We will reply to your message within an hour.
More
Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.
The grit particles are block shaped and cut slowly to produce a polished surface on metals.
These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.
These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
A coating prevents dust and debris from building up on the abrasive surface.
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.
A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.
Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.
These sheets have a long lasting diamond abrasive.
Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.
Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.
Cut the length you need, then quickly attach, remove, and reuse.
Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.
Cut to convenient sizes and shapes, these fit most sheet sanders.
Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.
These sheets have a long-lasting diamond abrasive.
Quickly attach, remove, and reuse.
Press onto a compatible sanding tool or backup pad; peel off to remove.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Holes allow dust removal when used with a vacuum sander.
The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.
Coated with diamond grit, use these discs for sanding hard nonmetals.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
These discs are abrasive-embedded cloth with a cushioned layer.
Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.
These discs have a long-lasting diamond abrasive.
Multiple layers of abrasive arranged in a pattern create highly consistent finishes.
Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece.
Use these narrow belts on hand-held sanding sticks.
Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.
Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.
This film abrades quickly and prevents material buildup.
Often used to polish optics such as mirrors and lenses.