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
3" × 6" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 1600 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
6" × 12" | ||||||
For Polished Finish | ||||||
| 1600 | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Aluminum Oxide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
Cushioned Sanding Sheets for Stainless Steel and Hard Metals
The cushioned layer of these abrasive-embedded cloth sheets gives you more control over sanding pressure, creating finer and more consistent finishes. They resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
3" × 6" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
6" × 12" | ||||||
For Polished Finish | ||||||
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth | Water Resistant, Tear Resistant | 00000000 | 00000 |
Cushioned Sanding Pads for Stainless Steel and Hard Metals
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
For technical drawings and 3-D models, click on a part number.
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
|---|---|---|---|---|---|---|
For Polished Finish | ||||||
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
3" × 4" | ||||||
For Polished Finish | ||||||
| 1600 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Cushioned Sanding Rolls for Stainless Steel and Hard Metals
A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.
For technical drawings and 3-D models, click on a part number.
48 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Wd. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Grit | Each | |
For Polished Finish | |||||||
| 1" | Stainless Steel, Titanium, Steel, Iron, Nickel | Aluminum Oxide | Cloth | Tear Resistant | 1600 | 00000000 | 0000000 |
Adhesive-Back Sanding Rolls for Stainless Steel and Hard Metals
Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel. They have a slick coating that prevents debris from accumulating on the abrasive surface and keeps operating temperatures low. Cut the length you need and stick it on your sanding tool. When it’s time to change the sheet, peel it off.
Silicon carbide is one of the sharpest abrasives and generates minimal heat to prevent material buildup. Silicon carbide is better at fine finishes and polishing than ceramic alumina.
For technical drawings and 3-D models, click on a part number.
| Wd. | Lg., ft. | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Grit | Each | |
For Polished Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 3/4" | 75 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Paper | Clog Resistant | 1600 | 000000 | 000000 |
Sanding Sheets for Aluminum, Soft Metals,
and Nonmetals—Use with Sheet Sanders
Cut to convenient sizes and shapes, these fit most sheet sanders.
For technical drawings and 3-D models, click on a part number.
Adhesive-Back Sanding Discs
Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
Discs with plastic abrasive backing have a coating that prevents dust and debris from building up on the abrasive surface. They also resist deterioration when used wet.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
Plastic Abrasive Backing | ||||||||
|---|---|---|---|---|---|---|---|---|
For Polished Finish | ||||||||
| 5" | Aluminum Oxide | Clog Resistant, Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 000000 |
| 6" | Aluminum Oxide | Clog Resistant, Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 00000 |
Cushioned Adhesive-Back Sanding Discs
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 000000 |
| 6" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Cushioned Adhesive-Back Sanding Discs
for Aluminum, Soft Metals, and Nonmetals
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 000000 |
Cushioned Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 4" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 10 | 00000000 | 000000 |
| 5" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 6" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Adhesive-Back Sanding Discs for Masonry, Ceramics, and Composites
Coated with diamond grit, use these discs for sanding hard nonmetals. Diamond's exceptional hardness makes it the best choice for sanding masonry, ceramics, and composites. It lasts longer than silicon carbide and has excellent heat dissipation, preventing material buildup. These discs have a pattern of widely spaced abrasive grains that prevents dust and debris from building up on the abrasive surface.
Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Each | |
For Polished Finish | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2" | Diamond | Plastic | Clog Resistant | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 00000000 | 000000 |
| 5" | Diamond | Plastic | Clog Resistant | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 00000000 | 00000 |
| 6" | Diamond | Plastic | Clog Resistant | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Clog Resistant | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 00000000 | 000000 |
Hook and Loop Vacuum Sanding Discs
Holes allow dust removal when used with a vacuum sander.
A slick coating prevents debris from accumulating on the abrasive surface and keeps operating temperatures low. Quickly attach, remove, and reuse discs with a compatible sanding tool or backup pad (sold separately). Discs with plastic backing resist deterioration when used wet.
Add an optional cushioning pad between the disc and backup pad. It has a foam layer that conforms to bumps and crevices and distributes pressure more evenly as you sand, leaving a finer and more consistent finish.
For technical drawings and 3-D models, click on a part number.
| Dia. | For Vacuum Sander Style | Vacuum Hole Dia. | Abrasive Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
Plastic Abrasive Backing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Polished Finish | ||||||||||
| 5" | Five Hole | 7/16" | Aluminum Oxide | Clog Resistant, Water Resistant, Tear Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 000000 |
| 6" | Six Hole | 7/16" | Aluminum Oxide | Clog Resistant, Water Resistant, Tear Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 00000 |
Add one of these foam pads between your sanding disc and backup pad to create a cushioned layer while sanding. They conform to bumps or crevices and distribute pressure more evenly on your workpiece as you sand, leading to finer and more consistent finishes.
Cushioned Hook and Loop Vacuum Sanding Discs
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. Holes allow dust removal when used with a vacuum sander. These discs resist deterioration whe used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
| Dia. | For Vacuum Sander Style | Vacuum Hole Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5" | Five Hole | 3/8" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 000000 |
| For Disc Diameter | For Vacuum Sander Style | Max. Speed, rpm | Thread Size | Each | |
| 5" | Five Hole | 10,000 | 5/16"-24 | 0000000 | 000000 |
Hook and Loop Sanding Discs
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad (sold separately).
Discs with plastic backing have a coating that prevents dust and debris from building up on the abrasive surface. They also resist deterioration when used wet.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
Plastic Abrasive Backing | ||||||||
|---|---|---|---|---|---|---|---|---|
For Polished Finish | ||||||||
| 5" | Aluminum Oxide | Clog Resistant, Water Resistant, Tear Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 000000 |
| 6" | Aluminum Oxide | Clog Resistant, Water Resistant, Tear Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 0000000 | 00000 |
Cushioned Hook and Loop Sanding Discs
These discs are abrasive-embedded cloth with a cushioned layer that gives you more control over sanding pressure, creating finer and more consistent finishes. They resist deterioration when used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 10 | 00000000 | 000000 |
| 5" | Silicon Carbide | Cloth | Water Resistant | Steel, Wood | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Cushioned Hook and Loop Sanding Discs
for Aluminum, Soft Metals, and Nonmetals
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes. These discs resist deterioration when used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 50 | 00000000 | 000000 |
| 3" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 4" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 5" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 6" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Hook and Loop Vacuum Sanding Discs for
Aluminum, Soft Metals, and Nonmetals
Holes allow dust removal when used with a vacuum sander. These discs resist deterioration when used wet. Quickly attach, remove, and reuse with a compatible sanding tool or backup pad (sold separately).
For technical drawings and 3-D models, click on a part number.
| Dia. | For Vacuum Sander Style | Vacuum Hole Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5" | Five Hole | 3/8" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 000000 |
| 6" | Six Hole | 3/8" | Aluminum Oxide | Cloth | Water Resistant | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Hook and Loop Sanding Discs for Stainless Steel and Hard Metals
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad (sold separately). They resist deterioration when used wet.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | For Use With | Grit | Pkg. Qty. | Pkg. | |
For Polished Finish | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 50 | 00000000 | 000000 |
| 3" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs, Portable Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 5" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
| 6" | Silicon Carbide | Cloth | Water Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Portable Disc Sanders, Stationary Disc Sanders | 1600 | 10 | 00000000 | 00000 |
Cushioned Sanding Belts
Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece. They also have a slick coating that prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.
One of the sharpest abrasives, silicon carbide cuts through steel and wood with ease. It costs less than zirconia alumina but will not last as long.
| Wd. | Lg. | Abrasive Material | Abrasive Backing Material | For Use On | Grit | Each | |
For Polished Finish | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 12" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 00000 |
| 1/2" | 18" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 0000 |
| 1/2" | 24" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 0000 |
| 1" | 42" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 0000 |
| 2" | 72" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 00000 |
| 4" | 36" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 00000 |
| 6" | 48" | Silicon Carbide | Cloth | Steel, Wood | 1600 | 0000000 | 00000 |