The grit particles are block shaped and cut slowly to produce a polished surface on metals.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

The grit particles are block shaped and cut slowly.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A slick coating on these rolls prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Evenly sand two surfaces at once.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup.

Quickly attach, remove, and reuse.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

Quickly attach, remove, and reuse.

A coating prevents dust and debris from building up on the abrasive surface.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Use these sheets with pole sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with pole sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The premium abrasive stays sharp longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Coated with diamond grit, use these discs for sanding hard nonmetals.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The abrasive material on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and iron without dulling quickly.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The heavy duty construction provides more support than standard discs for heavy material removal.

Change your discs less often—the zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges.

Holes in the disc let you see the surface you’re sanding.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

These discs have 30% more flaps than standard flap sanding discs to last longer.

These discs have a harder abrasive than standard flap sanding discs for corners.

These discs have a harder abrasive than standard flap sanding discs.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

A coating prevents dust and debris from building up on the abrasive surface.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.

Multiple layers of abrasive arranged in a pattern create highly consistent finishes.

Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes.

Dense and hard, the ceramic alumina abrasive on these belts removes material faster and lasts longer than standard aluminum oxide abrasives.

For sanding hard, nonmetal surfaces, these belts are diamonds in the rough. Their diamond abrasive is the hardest and most durable we offer—it's sharp like silicon carbide and tough like ceramic alumina.

At least 16" wide, these sanding belts leave a smooth, consistent finish on large workpieces. They have an aluminum oxide abrasive, which is the most common abrasive for general use.

Use these narrow belts on hand-held sanding sticks.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.

As the outer layer wears away, new abrasive is exposed.

The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish.

Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The ceramic alumina grit in these bits is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Sand inside pipes, tubes, and hard to reach corners with these pads.

The premium abrasive stays sharp longer.

An additive in the abrasive resists heat.

The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Polish, clean, and debur deep inside tubes and cylinders.

Finish and polish metals without producing dust.

Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.

Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.

Wheels remove more material than other grinding wheels with cotton laminate.

The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.